Mechanical Engineering
Mechanical Engineering envisages the development, design, manufacturing and maintenance of machinery. The present age demands Mechanical Engineering specialists who have the capacity of adaptability and creativity in the new technical areas. Mechanical Engineers should have knowledge not only in their own specialized fields but also in wide interdisciplinary fields as well. To meet the above requirements Mechanical Engineering department offers the UG course in Mechanical Engineering and post graduate courses in Automation and Robotics and Doctoral Program in Mechanical Engineering. The department has well qualified and dedicated faculty and is known for its high academic standard, well-maintained discipline and complete infrastructure facilities. The Department has 1) Siemens Center of Excellence in the field of Automation. (2) Industry supported laboratory of Earth Moving Equipment. The Department has maintained a good rapport with Industry and R & D organizations. The Department has students’ chapters of SAE (Society of Automotive Engineers) and ISHRAE (Indian Society of Heating, Refrigerating and Air Conditioning Engineers) and ASME (American Society of Mechanical Engineers).
Vision of the Department
.
To be a premier center for mechanical Engineering education,
integrating innovation, sustainable research and human values
to address the evolving needs of society and industry
Mission of the Department
.
Department is dedicated to:
- Nurture Mechanical Engineering professionals with technical expertise.
- Evolve mindset of innovation, and social responsibility.
- Holistic development and driving sustainable solutions in
both industry and society.
PO1: Engineering Knowledge Apply knowledge of mathematics, natural science, computing, engineering fundamentals and an engineering specialization as specified in WK1 to WK4 respectively to develop to the solution of complex engineering problems.
PO2: Problem AnalysisIdentify, formulate, review research literature and analyse complex engineering problems reaching substantiated conclusions with consideration for sustainable development. (WK1 to WK4)
PO3: Design/Development of Solutions Design creative solutions for complex engineering problems and design/develop systems/ components/ processes to meet identified needs with consideration for the public health and safety, whole-life cost, net zero carbon, culture, society and environment as required. (WK5)
PO4: Conduct Investigations of Complex Problems Conduct investigations of complex engineering problems using research-based knowledge including design of experiments, modelling, analysis & interpretation of data to provide valid conclusions. (WK8)
PO5: Engineering Tool Usage Create, select and apply appropriate techniques, resources and modern engineering & IT tools, including prediction and modelling recognizing their limitations to solve complex engineering problems. (WK2 and WK6)
PO6: The Engineer and The World Analyze and evaluate societal and environmental aspects while solving complex engineering problems for its impact on sustainability with reference to economy, health, safety, legal framework, culture and environment. (WK1, WK5, and WK7)
PO7: Ethics Apply ethical principles and commit to professional ethics, human values, diversity and inclusion; adhere to national & international laws. (WK9)
PO8: Individual and Collaborative Team Work Function effectively as an individual, and as a member or leader in diverse/multi-disciplinary teams.
PO9: Communication Communicate effectively and inclusively within the engineering community and society at large, such as being able to comprehend and write effective reports and design documentation, make effective presentations considering cultural, language, and learning differences.
PO10: Project Management and Finance Apply knowledge and understanding of engineering management principles and economic decision-making and apply these to one’s own work, as a member and leader in a team, and to manage projects and in multidisciplinary environments.
PO11: Life-Long Learning Recognize the need for, and have the preparation and ability for i) independent and life-long learning ii) adaptability to new and emerging technologies.
WK1: Understanding of natural and social sciences.
WK2: Mathematics, numerical analysis, data analysis, and computing.
WK3: Engineering fundamentals.
WK4: Specialized engineering knowledge.
WK5: Engineering design and operations, including sustainability.
WK6: Engineering practice (technology).
WK7: Role of engineering in society, sustainability, and professional responsibility.
WK8: Current research literature and critical thinking.
WK9: Ethics, professional responsibilities, and inclusive behaviour.
PSO1: Application of Mechanical Engineering Principles: Graduates will be able to apply the principles of thermal, fluid, material science and manufacturing processes to solve real-world engineering problems.
PSO2: Design and Operating Skills: Graduates will be able to design and operate mechanical systems and analyse their performance using industry-standard tools and techniques.
PEO-1: To impart in-depth knowledge to students in the current technologies in Robotics and Industrial Automation and equip them for research and development.
PEO-2: To develop analytical and problem solving capabilities and improve practical solutions related to modern manufacturing techniques.
PEO-3: To create technical ability in post graduate students by imparting hands-on experience on Robots, Advanced Manufacturing machines associated multidisciplinary fields.
At the end of program, student will able to
PO-1: Apply knowledge of Engineering Specialization for Research, development and design solutions of Engineering problems with consideration in health, safety, cultural, societal and environmental issues.
PO-2: Create, apply appropriate techniques and modern Engineering tools to complex Engineering activities in the field of Automation and Robotics with an understanding of its limitations.
PO-3:- Function effectively and ethically as an individual and as a member or leader in diverse and multidisciplinary teams.
PO-4: Develop proficiency in communication of technical and research work.
PO-5: Recognize the need for and have the preparation and ability to engage in independent and life-long learning in the broadest context of technological change.
- The Department established industry supported lab in association with SVP Mining
Technologies Pvt. Ltd. Raipur (C.G.) Nagpur. - The laboratories and workshops in the department are well-equipped to fulfill the needs of undergraduate and postgraduate education.
- Departmental Faculties have an average experience of 11 Years and the average age of 37 Years & 10 faculty members have more than 20 years of service in the department.
- 16 PhD, 3 Faculty member submitted PhD thesis and 18 Faculty members are
pursuing a PhD - Interaction with Senior Faculty from Internationally and Nationally Reputed Institutions
- The active student chapter of SAE (Society of Automobile Engineers) and ISHRAE (Indian Society of Heating, refrigerating, and Air Conditioning Engineers) and ASME (American Society of Mechanical Engineers).
- The student society of the department, MATRIX is actively involved in organizing various co curricular and extracurricular activities.
- The department is approved as a Research Centre for Ph.D by RTMNU.
- The department demonstrates exceptional collaborative strength by establishing 34
Memoranda of Understanding (MOU), fostering robust partnerships that enhance
academic, research, and professional development opportunities. - The department exhibits a strong innovation culture, evidenced by the successful
filing and acquisition of 56 patents, reflecting its commitment to research excellence
and technological advancement. - The department showcases its creative and intellectual excellence through the successful registration of 60 copyrights, highlighting a strong focus on original content development and knowledge dissemination.
A living gift of nature best owed to us…The Universe, a beautiful creation of the Almighty .The flowing river merging into the mighty Ocean, the rising Sun and the sound of chirping birds, the mighty Mountains and the deep sea Corals, Life in one form or the other. Huge jet Planes, high–rise structures, a high powered multi-cylinder Engine or Micro Electro-Mechanical Systems …Creation of human beings specially Mechanical Engineers. I take this opportunity to welcome you to the department of Mechanical Engineering which was established in 1986 and is currently one of the largest departments of Yeshwantrao Chavan College of Engineering. Our graduates work in almost every technology based industry: automotive, electric power, space and aerospace, steel and materials, bio-engineering, chemical and petro-chemical, robotics and manufacturing, pulp and paper, Indian Armed Forces and shipping. Our outstanding faculty is committed towards excellence in teaching and research. We genuinely care about our students and their future. As in automobile and other wheeled vehicles, the differential allows each of driving road wheels to rotate at different speeds, and is capable of transmitting torque and rotation through three shaft by receiving one input and providing two output that is the sum, difference, or average, of the inputs; this information, shall make you experience a differential, transmitting torque in the form of knowledge throughout your thought process. Ideas and thoughts cannot be inherited and neither be taught, they are at the back of our mind and when a catalyst acts, they flow out in the form of words and awaken sensitive creativity.
Programs Offered
| Program | Intake |
| B.Tech. Mechanical Engineering | 120 |
| B.Tech. Honors (Subtractive and Additive Manufacturing) | — |
| B.Tech. Minors (Integrated Manufacturing and Machine Learning) | — |
| Working professional | 30 |
| M. Tech Automation and Robotics | 12 |
| PhD | As per the RTMNU Direction 38 of 2024 |
| Sr. No. | Name of Laboratory | Room No. | Total area (sq m) | Investment in Rs. | No o students per setup (Batch Size) | Name of the Important Equipment | Weekly utilization status ( all the course for which the lab is utilized) | Name of the Lab Incharge | Technical Staff | Designation |
| 1 | Mechatronics | ME 302 | 65.03 | 246622 | 20 | Siemens PLC Trainer Kit, PID Test Rig | 24/40 (even term) | M.S.Tufail | Y. Dhabarde | Tech. Asst. |
| 2 | Engineering Graphics | NSC 106 | 205.5 | 2013923 | 70 | 77 Computers, 1Plotter, Fixed LCD Projector, LCD Screen, AutoCAD software | 32/40(Both term) | A B Amale | A. Gaurkhede | Tech. Asst. |
| 3 | Computer Aided Design | ME-0-01 | 114 | 2195350 | 20 | 40 High Speed Computers, Fixed LCD Projector, LCD Screen, Solid works and Ansys software, etc. | 26/40(even) | Dr R B Chadge | P. Jagnade | Tech. Asst. |
| 4 | Mechanical Measurement | ME 305 | 76 | 819838 | 20 | Ultrasonic thickness gauge, different meters for measurement, Speed, Displacement and temperature measurement kit | 24/40(even term) | P A Hathwalne | Suhas Padwe | Tech. Asst. |
| 5 | Mechanics of Materials | MS 008 | 71.28 | 936720 | 20 | UTM, Impact testing, Torsin testing machine | 24/40(Odd Term) | R V Adakane | Y. Dhabarde | Tech. Asst. |
| 6 | Metallurgy | MS 005 | 75 | 906013.33 | 20 | BH Tester Rockwel, Hardness Tester, Metallurgical Microscope | 24/40 (Odd Term) | Dr. S P Ambade | Kshama Gujar | Tech. Asst. |
| 7 | Fluid Power | MS 009 | 210 | 1586932 | 20 | Pelton/Fransis& Kaplan Turbine Setup | 24/40 (even term) | Dr.V R Khawle | Jyoti Shiv | Tech. Asst. |
| 8 | Dynamics of Machinery | MS 001 | 85 | 507199 | 20 | Vibration setup, Governor setup, Whirling speed setup | 24/40(Odd term) | D Y Shahare | P. Jagnade | Tech. Asst. |
| 9 | Metrology and Quality Control | ME305 | 75 | 702680 | 20 | Surface roughness tester, Optical Profile Projector, Tool Makers Microscope, Granite plate | 24/40 (Odd term) | A S Bonde | Tech. Asst. | |
| 10 | Heat Transfer | MS 004 | 102.11 | 767691 | 20 | Natural Convection setup, Forced Convection setup, thermal conductivity of metal bar | 24/40 (Odd term) | V M Korde | Jyoti Shiv | Tech. Asst. |
| 11 | Thermal Power | MS 004 | 112 | 2931598 | 20 | Multifuel research engine, Reciprocating air compressor, rotary air compressor, VCRS | 24/40 (even term) | N J Giradkar | Kshama Gujar | Tech. Asst. |
| 12 | Automobile | MS 004 | 102.11 | 111899.35 | 20 | Engine Setup, Jeep model for demonstration | 24/40 (Odd term) | N R Sunheriya | Tech. Asst. | |
| 13 | NAFFETIC/ Automation | ME-002 | 113 | 6944729 | 20 | Flexmill, Flexturn, CNC Controller, 3-D Printer, Fanuc ROBOT | 24/40 (Odd term) | Dr. J P Giri | Suhas Padwe | Tech. Asst. |
| 14 | Machine Drawing | ME 307 | 69 | 0 | 20 | Nil | 24/40 (Odd term) | P.N.Shende | – | – |
| 15 | Free and Open Source Software for Education | ME-004 | 22 | 266760 | – | Open source softwares, 10 Computers | – | P.V.Lande | – | – |
| 16 | Earth Moving Equipment | ME-003 | 114 | 4000000 | 20 | Volvo Engine Assembly , Volvo Hydraulic Valve, Turbo Charger | 4hr/week | Dr. S.T. Bagde | – | – |
| 17 | Tool Room | WS 001 A | 120.87 | 1070560.5 | 20 | Automat, Capstan turret lathe, HMT lathe, Slotting machine | 24/40 (Odd term) | Dr. G M Dhote | D D Lakde | Instructor |
| 18 | Foundry Shop | WS 011 | 79.68 | 227425.72 | 20 | Pit Furnace, Grain fineness tester | 24/40 (even termn) | Dr. G M Dhote | D D Lakde | Instructor |
| 19 | Machine Shop | WS 001 | 369.87 | 5096503.19 | 20 | Lathe Machines, EDM, Universal milling, Omniversal drilling machine, MIG | 24/40 (Odd term) | Dr. G M Dhote | V M Vaidya | Instructor |
| 20 | Smithy Shop | WS 012 | 120.87 | 102953 | 20 | Oil fired furnace, earth furnace | 24/40 (Odd term) | Dr. G M Dhote | S G Shinde | Instructor |
| 21 | Fitting Shop | Fitting Shop | 100.75 | 63941.5 | 20 | Drilling machine Bench vice, hammer, files | 24/40 (Odd term) | Dr. G M Dhote | A Wankhade | Instructor |
| 22 | Welding Shop | Welding Shop | 79.68 | 546729 | 20 | TIG, MIG, Electric arc welding | 24/40 (Odd term) | Dr. G M Dhote | R G Dafre | Instructor |
| 23 | Carpentry Shop | WS 010 B | 100.75 | 114492.6 | 20 | Bench vice, hammer, files, wood Turning lathe machine | 24/40 (Odd term) | Dr. G M Dhote | R G Malamkar | Instructor |
- 3D Printer
- Electrical Discharge Machining
- Three-axis milling machine
- Metal Inert Gas welding machine (MIG)
- Universal Testing Machine
- Impact Testing Machine
- Torsion Testing Machine
- Programmable Logic Controller Trainer kit
- Tester Diesel engine with electrical dynamometer test rig
- Wind Tunnel
- Pelton, Francis and Kaplan Turbine
- Cylindrical grinding machine
- HMT Lathe machine
- Capstan Lathe machine
- Automatic Lathe machine
- Oil-fired tilting furnace
- Surface roughness tester
- Centrifugal blower test rig
- CNC Milling Machine & Lathe
- Robot
- Digital Profile Projector
- Vertical Milling Machine
- CNC controllers and PLCs from SIEMENS and FANUC with SCADA software.
- Auto CAD, Solidworks, and ANSYS
| S.N | Description of work | Client |
| 1. | 3D Printing of SCARA Robot | Bits Pilani Hyderabad Campus |
| 2. | Consultancy offered in inspection, testing and preventive maintenance of Machines. | Sushant Packaging Pvt. Ltd. Plot no. 86, lndranil Apartment, Gajanan Nagar, Nagpur, Maharashtra 440015 |
| 3. | Inspection, Testing, Automation and PreventiveMaintenance of Machines. | Minerals and Metal Resources Khadgaon. Office block No. 1,2nd Floor, C wing, Poonam Chambers, Chindwara Road, Nagpur. |
| 4. | Modification and Automation in OscillationMechanism. | Modification and Automation in OscillationMechanism. |
| 5. | Training program on 5S- Kaizen | Training program on 5S- Kaizen |
| 6. | CNC and Lathe Training | Budhwanti Education and Research Foundation, Gurgaon (Hryana), vocational training center, plot no. J9, MIDC, Hingna, Nagpur |
| 7. | Reverse Engineering & CAD modelling | Chandrashekhar Agro Engineering Pvt. Ltd. & Dagoba Engineering Works Pvt. Ltd. |
- Department established industry supported lab in association with SVP Mining Technologies Pvt. Ltd. Raipur (C.G.) Nagpur.
- Grant of Rs. 40 lac is received by AICTE to established Siemens Centre of Excellence for digital manufacturing and robotics.
- 56 patents have been granted and 32 patent have been published.
- Grant of Rs. 8 lac is received under Incubation component of MSME Innovation scheme for Ceilings Fan cleaning device.
- Grant of Rs. 2.80 lac is received from Department of Science and Technology for Technology based Entrepreneurship Development Program (TEDP) through online platform.
- Grant of Rs. 16.47 lac is received by AICTE under Modernize and Remove Obsolescence (MODROB) scheme for Modernization Thermal Power Laboratory.
- Grant of Rs. 16.47 lac is received by AICTE under RPS for Performance evaluation of automated rotary compression pipe bending mechanism.
- Grant of Rs. 15 lac is received by Ministry of Micro Small & Medium Enterprises for Promo 100 Innovation, Rural Industry and Entrepreneurs HIP (ASPIRE).
Area of Consultancy
- Reverse Engineering & CAD Modelling.
- Hydraulic & Pneumatic system design & analysis
- Additive Manufacturing
- Medical Imaging & 3D modelling
- Inspection Testing & Maintenance of Machines
- Structural & Thermal Analysis using ANSYS
- Data Analytics
- Mathematical Modeling & Statistical Interpretation
Major Hardware & Software’s Available.
- CNC Machine Flex-mill & Flex-turnSmall Industrial Jobs involving milling and turning operations can be performed on these machines.
- FANUC LR-Mate 200ic RobotHands-on robot programming sessions can be carried out for Industrial workers through which we can teach them about robot handling and programming.
- Siemens NX-CAM, ROBCAD licensed software’sHands-on CNC programming sessions can be carried out for Industrial workers through which we can teach them about CNC handling and programming using NX-CAM software. Virtual Industrial Robot Programming sessions can also be carried out for Industrial workers through ROBCAD software.
- MakerBot Replicator+ 3D printerThe 3-D Printer has build volume of 29 .5 L X 19.5 W X 16.5 H CM and materials which can be used for printing the 3-D parts are PLA and ABS. Small scaled prototypes or industrial prototypes can be printed through this printer. Design and Testing facilities.
- Workshop Equipment: Facilities are available in workshop to support the fabrication work.
- Solidworks
- ANSYS
- Electrical Discharge Machining
- Exhaust Gas Analyzer
Methods Engineering & Optimization.
- Motion & Time studies- MTM, PMTS
- Cost reduction through Value Analysis/ Engineering and other techniques
CNC Programming
- Part Programming- Manual, CAD to CAM data transfer
- Machining of Brass & Acrylic
- Simulation of component machining
- Training in the area of MATLAB, Simulation, and modelling, and digital manufacturing using FLEXTURN, FLEXMILL, and ROBCAD
- Part Programming- Manual, CAD to CAM data transfer
Robotics Training in
- Installation, Programming
- Vision & Tactile sensing
Reverse Engineering
- Re-engineering of S.S.I., Units with product/process development
- Analysis of process Substitution, Technology Adoption.
- Modification of Layouts, Machinery & Tooling.
- Cost benefit analysis, Make-Buy Decisions.
- Mechanization & Low cost Automation.
- Design of Machine Elements, Machines & SPM with CAD, Tool Design, and Design of dies for S.S.I.
- Thermal Design of Heat Exchanger.
Thermal Engineering
- Power Plant Engineering.
- Automobile Engineering.
- I-C Engines.
- Thermodynamics & Heat transfer.
Achievements by faculty 2025-26
| S.N | Name of Faculty | Achievements | Date | Achievements in | Institute / Organization |
| 1 | Dr. R.G.Bodkhe | Awarded with PhD in Design, development, and Performance Analysis of Solar Powered Fuel Cell System. | 12/07/2025 | PhD | YCCE |
| 2 | Dr. Yogesh Nandurkar | Awarded with PhD in Design, Development and Performance Analysis of Optically Concentrated Multi Junction Solar Cell System Operated Under Various Active and Passive Cooling Conditions | 09/10/2025 | PhD | YCCE |
| 3 | Dr. Yogesh Nandurkar | Published 2 SCIE papers | 17/05/2025, 16/07/2025 | Renewable energy Impact factor 9.1, Applied thermal engineering, Impact factor 6.9 | YCCE |
| 4 | Dr. Manish Dakhore | Awarded with PhD in Performance evaluation of automated rotary compression pipe bending mechanism | 04/11/2025 | PhD | YCCE |
| 5 | Dr. Sachin Ambade | Published SCIE paper | ——- | Journal of Anti-corrosion Methods and Materials, Emerald, SCIE Index, Impact Factor: 2.6, Quartile: Q2 | YCCE |
Achievements by faculty
| S.N | Name of Faculty | Achievements | Date | Achievements in | Institute / Organization |
| 1 | A.S.Bonde | Best paper award | 06-04-2024 to 07-04-2024 | ICTMSME 2024 | Innovative Scientific Research India |
| 2 | Dr. S.R. Jachak | Elite | 01-01-2023 to 30-04-2023 | NBA Accreditation and Teaching and Learning in Engineering (NPTEL) | Indian Institute of Sciences Bangalore |
| 3 | N. J. Giradkar | Topper in the course (NPTEL) | 01-07-2023 to 30-09-2023 | Refrigeration and Air conditioning | Swayam, IIT Roorkee |
| 4 | D. Y. Shahare | Best Paper Award | 02-02-2023 to 04-02-2023 | RAMMML 2023, International Conference | YCCE, Nagpur |
| 5 | C. A Mahatme | Elite Silver Medal | 01-01-2023 to 28-02-2023 | NPTEL-Effective Writing | IIT, Roorkee |
| 6 | A. P. Edlabadkar | First Best Poster | 02-02-2023 to 04-02-2023 | RAMMML 2023, International Conference | YCCE, Nagpur |
| 7 | N.J. Giradkar | Best Paper Award | 26-04-2023 to 27-04-2023 | RAMMML 2022, International Conference | YCCE, Nagpur |
| 8 | V.M.Korde | Best Paper Award | 26-04-2023 to 27-04-2023 | RAMMML 2022, International Conference | YCCE, Nagpur |
| 9 | R.G. Bodkhe | Best Paper Award | 02-02-2023 to 04-02-2023 | RAMMML 2023, International Conference | YCCE, Nagpur |
| 10 | Dr. S. P. Kamble | Best Paper Award | 26-04-2023 to 27-04-2023 | RAMMML 2022, International Conference | YCCE, Nagpur |
| 11 | M.M.Dakhore | Best Paper Award | 06-05-2023 | ICFMET International Conference | Shri. Yeshwantrao Patil Science College Solankur |
| 12 | N.D.Gedam | First Best Poster Award | 26-04-2023 to 27-04-2023 | RAMMML 2022, International Conference | YCCE, Nagpur |
| 13 | Neeraj Sunheriya | Best Paper Award | 26-04-2023 to 27-04-2023 | RAMMML 2022, International Conference | YCCE, Nagpur |
| 14 | Pratik Lande | Best Paper Award | 26-04-2023 to 27-04-2023 | RAMMML 2022, International Conference | YCCE, Nagpur |
| 15 | Dr. R. B. Chadge | Best Paper Award | 26-04-2023 to 27-04-2023 | RAMMML 2022, International Conference | YCCE, Nagpur |
| 16 | Dr. G.M. Dhote | Third Best Poster Award | 02-02-2023 to 04-02-2023 | RAMMML 2023, International Conference | YCCE, Nagpur |
NPTEL Courses Done by Faculty(2025-26)
| Name of Teacher who attended the programme | Title of the programme | Duration (from – to) (DD-MM-YYYY) |
| Prof. A. B. Amale | Principles of Metal Forming Technology | 01-07-2025 to 30-09-2025 |
| Prof. A. B. Amale | Fundamentals of Manufacturing Processes | 01-07-2025 to 31-10-2025 |
| Prof. D. I. Sangotra | Fundamentals of Manufacturing Processes | 01-07-2025 to 31-10-2025 |
| Prof. V.G.Thakre | Fundamentals of Manufacturing Processes | 01-07-2025 to 31-10-2025 |
NPTEL Courses Done by Faculty(2024-25)
| Sr. No. | Name of Teacher who attended the programme | Title of the programme | Duration (from – to) (DD-MM-YYYY) |
| 1 | Prof A B.Amle | Introduction to professional scientific communication | Jan- Feb 2025 |
| 2 | Prof A B.Amle | Roadmap for patent creation | Jan-March 2025 |
NPTEL Courses Done by Faculty(2023-24)
| Sr. No. | Name of Teacher who attended the programme | Title of the programme | Duration (from – to) (DD-MM-YYYY) |
| 1 | Prof.R.V Adkane | Manufacturing Process Technology I & II | 23-01-2023 to 14-04-2024 |
| 2 | Prof.N.D Gedam | APPLIED THERMODUNAMIC | 01-07-2023 to 31-10-2023 |
| 3 | Prof.N.J.Giradkar | Refrigeration and Air Conditioning | 01-07-2023 to 30-09-2023 |
| 4 | Prof.A.R. Narkhede | Manufacturing Process Technology I and II | 01-01-2023 to 30-04-2023 |
| 5 | Prof.P.S.Barve | Patent drafting beginner | 01-07-2023 to 31-08-2023 |
NPTEL Courses Done by Faculty(2022-23)
| Sr. No | Name of Faculty | Title of Program | Duration |
| 1 | Prof. P. A. Hatwalne | Computer Integrated Manufacturing | 12 Weeks |
| 2 | Prof.S.R. JACHAK | NBA Accreditation and teaching and learning in Engineering (NATE) | JAN-APRIL 2023 |
| 3 | Prof.M.S.Tufail | Automation in Production Systems and Management, | 12 week |
| 4 | Prof.M.S.Tufail | Effective Writing | JAN TO FEB 2023 |
| 5 | Prof.S.T.Bagde | NBA Accreditation and teaching and learning in Engineering (NATE) | JAN-APRIL 2023 |
| 6 | Prof.P.S.BARVE | Introduction to machining and machining fluids | 8 WEEKS |
| 7 | Prof.A.B. AMALE | Engg. Drawing and Computer Graphics | Jul-Oct 2022 |
| 8 | Prof.A.B. AMALE | NBA Accreditation and teaching and learning in Engineering (NATE) | JAN-APRIL 2023 |
| 9 | Prof.D.N.Kashyap | NBA Accreditation and teaching and learning in Engineering (NATE) | JAN-APRIL 2023 |
| 10 | Prof.C.A.Mahatme | Effective Writing | JAN TO FEB 2023 |
Faculty Interaction with outside world (2025-26)
| Sr. no | Faculty | Type of Interaction | Name of Event | Place | Date |
| 1 | Dr. Sharad Chaudhari | PhD Research advisory board member | Seminar | GH Raisoni Institute of Engineering and Technology, Nagpur | 05-01-2026 |
| 2 | Dr. Sharad Chaudhari | BoS Members Vice-Chancellor’s Nominee | BOS meeting | St Vincent Pallotti College of Engineering and Technology , Nagpur | 07/02/2026 |
| 3 | Dr. Sharad Chaudhari | BoS Members Vice-Chancellor’s Nominee | BOS meeting | Tulsiramji Gaikwad-Patil College of Engineering , Nagpur | 17/11/2025 |
| 4 | Dr. Sharad Chaudhari | Academic council | Academic meeting | GH Raisoni college of Engineering , Nagpur | 03/01/2026 |
| 5 | Prof. G. M. Dhote | Workshop | ASME Engineering Education Seminar & Maharashtra Section Annual Meeting | IIT Bomay | 09-08-2025 |
| 6 | Prof. G. M. Dhote | FDF | IMECE India 2025 | American Society of Mechanical Engineers | 12-09-2025 |
| 7 | Prof. P. N. Shende | STTP | Advannced Sustainable Materials(Ensuring a Sustainable andf Equitable Future) | Department of Applied Chemistry, YCCE, Nagpur | 29-12-2025 |
Faculty Interaction with outside world (2023-24)
| Sr. no | Faculty | Type of Interaction | Name of Event | Place | Date |
| 1 | Dr. S. R. Jachak | Expert lecture at industry | Concept of Projections. Methods of projections. Reading of front view, side view and top view of drawing. Interpretation of views in customer drawings. | TASL Nagpur | 24.1.2024 |
| 2 | Dr. S. G. Mahakalkar | Expert lecture at industry | Understanding of Bill of Material.GD & T symbols and usage Geometric Dimensioning and Tolerance (GD&T) | TASL Nagpur | 27.1.2024 |
| 3 | Prof. A. S. Bonde | Expert lecture at industry | Basics of various metrological instruments and Usage of Vernier callipers, Micrometers, Filler gauges, Height gauge and Profile Projector. | TASL Nagpur | 10.2.2024 |
| 4 | Dr. A.P.Kedar | Expert lecture at industry | 7 basic Quality tools (Pareto chart, Scatter diagram, Histogram, Control Chart, Fishbone diagram, Check sheet, Stratification) | TASL Nagpur | 31.1.2024 |
| 5 | Dr. S.S.Chaudhari | Expert lecture at industry | Basics of Calibration and its requirement for measuring instruments. Identify malfunctioning of instruments due to damage during inspection. | TASL Nagpur | 21.2.2024 |
| 6 | Dr P D Kamble | Expert lecture at industry | Basics of Calibration std . ISO/IEC 17025. Temperature and Humidity requirements of Calibration room | TASL Nagpur | 28.2.2024 |
| 7 | Prof. R. V. Adakane | Expert lecture at industry | Basics of Conductivity, Magnetic Particle Inspection, Fluorescent Particle Inspection, A-scan and C-scan | TASL Nagpur | 6.3.2024 |
| 8 | Prof . G. M. Dhote | Expert lecture at industry | NDT report preparation NDT Audits readiness (NADCAP) | TASL Nagpur | 13.3.2024 |
Faculty Interaction with outside world (2022-23)
| Sr. no | Faculty | Type of Interaction | Name of Event | Place | Date |
| 1. | Dr. SachinAmbade | Key Note Speaker | Emerging Trends in Engineering, Science & Management | GovindraoWanjari College of Engineering & Technology(Polytechnic) | 06-02-2023 |
| 2. | Dr. J.P. Giri | Expert Reviewer | Robotics and Automation Letters | IEEE | May 1, 2023 |
| 3. | Dr. SachinAmbade | Expert Member-BOS meeting | Board of studies Meeting in Faculty of Engineering & Technology | JD College of Engineering & management | 15-12-2022 |
| 4. | Prof. M. S. Tufail | Consultancy Services | CNC Lathe Machine Training Centre | Budhwanti Education and Research Foundation, Gurugram(Haryana) | 09-02-2023 |
| 5. | Dr. Sharad Chaudhari | Expert Lecture | Workshop on “CNC and Lathe Machine Training Centre” | Budhwanti Education and Research Foundation, Gurugram(Haryana) | 13-01-2023 |
| 6. | Prof. Ajinkya Edlabadkar | Chief Guest | मराठीभाषासंवर्धनपंधरवडा | ShrimatiBinzaniMahila Mahavidyalaya | 02-02-2023 |
| 7. | Dr. R. B. Chadge | Question Paper Setter | Appointment as a Question Paper setter | St. Vincent Pallotti College of Engineering & Technology | 19-01-2023 |
| 8. | Prof. M. S. Tufail | Question Paper Setter | Appointment as a Question Paper setter | St. Vincent Pallotti College of Engineering & Technology | 19-01-2023 |
| 9. | R. V. Adakane | Consultancy Services | CNC Lathe Machine Training Centre | Budhwanti Education and Research Foundation, Gurugram(Haryana) | 19-01-2023 |
| 10. | Prof. Ajinkya Edlabadkar | Chief Guest | Science, Math Fair | Tilak Vidyalaya Madhyamik School | 21-01-2023 |
| 11. | Prof. Ajinkya Edlabadkar | Chief Guest | मराठीभाषासंवर्धनपंधरवडा | ShrimatiBinzaniMahila Mahavidyalaya | 25-01-2023 |
| 12. | Dr. S.S.Chaudhari, Dr. S.S. Khedkar,Prof. N.J. Giradkar | Subject Expert | RTMNU | RTMNU Nagpur | 02-07-2022 |
| 13. | Dr. S.S.Chaudhari | Subject Expert | Interview process of Assistant Professor | G. H Raisoni College of Engineeing, Nagpur | 01-08-2022 |
| 14. | Dr. R. B. Chadge | Question Paper Setter | Appointment as a Question Paper setter | St. Vincent Pallotti College of Engineering & Technology | 05-09-2022 |
| 15. | Dr. S. S. Chaudhari | Expert Talk | Guidance in Institute Improvement | Datta Meghe Institute of Management Studies | 03-09-2022 |
| 16. | Dr. S. S. Chaudhari | Expert Talk | Guidance on OBE | Datta MegheInstitute of Medical ScienceS,SawangiMeghe, Wardha | 18-11-2022 |
| 17. | Mr. Ashwin Amale | Guest Lecture | Lecture on Orthographic and Isometric Projection in Engineering Graphics using Auto-CAD | G.H RaisoniChhindwara, Madhya Pradesh | 23-09-2022 |
| 18. | Dr. R. B. Chadge | Answer book Evaluator | Appointment as a Answer book Evaluator | St. Vincent Pallotti College of Engineering & Technology | 01-10-2022 |
| 19. | Dr. SachinBagde | Expert Lecture | Invitation for Delivering Expert Lecture on ‘Documentation and Filing’ As Required for NAAC & NBA | Anjuman college of Engineering and Technology, Nagpur | 30-12-2022 |
| 20. | Prof. Prasad Hatwalne | Expert Talk | Guidance on OBE | Datta MegheInstitute of Medical ScienceS,SawangiMeghe, Wardha | 18-11-2022 |
| 21. | Prof. Prasad Hatwalne | Question Paper Setter | Appointment as a Question Paper Setter | Tulsiram Gaikwad-Patil College of Engineering, Nagpur | 19-11-2022 |
| 22. | Prof. V. M. Korde | Guest Lecture | Training program on Fluid Power Circuit | G. M. Enterprises, Abhyankar Nagar, Nagpur | 05-12-2022 |
| 23. | Dr. SachinBagde | Expert Lecture | One day NAAC Sponsored seminar | Vidyasagar Teachers Training College, Midnapore | 3-3-2023 |
| Session | Value added courses/WS/SDP/STTP/FDP | Guest lecture |
S.N | Name of Event | Event date from | to | Expert |
1 | VAC on “Advances in thermal enginnering” | 27-08-2025 | 08-11-2025 | Prof. V.M.Korde Prof. N.J.Giradkar Dr. Y.Y.Nandurakar Dr. S. Sunheria Dr. V.R.Khawle |
2 | VAC on “Introduction to solidworks” | 11-10-2025 | 28-11-2025 | Prof. P.A.Hathwalne |
3 | VAC on “Ansys APDL” | 11-10-2025 | 22-11-2025-2025 | Dr. P.D.Kamble, Dr. S.P.Kamble |
4 | VAC on ” Introduction to MATLAB software with hand -on experience with MATLAB on-line” | 16-08-2025 | 16-10-2025 | Prof. D.Y.Sahare, Prof. A.R.Narkhede |
5 | VAC on ” Blender” | 01-09-2025 | 14-11-2025 | Prof. P.V. Lande, Dr.N.Sunheria |
6 | VAC on ” Scilab” | 01-09-2025 | 14-11-2025 | Prof. P.V. Lande, Dr.N.Sunheria |
7 | VAC on ” Qcad” | 01-09-2025 | 14-11-2025 | Prof. P.V. Lande, Dr.N.Sunheria |
| SN | Workshop / Seminar on – | Event date from | to | Expert |
| 1 | VAC on “Design of Experiments” | 08-02-2025 | 26-04-2025 | Dr. P.D. Kamble |
| Dr. S.R. Jachak | ||||
| Dr. S.P. Kamble | ||||
| 2 | VAC on “FEA Analysis” | 15-03-2025 | 15-04-2025 | Prof. D.Y. Sahare, Prof. A.R. Narkehede |
| 3 | VAC on “Industrial Safety” | 05-04-2025 | 04-05-2025 | Prof. D.I. Sangotra |
| 4 | How to crack CAT | 23-07-2024 | 23-07-2024 | Abhishek Soni, Academic Head- CAT (Nagpur), Maulana Azad National Institute of Technology Bhopal. |
| 5 | Advance Approaches for Conquering the CAT Examination | 16-08-2024 | 16-08-2024 | Yash Mandpe IIT Roorkee |
| 6 | Students psychology for GATE exam and other competitive exam | 16-10-2024 | 16-10-2024 | Shishir Persai Made easy Pvt. Ltd |
| 7 | Project training and design drafting | 22-10-2024 | 22-10-2024 | Zeeshan KG Mech Technology |
| 8 | Opportunities for Students in Research and Development in the USA | 13-01-2025 | 13-01-2025 | Piyush Thakre, Application Technology Expert / Scientist at Dow , USA |
| 9 | Track to Future Railway Engineering for Mechanical Engineers | 21-02-2025 | 21-02-2025 | Gunjankumar Wasnik, Deputy chief , mechanical engineer , Indian Railway , Nagpur |
| 10 | Importance of Higher Study and Research for Future Prospective | 27-02-2025 | 27-02-2025 | Dr. Devendra Deshmukh, Assistant professor , IIT Indore |
| 11 | Research Funding Proposal | 03-03-2025 | 03-03-2025 | Dr. Pravin Patil, Director Accreditation and Compliance at NMIMS University Mumbai |
| 12 | Application of Catia Software and Its Benefits | 03-12-2025 | 03-12-2025 | Anil Jain, Virtual simulation and G to G innovation , Pune |
| 13 | Prospective for Higher Studies and Opportunities in Germany | 21-03-2025 | 21-03-2025 | Dheeraj Dey, Masters of science , Atomotive engineering , Current in managerial at ZF Group , Germany |
| 14 | Engineering of Leadership: Technicalities in CAT & Life through IIM | 13-04-2025 | 13-04-2025 | Amogh Sahastrabudhe, Product Manager at Cloudnine Group of Hospitals. , ( IIM Lucknow 2022-2024). |
| 15 | Project training and design drafting | 16-04-2024 | 16-04-2024 | Zeeshan , KG Mech Technology |
| 16 | Guidance on Aptitude Test, CRT, CAT & Different Government Exam | 17-04-2025 | 17-04-2025 | Subham Wakade, iQuanta Institute , Nagpur , IIM Nagpur |
| 17 | Importance of Higher study and benefits of study in Germany | 21-03-2025 | 21-03-2025 | Mr. Anand Sharma, Intern in R&D Packaging- Europe @Henkel | Industrial Engineering, Pfalzel,Rhineland-Palatinate, Germany |
| 18 | Application Matlab and hands on metlab software , and introduction to students | 23-04-2025 | 23-04-2025 | : Mr. Rohit Pawar, Jr. Application Enginer , MathWorks |
| 19 | STTP on bridging the gap between theoretical and physical world in mechanical engineering domain | 07-05-2025 | 12-05-2025 | Prof. Ajinkya Edlabadkar, Dipti Kashyap,Dr. S.S.Chaudhari |
| 20 | PRATIKRUTI 2025 | 25-02-2025 | 25-02-2025 | Dr. S.S.Chaudhari, Prof. Ajinkya Edlabadkar |
VAC and Exam Preparation Sessions
| S.No. | Name of Event | Event date from | to | Expert |
| 1. | VAC on “Design of Experiments” | 08-02-2025 | 26-04-2025 | Dr. P.D. Kamble Dr. S.R. Jachak Dr. S.P. Kamble |
| 2. | VAC on “FEA Analysis” | 15-03-2025 | 15-04-2025 | Prof. D.Y. Sahare, Prof. A.R. Narkehede |
| 3. | VAC on “Industrial Safety” | 05-04-2025 | 04-05-2025 | Prof. D.I. Sangotra |
| 4. | How to crack CAT | 23-07-2024 | 23-07-2024 | Abhishek Soni |
| 5. | Advance Approaches for Conquering the CAT Examination | 16-08-2024 | 16-08-2024 | Yash Mandpe |
| 6. | Students psychology for GATE exam and other competitive exam | 16-10-2024 | 16-10-2024 | Shishir Persai |
| 7. | Project training and design drafting | 22-10-2024 | 22-10-2024 | Zeeshan |
| 8. | Opportunities for Students in Research and Development in the USA | 13-01-2025 | 13-01-2025 | Piyush Thakre |
| 9. | Track to Future Railway Engineering for Mechanical Engineers | 21-02-2025 | 21-02-2025 | Gunjankumar Wasnik |
| 10. | Importance of Higher Study and Research for Future Prospective | 27-02-2025 | 27-02-2025 | Dr. Devendra Deshmukh |
| 11. | Research Funding Proposal | 03-03-2025 | 03-03-2025 | Dr. Pravin Patil |
| 12. | Application of Catia Software and Its Benefits | 03-12-2025 | 03-12-2025 | Anil Jain |
| 13. | Prospective for Higher Studies and Opportunities in Germany | 21-03-2025 | 21-03-2025 | Dheeraj Dey |
| 14. | Engineering of Leadership: Technicalities in CAT & Life through IIM | 13-04-2025 | 13-04-2025 | Amogh Sahastrabudhe |
| 15. | Project training and design drafting | 16-04-2024 | 16-04-2024 | Zeeshan |
| 16. | Guidance on Aptitude Test, CRT, CAT & Different Government Exam | 17-04-2025 | 17-04-2025 | Subham Wakade |
Value added courses /WS/SDP/STTP/FDP Session: 2023-2024
| S.No. | Name of Event | Event date from | to | Expert |
| 1. | VAC on “Electric and hybrid vehicle ” | 16 -03-2024 | 27-04-2024 | Dr. V.R.Khawale |
| 2. | VAC on “Basics of computational tools” | 16-09-2023 | 22-10-2023 | Prof. D.Y.Sahare, Prof. A.R.Narkehede |
| 3. | VAC on “Basics of computational tools” | 16-02-2024 | 20-03-2024 | Prof. D.Y.Sahare, Prof. A.R.Narkehede |
| 4. | VAC on “Computer aided modelling by solidworks” | 16-02-2024 | 06-04-2024 | Dr. P.D.Kamble, Prof. P.H.Hathwalne |
| 5. | VAC on ” Industrial trends in manufacturing systems” | 16 -03-2024 | 13-04- 2024 | Dr.G.M.Dhote, Prof. A.S.Bonde |
| 6. | Importance of research paper and research work in future | 04-10-2023 | 04-10-2023 | Dr.S P Ambade, Prof. V M Korde |
| 7. | Industrial Robotics & Automation and It’s Future Opportunities | 04-10-2023 | 04-10-2023 | Dr.S P Ambade, Prof. V M Korde |
| 8. | Career Opportunities and Career guidance | 08-11-2023 | 08-11-2023 | Dr.S P Ambade, Prof. V M Korde |
| 9. | Mechanical Engineering Career Paths | 20-12-2023 | 20-12-2023 | Dr.S P Ambade, Prof. V M Korde |
| 10. | UPSC and MPSC career guidance | 20-02-2024 | 20-02-2024 | Dr.S P Ambade, Prof. V M Korde |
| 11. | CAT, IPMAT , CLAT , SSE Exam preparation | 13-03-2024 | 13-03-2024 | Dr.S P Ambade, Prof. V M Korde |
| 12. | How to Crack GATE/ESE exams in First Attempt | 14-03-2024 | 14-03-2024 | Dr.S P Ambade, Prof. V M Korde |
| 13. | How to conquer GATE Examination | 16-05-2024 | 16-05-2024 | Dr.S P Ambade, Prof. V M Korde |
| 14 | STTP on Intracacies of Industrial IoT and Agile Manufacturing | 18-03-2024 | 23-03-2024 | Prof. Dipti Kashyap |
| S.No. | Name of Event | Event date from | to | Expert |
| 1 | CATIA V5 by virtual Simutech Pvt Ltd Pune | 17-01-2023 | 03-02-2023 | Mr. Anil Jain , Virtual cematic PVT.LTD |
| 2 | Computer Aided Modelling by Solid Works | 10-09-2022 | 10-12-2022 | Dr.P.D.Kamble, Prof. P.Shirpurkar, Prof.P.Hathwalne |
| 3 | Application of CAE using ANSYS | 07-10-2022 | 12-11-2022 | Prof. D.Y.Shahare |
| 4 | How to excel at CEED (Common Entrance Examination for Design) | 17/10/2022 | 17/10/2022 | Vaibhav Watile , M.DES at IDC , IIT Bombay |
| 5 | Importance of Advanced Study in the Future | 11-02-2022 | 11-02-2022 | DeepshriAwale, Ph.D. II Metallurgical & Materials Engineering II VNIT-Nagpur II |
| 6 | How to prepare for GRE | 11-09-2022 | 11-09-2022 | AbhiramDapke,Master in Robotics, Boston |
| 7 | How to prepare for CAT | 11-09-2022 | 11-09-2022 | Alisha Das,seniorassociat consultant , Infosys |
| 8 | WITNESS Horizon demo & ATC discussion | 21/01/2023 | 21/01/2023 | Venkatesh Fulbandhe and Mohit Despande,WITNESS Simulation Modeling Software |
| 9 | Industrial Robotics & Automation and It’s Future Opportunities | 23/01/2023 | 23/01/2023 | Anil Tatode,Training Officer , RTMNU |
| 10 | Job opportunities in steel industry sector and Think beyond mechanical engineering | 31/01/2023 | 31/01/2023 | Vasim Habib Khan, AGM project Management , SISCOL |
| SN | Workshop / Seminar on – | Organized by | Dates | Professional bodies | No of Participants |
| 1 | VAC on “Design of Experiments” | YCCE | 08-02-2025 to 29-03-2025 | ASME | 24 |
| 2 | VAC on “CAE Using ANSYS” | YCCE | 07-02-2025 to 27-03-2025 | SAE | 46 |
| 3 | VAC on “Industrial Safety” | YCCE | 05-04-2025 to 04-05-2025 | ASME | 25 |
| 4 | How to crack CAT | YCCE | 23-07-2024 | ISHRAE | 61 |
| 5 | Advance Approaches for Conquering the CAT Examination | YCCE | 16-08-2024 | ISHRAE | 30 |
| 6 | Students phycology for GATE exam and other competetive exam | YCCE | 16-10-2024 | ISHRAE | 60 |
| 7 | Project training and design drafting | YCCE | 22-10-2024 | ISHRAE | 61 |
| 8 | Opportunities for Students in Research and Development in the USA | YCCE | 13-01-2025 | ISHRAE | 61 |
| 9 | Track to future Railway engineering for mechanical engineers | YCCE | 21-02-2025 | ISHRAE | 77 |
| 10 | Importance of higher study and research for future prospective | YCCE | 27-02-2025 | ISHRAE | 72 |
| 11 | Research Funding proposal | YCCE | 03-03-2025 | ISHRAE | 36 |
| 12 | Application of Catia Software and its benefits | YCCE | 03-12-2025 | ISHRAE | 61 |
| 13 | Prospective for higher studies and opportunities in Germany | YCCE | 21-03-2025 | ISHRAE | 42 |
| 14 | Engineering of Leadership: Technicalities in CAT & Life through IIM | YCCE | 13-04-2025 | ISHRAE | 42 |
| 15 | Project training and design drafting | YCCE | 16-04-2024 | ISHRAE | 52 |
| 16 | Guidance on Aptitude test, CRT, CAT & different government exam | YCCE | 17-04-2025 | ISHRAE | 49 |
| 17 | Importance of Higher study and benefits of study in Germany | YCCE | 21-03-2025 | ISHRAE | 80 |
| 18 | Application Matlab and hands on metlab software , and introduction to students | YCCE | 23-04-2025 | ISHRAE | 55 |
| 19 | STTP on bridging the gap between theoretical and physical world in mechanical engineering domain | YCCE | 07-05-2025 to 12-05-2025 | ASME | 120 |
| 20 | PRATIKRUTI 2025 | YCCE | 25-02-2025 | SAE | 480 |
| Guest lecture Session 2025-26 | ||||||
| S.N | Name of Event | Event date from | to | Expert | No. of Students | Faculty coordinator |
| 1 | Resilience Engineering: Bouncing Back from CAT Failures to IIM Success | 29/07/2025 | 29/07/2025 | Amogh Sahastrabudhe | 50 | Prof. N.D.Gedam |
| 2 | AI & Leadership: How Future Leaders Can Leverage Technology | 29/07/2025 | 29/07/2025 | Amogh Sahastrabudhe | 50 | Prof. N.D.Gedam |
| 3 | The Impact of biulding information modeling on Mechanical Engineerers Innovation | 18/9/2025 | 18/09/2025 | Sahil Gedam | 60 | Prof. N.D.Gedam |
| 4 | Jobs v/s higher studies v/s business: the carrer dilemma | 26/09/2025 | 26/09/2025 | Nidhika Bagde | 96 | Prof. N.D.Gedam |
| 5 | Your Career, Your Choice: Evaluating Job Offers, Academic Programs | 26/09/2025 | 26/09/2025 | Samyak Janbandhu | 96 | Prof. N.D.Gedam |
| 6 | Study in abroad orientation program | 15/10/2025 | 15/10/2025 | Nisha Ingale | 50 | Prof. N.D.Gedam |
Skill Development and Higher Education Events
| Name of Event | Event date from | to | Expert | No. of Students | Faculty coordinator |
| How to crack CAT | 23-07-2024 | 23-07-2024 | Abhishek Soni | 50 | Prof. N.D.Gedam |
| Advance Approaches for Conquering the CAT Examination | 16-08-2024 | 16-08-2024 | Yash Mandpe | 40 | Prof. N.D.Gedam |
| Students psychology for GATE exam and other competitive exam | 16-10-2024 | 16-10-2024 | Shishir Persai | 60 | Prof. N.D.Gedam |
| Project training and design drafting | 22-10-2024 | 22-10-2024 | Zeeshan | 60 | Prof. N.D.Gedam |
| Opportunities for Students in Research and Development in the USA | 13-01-2025 | 13-01-2025 | Piyush Thakre | 67 | Prof. N.D.Gedam |
| Track to Future Railway Engineering for Mechanical Engineers | 21-02-2025 | 21-02-2025 | Gunjankumar Wasnik | 60 | Prof. N.D.Gedam |
| Importance of Higher Study and Research for Future Prospective | 27-02-2025 | 27-02-2025 | Dr. Devendra Deshmukh | 60 | Prof. N.D.Gedam |
| Research Funding Proposal | 03-03-2025 | 03-03-2025 | Dr. Pravin Patil | 38 | Prof. N.D.Gedam |
| Application of Catia Software and its Benefits | 03-12-2025 | 03-12-2025 | Anil Jain | 80 | Prof. N.D.Gedam |
| Prospective for Higher Studies and Opportunities in Germany | 21-03-2025 | 21-03-2025 | Dheeraj Dey | 80 | Prof. N.D.Gedam |
| Engineering of Leadership: Technicalities in CAT & Life through IIM | 13-04-2025 | 13-04-2025 | Amogh Sahastrabudhe | 50 | Prof. N.D.Gedam |
| Project Training and Design Drafting | 16-04-2024 | 16-04-2024 | Zeeshan | 60 | Prof. N.D.Gedam |
| Guidance on Aptitude Test, CRT, CAT & Different Government Exam | 17-04-2025 | 17-04-2025 | Subham Wakade | 60 | Prof. N.D.Gedam |
| Name of Event | Event date from | to | Expert | No. of Students | Faculty coordinator |
| Career Opportunities and Career guidance | 08-11-2023 | 08-11-2023 | Deeepankar Bani | 40 | Prof. N.D.Gedam |
| Transform your life GATE success | 10-04-2023 | 10-04-2023 | Saurabh Mandaokar | 80 | Prof. N.D.Gedam |
| Mechanical Engineering Career Paths | 20/12/2023 | 20/12/2023 | Mr. Nilesh Agashe | 60 | Prof. N.D.Gedam |
| UPSC and MPSC career guidance | 20/02/2024 | 20/02/2024 | Sharman Wasnik | 60 | Prof. N.D.Gedam |
| CAT, IPMAT , CLAT , SSE Exam preparation | 13/03/2024 | 13/03/2024 | Shubham Rathod | 60 | Prof. N.D.Gedam |
| How to Crack GATE/ESE exams in First Attempt | 14/03/2024 | 14/03/2024 | V R D M Kaisik Agastyaraj | 70 | Prof. N.D.Gedam |
| How to conquer GATE Examination | 16/05/24 | 16/05/24 | Pratik Dewangan | 60 | Prof. N.D.Gedam |
| S.N | Name of Event | Event date from | to | Expert | No. of Students | Faculty coordinator |
| 1 | Awareness on Recruitment in NDA | 13-10-2022 | 13-10-2022 | Ishan Kinkhede | 160 | Prof. R.G.Bodkhe |
| 2 | Supply Chain Management | 21-09-2022 | 21-09-2022 | Dr. R.S. Chandana | 100 | Prof. R.G.Bodkhe |
| 3 | Career Counselling personality Development and importance of english language | 08-12-2022 | 08-12-2022 | Ritu Onkar | 155 | Prof. R.G.Bodkhe |
| 4 | Waste to Energy | 29-09-2022 | 29-09-2022 | Dr.Samir Kolte | 160 | Prof. R.G.Bodkhe |
| 5 | Opportunities for “faculties and students immersion program | 22-12-2022 | 22-12-2022 | Gagan Agrawal | 165 | Prof. R.G.Bodkhe |
| 6 | Industry 4.0 Applications in Foundries | 13-12-2022 | 13-12-2022 | Chandrashekhar Mankar | 175 | Prof. R.G.Bodkhe |
| 7 | Internship and placement opportunities at Germany | 10-02-2023 | 10-02-2023 | Dheeraj Dey, Aditya Jiwane | 175 | Prof. R.G.Bodkhe |
| Sr. No. | Name of Innovative Practices |
| 1 | Well-equipped laboratories with Siemens Centre of excellence |
| 2 | Frequent conduction of Value-Added Courses with Industrialsoftware exposure |
| 3 | Training onPython, C++, Scilabetc. through IIT, Bombay |
| 4 | Conduction of Honor course in Subtractive and AdditiveManufacturing, Advanced Industrial Roboticsand minor course in IntegratedManufacturing AndMachine Learning |
| 5 | Regular industrial visits |
| 6 | Use of Innovative teaching learning methods like KWL Chart, Experiment Based Learning, Research Paper Based Case Study, Project Based Learning, Flipped Classroom, Simulation, Group Assignment, etc. |
| 7 | Regular SDP,FDP,Seminars by external members like IIT professors,Industrialists,Alumni etc. |
| 8 | Regular eventsunder departmental GATE Club, SAE Club, ASME Club. |
| 9 | Semester Long Internship program for all final year Students |
| 10 | Series of International Conferences organized by Department RAMMML-2022 and RAMMML-2023 |
| Session | Publication | Copyright | Patent | Grants | |||
| Journal | Conference and book chapter | Book | |||||
| 2025-26 | 35 | 18 | 108 | 8 | 15 | 173.49 Lakhs (Submitted) | |
| 2024-25 | 72 | 7 | 1 | 2 | 21 | 23.42 Lakhs (Sanctioned) | |
| 2023-24 | 121 | 18 | 2 | 10 | 17 | Rs 34.092 lakhs (Submitted) | |
| 2022-23 | 15 | 48 | 3 | 9 | 7 | Rs 41.44 lakhs (Submitted) | |
| Sr. No. | Name of the Author(s) | Title of the Paper | Name of the Journal | Publisher | DOI | Index |
| 1. | Prof. Y.Y.Nandurkar | Enhancing Performance of Concentrator Photovoltaic/Thermal Systems by Using Various Passive Cooling Methods: A Review | Journal of The Institution of Engineers (India): Series C, | Springer | https://doi.org/10.1007/s40032-025-01191-y | SCOPUS |
| 2. | Dr. J.P. Giri | A hybrid machine learning framework for predicting moisture-induced pavement failure: integrating sensitivity analysis and data augmentation | ROAD MATERIALS AND PAVEMENT DESIGN | TAYLOR & FRANCIS | DOI10.1080/14680629.2025.2520554 | SCIE |
| 3. | Dr. J.P. Giri | Catalytic pyrolysis of plastic waste for hydrogen and carbon nanoparticle production: A pathway to sustainable biofuels and circular economy | Energy Conversion and Management: X Volume 27, July 2025, 101048, Elsevier | ELSEVIER | https://doi.org/10.1016/j.ecmx.2025.101048 | SCIE |
| 4. | Dr. J.P. Giri | Mechanical properties and residual stresses in multi pass AISI 304 to AISI 1018 steel welds by SMAW and GTAW | Scientific Reports volume 15, Article number: 27052 (2025) , Nature | NATURE PORTFOLIO | https://doi.org/10.1038/s41598-025-06063-0 | SCIE |
| 5. | Dr. J.P. Giri | An efficient battery management system for electric vehicles using IoT & Blockchain | Results in Engineering | Springer | https://doi.org/10.1016/j.rineng.2025.106284 | SCOPUS |
| 6. | Dr. J.P. Giri | A comprehensive review on non-conventional machining of Nickel-Titanium alloys: Techniques and surface integrity | Results in Engineering | Springer | https://doi.org/10.1016/j.rineng.2025.106231 | SCOPUS |
| 7. | Dr. J.P. Giri | Multifunctional polythiophene-based composites for environmental remediation and energy storage: A critical review | Materials Today Sustainability | ELSEVIER | https://doi.org/10.1016/j.mtsust.2025.101183 | SCOPUS |
| 8. | Dr. J.P. Giri | Thermal performance and flow control in cross-flow heat exchangers using inclined splitter plate | International Journal of Thermofluids | ELSEVIER | 10.1016/j.ijft.2025.101351 | SCOPUS |
| 9. | Dr. J.P. Giri | Performance Enhancement of Evacuated Tube Solar Collectors Using Fe3O4 Nanoparticle-Enhanced Phase Change Materials for Efficient Thermal Energy Storage | Engineering Reports | WILEY | DOI: 10.1002/eng2.70230 | SCOPUS |
| 10. | Dr. N.P. Mungle | Bi-level optimization of composite floor systems integrating fire resistance and vibration serviceability using multi-method computational intelligence process | Asian Journal of Civil Engineering, | Springer | https://doi.org/10.1007/s42107-025-01434-4 | SCOPUS |
| 11. | Dr. S.B. Sahare | Mechanical, water absorption, and flammability behaviour of coconut shell and jackfruit skin powder-reinforced bio-composites fabricated | International Journal of Materials Research, | De Gruyter | https://doi.org/10.1088/2053-1591/acb19f. | SCOPUS |
| 12. | Prof. G H Waghmare | Characterization of dragon fruit biocarbon and Moringa oleifera pod husk microfiber toughened PVA composite thin sheet: Load bearing, dielectric and EMI shielding properties | Journal of Cellular Plastics | SAGE PUBLICATIONS LTD | https://doi.org/10.1177/0021955X251357243 | SCIE |
| 13. | Prof. M.S. Tufail | Statistical and machine learning models for predicting the compressive strength of fly ash-based geopolymer mortar | Asian Journal of Civil EngineeringOpen source preview, 2025, 26(10), pp. 4251–4268 | Springer | DOI: 10.1007/s42107-025-01423-7 | SCOPUS |
| 14. | Prof. Y.Y.Nandurkar | Optimizing multi-junction solar cell efficiency: Seasonal performance comparison of cooling strategies | Applied Thermal Engineering Volume 279, Part B, 15 November 2025, 127368 | PERGAMON-ELSEVIER | https://doi.org/10.1016/j.applthermaleng.2025.127368 | SCIE |
| 15. | Dr. J.P. Giri | Addressing uncertainty in pavement performance prediction: a quasi-Monte Carlo simulation-based reliability approach | ROAD MATERIALS AND PAVEMENT DESIGN | TAYLOR & FRANCIS | DOI10.1080/14680629.2025.2527202 | SCIE |
| 16. | Dr. J.P. Giri | Impact of Drying Temperature on the Physicochemical and Functional Properties of Butterfly Pea Flower Powder | BioResources | NORTH CAROLINA STATE UNIV DEPT WOOD & PAPER SCI | DOI10.15376/biores.20.3.7232-7249 | SCIE |
| 17. | Dr. J.P. Giri | Real-Time Monitoring in Polymer Composites: Internet of Things Integration for Enhanced Performance and Sustainability – A Review | BioResources | 10.15376/biores.20.3.Karuppusamy | SCOPUS | |
| 18. | Dr. J.P. Giri | Potential Waste-to-Wealth Strategy for Combining Medical Surgical Gloves-Derived Pyrolysis Oil with Pentanol and Nanoparticles: Experimental Analysis on Engine Behaviors | Global ChallengesVolume 9, Issue 8 | WILEY | 10.1002/gch2.202500031 | SCIE |
| 19. | Dr. J.P. Giri | Measurement and analysis of transient heat flux on a conical surface using platinum thin film gauges | International Journal of Thermofluids | ELSEVIER | DOI: 10.1016/j.ijft.2025.101370 | SCOPUS |
| 20. | Dr. J.P. Giri | Real-Time Monitoring in Polymer Composites: Internet of Things Integration for Enhanced Performance and Sustainability — A Review | BioResources 20(3), 8093-8118 | 10.15376/biores.20.3.Karuppusamy | SCOPUS | |
| 21. | Dr. S.S. Chaudhari | Experimental and numerical investigation of heat transfer enhancement using perforated fins in electric motor | International Communications in Heat and Mass Transfer, Publisher Pergamon, Elsever | PERGAMON-ELSEVIER | https://doi.org/10.1016/j.icheatmasstransfer.2025.109115 | SCIE |
| 22. | Dr. S.S. Chaudhari | Investigation of convective heat transfer from non perforated and perforated rectangular and pin fins for effective cooling of electric motors: A numerical approach | International Journal of Thermofluids | ELSEVIER | https://doi.org/10.1016/j.ijft.2025.101381 | SCOPUS |
| 23. | Dr. J.P. Giri | Investigation of the mechanical properties of pineapple leaf fibre-reinforced biocomposites | SCIENTIFIC REPORTS, Volume15Issue1 | NATURE PORTFOLIO | DOI10.1038/s41598-025-12044-0 | SCIE |
| 24. | Dr. S.S. Chaudhari | Experimental and numerical investigation of heat transfer enhancement using perforated fins in electric motor | INTERNATIONAL COMMUNICATIONS IN HEAT AND MASS TRANSFER Volume166 | PERGAMON-ELSEVIER SCIENCE LTD | DOI10.1016/j.icheatmasstransfer.2025.109115 | SCIE |
| 25. | Dr. J.P. Giri | Green synthesis of silver/zinc oxide plasmonic nanocomposites using Moringa oleifera: A dual-function strategy for photocatalysis and dye-sensitized solar cell performance | Journal of Science: Advanced Materials and Devices | VIETNAM NATL UNIV | DOI10.1016/j.jsamd.2025.100954 | SCIE |
| 26. | Dr. J.P. Giri | Effects of metal-oxide nanoparticles and biodiesel mixtures on combustion, performance, emissions, vibration, and noise parameters in a Variable Compression Ratio (VCR) diesel engine | Case Studies in Thermal Engineering | ELSEVIER | https://doi.org/10.1016/j.csite.2025.106692 | SCIE |
| 27. | Dr. J.P. Giri | Enhancing surface quality and strength of QH21 magnesium alloy via friction stir processing with TiO2-ZnO coatings: a Taguchi optimization approach | WELDING IN THE WORLD | SPRINGER | DOI:10.1007/s40194-025-02177-1 | SCIE |
| 28. | Dr. J.P. Giri | Enhancing solar thermal desalination with MWCNT/TiO2 nanofluids for sustainable water solutions | Case Studies in Thermal Engineering | ELSEVIER | https://doi.org/10.1016/j.csite.2025.106797 | SCIE |
| 29. | Dr. J.P. Giri | Performance enhancement of heat pipe-based solar tube collectors using graphene nanofluids: Experimental analysis and thermal optimization | Case Studies in Thermal Engineering | ELSEVIER | 10.1016/j.csite.2025.106460 | SCIE |
| 30. | Dr. J.P. Giri | Enhancing compression ignition engine efficiency and reducing noise emissions: The impact of nanoparticle enhanced biodiesel blends | Ain Shams Engineering Journal Volume 16, Issue 10, October 2025, 103507 | ELSEVIER | DOI10.1016/j.asej.2025.103507 | SCIE |
| 31. | Dr. J.P. Giri | Performance and emission characteristics of waste cooking oil biodiesel blends in sustainable fuel applications | SCIENTIFIC REPORTS | NATURE PORTFOLIO | DOI10.1038/s41598-025-19130-3 | SCIE |
| 32. | Dr. J.P. Giri | Real-time prediction of soil bearing capacity in clayey soils using drilling parameters and statistical modeling | SCIENTIFIC REPORTS, Volume15Issue1 | NATURE PORTFOLIO | DOI10.1038/s41598-025-19767-0 | SCIE |
| 33. | Dr. G.M. Dhote | Intelligent carbon nanomaterial electrodes for rapid heavy metal detection in complex water matrices | Microchemical JournalOpen source preview, 2025, 218, 115225 | ELSEVIER | DOI: 10.1016/j.microc.2025.115225 | SCOPUS |
| 34. | Dr. J.P. Giri | Molecular insights into shale gas adsorption: Thermodynamics, pore architecture, and CO₂ utilization in next-generation energy systems | Results in Engineering, Volume 28, , 107370 | Elsevier | DOI: 10.1016/j.rineng.2025.107370 | SCOPUS |
| 35. | Dr. J.P. Giri | Sustainable synthesis of marine-derived hydroxyapatite for biomedical applications: a systematic review on extraction methods and bioactivity | ADVANCED MANUFACTURING-POLYMER & COMPOSITES SCIENCE
| TAYLOR & FRANCIS | DOI10.1080/20550340.2025.2508547 | ESCI |
| Sr. No. | Name of the Author(s) | Title of the Paper | Name of the Journal | DOI | Index |
| 1. | Dr. J.P. Giri | Waste to fuel: A detailed combustion, performance, and emission characteristics of a CI engine fuelled with sustainable fish waste management augmentation with alcohols and … | Energy | https://doi.org/10.1016/j.energy.2024.131412 | SCIE |
| 2. | Dr. J.P. Giri | Free vibration analysis of composite aircraft wing | Interactions | https://link.springer.com/article/10.1007/s10751-024-01976-0 | SCOPUS |
| 3. | Dr. J.P. Giri | Navigating the novel nanoparticles: current insights, innovations, and future vistas in detection and treatment of cervical cancer | Nanocomposites | https://doi.org/10.1080/20550324.2024.2362504 | SCIE |
| 4. | Dr. J.P. Giri | Experimental analysis and development of fuzzy model for the prediction of COP and mass flow rate in air-conditioning system | Interactions | https://link.springer.com/article/10.1007/s10751-024-01979-x | SCOPUS |
| 5. | Dr. J.P. Giri | Sustainable green cutting fluid for interpreting optimization of process variables while machining on various CNC manufacturing systems—an experimental approach for exploring | The International Journal of Advanced Manufacturing Technology | https://link.springer.com/article/10.1007/s00170-024-14028-2 | SCIE |
| 6. | Dr. J.P. Giri | Mechanical and tribo-performance analysis of LD sludge filled wood apple dust-epoxy composites using response surface methodology | Interactions | https://link.springer.com/article/10.1007/s10751-024-01978-y | SCOPUS |
| 7. | Dr. J.P. Giri | Polystyrene nanoplastics synergistically exacerbate diclofenac toxicity in embryonic development and the health of adult zebrafish | Comparative Biochemistry and Physiology Part C: Toxicology & Pharmacology | https://doi.org/10.1016/j.cbpc.2024.109926 | SCIE |
| 8. | Dr. J.P. Giri | Performance of jack fruit methyl ester and pine oil blends with coconut shell nanoadditive biodiesel for automobile applications | Interactions | https://link.springer.com/article/10.1007/s10751-024-02004-x | SCOPUS |
| 9. | Dr. J.P. Giri | Experimental analysis and development of fuzzy model for the prediction of COP and mass flow rate in air-conditioning system | Interactions | https://link.springer.com/article/10.1007/s10751-024-01979-x | SCOPUS |
| 10. | Dr. J.P. Giri | Comparative investigation of mechanical properties in banana fiber and ramie fiber composites enhanced by SiC nanoparticles | AIP Advances 14, 075023 (2024) | https://doi.org/10.1063/5.0207560 | SCIE |
| 11. | Dr. J.P. Giri | Surface modification of basalt fibers and its effect on the mechanical properties of basalt fiber/epoxy composite laminates | AIP Advances 14, 075119 (2024) | https://doi.org/10.1063/5.0209664 | SCIE |
| 12. | Dr. J.P. Giri | Comparative analysis of saturated–unsaturated shear strength under undrained loading: Experimental validation and ANN prediction of clayey soils | AIP Advances 14, 075118 (2024) | https://doi.org/10.1063/5.0206783 | SCIE |
| 13. | Dr. J.P. Giri | Enhancing mechanical performance of MWCNT filler with jute/kenaf/glass composite: a statistical optimization study using RSM and ANN | Materials Technology | https://doi.org/10.1080/10667857.2024.2381156 | SCIE |
| 14. | Dr. J.P. Giri | Predictive modelling and optimization of WEDM parameter for Mg-Li alloy using ANN integrated CRITIC-WASPAS approach | Heliyon | https://doi.org/10.1016/j.heliyon.2024.e35194 | SCIE |
| 15. | Dr. Sachin P. Ambade | Critical review on weldability of 316 austenitic and 410 martensitic stainless steel | Recent Advances in Material, Manufacturing, and Machine Learning, CRC Press, Taylor and Francis | https://doi.org/10.1201/9781003450252 | SCOPUS |
| 16. | Prof. G.H. Waghmare | Revolutionizing Healthcare: A Review of Applications of Additive Manufacturing in Dentistry | First International Conference on Advances in Multi-Material Manufacturing, Karunya Nagar, Coimbatore. 3-4 April 2024 | ||
| 17. | Dr. J.P. Giri | Automatic machine learning model for enhanced partition and identification of breast disorders in breast MRI scan | Computer Methods in Biomechanics and Biomedical Engineering: Imaging & Visualization, Taylor and Francis | https://doi.org/10.1080/21681163.2024.2378734 | SCOPUS, ESCI |
| 18. | Dr. Neeraj Sunheriya | Evaluation of a helical coil heat exchanger in a forced convection environment | Interactions | https://link.springer.com/article/10.1007/s10751-024-02043-4 | SCOPUS |
| 19. | Dr. J.P. Giri | Application of ANFIS approach for prediction of performance measures in wire electric discharge machining of SAE 1010 Conference Proceeding | Interactions | https://link.springer.com/article/10.1007/s10751-024-02030-9 | SCOPUS |
| 20. | Dr. J.P. Giri | Biodiesel Production from Food Industrial Waste of Soybean Oil using a Lipase-nanoparticle Bio-composite Catalyst | Automotive Experiences | https://doi.org/10.31603/ae.10707 | SCOPUS |
| 21. | Dr. J.P. Giri | Influence of hybrid nanofiller on elastic behavior and stiffness of basalt/E-glass MWCNTs/SiO2 hybrid nanocomposites | AIP Advances 14, 085313 (2024) | https://doi.org/10.1063/5.0215621 | SCIE |
| 22. | Dr. J.P. Giri | Physico-chemical characterization of cupola slag: Enhancing its utility in construction | AIP Advances 14, 085011 (2024) | https://doi.org/10.1063/5.0219629 | SCIE |
| 23. | Dr. J.P. Giri | Performance assessment of hybrid machine learning approaches for breast cancer and recurrence prediction | PloS one | https://doi.org/10.1371/journal.pone.0304768 | SCOPUS |
| 24. | Dr. J.P. Giri | Exploring the strength and durability of hemp fiber reinforced moringa bioresin composites for skateboard applications | AIP Advances 14, 085119 (2024) | https://doi.org/10.1063/5.0220726 | SCIE |
| 25. | Dr. J.P. Giri | GastroNet: A CNN based system for detection of abnormalities in gastrointestinal tract from wireless capsule endoscopy images | AIP Advances 14, 085223 (2024) | https://doi.org/10.1063/5.0208691 | SCIE |
| 26. | Dr. J.P. Giri | Nano-fuels of Al2O3/SiO2/MgO/tamarind seed oil biodiesel for CI engines: An evaluation of combustion consumption and emission performance | International Journal of Thermofluids, Elsevier Volume 23 , August 2024, 100815 | https://doi.org/10.1016/j.ijft.2024.100815 | SCIE |
| 27. | Prof A.S. Bonde | Design and Application of Value Stream Mapping in a Small-Scale Forging Industry | International Conference on Trends in Material Science and Manufacturing Engineering (ICTMSME 2024) April 6-7, 2024 | ||
| 28. | Dr. Vijay R. Khawale | Mechanical characterization of extruded sisal-polypropylene composites with optimized compounding parameters | Interactions, Springer | https://doi.org/10.1007/s10751-024-02016-7 | SCOPUS |
| 29. | Dr. Girish M. Dhote | AI‑enhanced predictive maintenance in hybrid roll‑to‑roll manufacturing integrating multi‑sensor data and self‑supervised learning | The International Journal of Advanced Manufacturing Technology, Springer | https://doi.org/10.1007/s00170-024-14263-7 | SCIE |
| 30. | Dr. J.P. Giri | Development of Free Fatty Acid (FFA) monitoring device for evaluation of oil samples used for biodiesel production | Heliyon, Elsevier | https://doi.org/10.1016/j.heliyon.2024.e37118 | SCIE |
| 31. | Dr. J.P. Giri | Investigation on materials removal rate and surface roughness of temperature resisted Waspaloy during electric spark machining utilizing gray relational analysis | AIP Advances 14, 085133 (2024) | https://doi.org/10.1063/5.0220951 | SCIE |
| 32. | Dr. Girish M. Dhote | “Optimizing Dry Sliding Abrasive Wear Behavior in Coir Fiber Reinforced PVAComposites: AGreyBased Taguchi Method Approach ” | Sixth International Conference on Materials Science and Manufacturing Technology 2024 (ICMSMT 2024) held at Akshaya College of Engineering and Technology, Coimbatore, Tamil Nadu, India during 03 – 04, May 2024 | ||
| 33. | Dr. Shilpa Sahare | Multi objective optimization of cutting parameters of endmilling operation by Taguchi Grey | Interactions (2024) 245:273, Spinger | https://doi.org/10.1007/s10751-024-02119-1 | SCOPUS |
| 34. | Dr. Shilpa Sahare | Performance analysis of Jute/Kenaf fiber polyester hybridcomposites for non-structural applications | Interactions (2024) 245:164 | https://doi.org/10.1007/s10751-024-02009-6 | SCOPUS |
| 35. | Dr. Shilpa Sahare | Comparative Analysis of Winding of Multiple Yarns onAutomated Winding Machine | International Conference on “Advances in Mechanical Engineering” 2023, Journal of Physics: Conference Series 2763 (2024) 012021 | doi:10.1088/1742-6596/2763/1/012021 | SCOPUS |
| 36. | Dr. J.P. Giri | Carbonization and Gasification of Cow-Dung and Fe3O4 Nanoparticles at Different Operating Conditions for Hydrogen Production | Chemistry Select | https://doi.org/10.1002/slct.202402515 | SCOPUS |
| 37. | Dr. J.P. Giri | Optimization of nano-filler and silane treatment on mechanical performance of nanographene hybrid composites using RSM and ANN technique | Journal of Adhesion Science and Technology, Taylor & Francis | https://doi.org/10.1080/01694243.2024.2403680 | SCIE |
| 38. | Dr. J.P. Giri | Hydrogen conversion by microalgae through water gasification under different operating conditions, and Fe2O3, Al2O3, and CaO additives: An experimental study | International Journal of Hydrogen Energy, Elsesvier | https://doi.org/10.1016/j.ijhydene.2024.09.003 | SCIE |
| 39. | Dr. J.P. Giri | Opportunities and challenges of bamboo fiber composites in additive manufacturing: A comprehensive review | AIP Advances 14, 090702 (2024) | https://doi.org/10.1063/5.0227267 | SCIE |
| 40. | Dr. J.P. Giri | An experimental study of the impact of various infill parameters on the compressive strength of 3D printed PETG/CF | AIP Advances 14, 095208 (2024) | https://doi.org/10.1063/5.0212544 | SCIE |
| 41. | Dr. J.P. Giri | Optimizing process parameters to minimize wear-induced material loss in bronze-based hybrid metal matrix composites using the Taguchi method | AIP Advances 14, 095104 (2024) | https://doi.org/10.1063/5.0203081 | SCIE |
| 42. | Dr. J.P. Giri | Enhancing Tribological Properties of Pump Shafts through Shot Peening: A Study of Surface Roughness, Hardness and Performance Comparison with Heat Treatment | Material Research Express, IOP | DOI 10.1088/2053-1591/ad7d6f | SCIE |
| 43. | Dr. J.P. Giri | Bridgeless modified Cuk–SEPIC power factor correction converter for E-bicycle applications | AIP Advances 14, 095026 (2024) | https://doi.org/10.1063/5.0229333 | SCIE |
| 44. | Dr. J.P. Giri | Predictive Analysis for Removing Obstacles in Electric Mobility: Revolution into EV Adoption | Transportation Engineering, Elsevier | https://doi.org/10.1016/j.treng.2024.100277 | SCIE |
| 45. | Dr. J.P. Giri | Arsenic and cadmium ions remediation from aqueous solution using plant-derived iron NPs | Environmental Pollutants and Bioavailability, Volume 36, 2024 – Issue 1, Taylor and Francis | https://www.tandfonline.com/doi/full/10.1080/26395940.2024.2407377#abstract | SCIE |
| 46. | Dr. J.P. Giri | Optimization of process parameters to minimize circularity error and surface roughness in fused deposition modelling (FDM) using Taguchi method for biomedical implant fabrication | Advanced Manufacturing: Polymer & Composites Science, Taylor and Francis | https://doi.org/10.1080/20550340.2024.2406156 | ESCI, Scopus |
| 47. | Dr. N.P. Mungle | Applications of computational intelligence for predictive modeling of properties of blended cement sustainable concrete incorporating various industrial byproducts towards sustainable construction | Asian Journal of Civil Engineering, Springer | https://doi.org/10.1007/s42107-024-01155-0 | SCOPUS |
| 48. | Dr. N.P. Mungle | Predictive modeling for concrete properties under variable curing conditions using advanced machine learning approaches | Asian Journal of Civil Engineering, Springer | https://doi.org/10.1007/s42107-024-01174-x | SCOPUS |
| 49. | Dr. J.P. Giri | Dynamic clustering based risk aware congestion control technique for vehicular network | Scientific Reports volume 14, Article number: 24774 (2024), Nature Publishing Group | https://doi.org/10.1038/s41598-024-75648-y | SCOPUS |
| 50. | Dr. J.P. Giri | Analyzing Steady-State Equilibria and Bifurcations in a Time-Delayed SIR Epidemic Model Featuring Crowley-Martin Incidence and Holling Type II Treatment Rates | Heliyon, Elsevier | DOI: 10.1016/j.heliyon.2024.e39520 | SCIE |
| 51. | Dr. J.P. Giri | Effect of Fuel Injection Parameters on the Performance & Emissions of Biodiesel Based CI Engine-A Review | Results in Engineering, Elsevier | https://doi.org/10.1016/j.rineng.2024.103180 | SCIE |
| 52. | Dr. J.P. Giri | Tribological, Mechanical and microstructure characteristics of hybrid aluminium matrix composite containing titanium carbide (TiC) and graphite particles | Journal of Materials Research and Technology, Elsevier | https://doi.org/10.1016/j.jmrt.2024.10.167 | SCIE |
| 53. | Dr. J.P. Giri | Optimized thermal pretreatment for lignocellulosic biomass of pigeon pea stalks to augment quality and quantity of biogas production | International Journal of Thermofluids Volume 24, November 2024, 100911, Elsevier | https://doi.org/10.1016/j.ijft.2024.100911 | SCIE |
| 54. | Dr. J.P. Giri | Influence of Prosopis juliflora bark powder/fillers on the mechanical, thermal and damping properties of jute fabric hybrid composites | Journal of Materials Research and Technology Volume 33, November–December 2024, Pages 3452-3461 | https://doi.org/10.1016/j.jmrt.2024.10.066 | SCIE |
| 55. | Dr. J.P. Giri | Impact of different parameters in tribological properties of enset ventricosum/ terminalia arjuna fibers /SiO2 filler incorporation | Journal of Materials Research and Technology, Volume 33, November–December 2024, Pages 3826-3836 | https://doi.org/10.1016/j.jmrt.2024.09.250 | SCIE |
| 56. | Dr. J.P. Giri | Impacts of novel calotropis gigantea seed biodiesel usage as a fuel substitute along with various metal-oxide nanoparticles on the DICI engine characteristic | Case Studies in Thermal Engineering Volume 63, November 2024, 105249, Elsevier | https://doi.org/10.1016/j.csite.2024.105249 | SCIE |
| 57. | Dr. J.P. Giri | Investigating the performance and durability of high mechanical milling nano pulverised refused SCMs | Case Studies in Construction Materials Volume 21, December 2024, e03818, Elsevier | https://doi.org/10.1016/j.cscm.2024.e03818 | SCIE |
| 58. | Dr. J.P. Giri | A wavelet CNN with appropriate feed-allocation and PSO optimized activations for diabetic retinopathy grading | Journal for Control, Measurement, Electronics, Computing and Communications Volume 65, 2024 – Issue 4, Automatika, Taylor and Francis | https://doi.org/10.1080/00051144.2024.2409552 | SCIE |
| 59. | Prof. G.H. Waghmare | Materials Evolution in Dental Implantology: A Comprehensive Review | Journal of Advanced Research in Applied Mechanics 123, Issue 1 (2024) 75-100 | DOI: https://doi.org/10.37934/aram.123.1.75100 | SCOPUS |
| 60. | Dr. J.P. Giri | Numerical prediction and experimental verification of dynamic deflection responses of damaged hybrid (luffa and carbon-nanotube-reinforced) polymeric composite panel structure | International Journal of Applied Mechanics, World Scientific Publishing Company | https://doi.org/10.1142/S1758825124501230 | SCOPUS |
| 61. | Dr. J.P. Giri | Correction to: Automatic liver segmentation using U-Net deep learning architecture for additive manufacturing | Interaction, Volume 245, article number 326, (2024) | https://doi.org/10.1007/s10751-024-01927-9 | SCOPUS |
| 62. | Dr. J.P. Giri | Mechanical assessment for enhancing hybrid composite performance through silane treatment using RSM and ANN | Results in Engineering, Elsevier | https://doi.org/10.1016/j.rineng.2024.103309 | SCOPUS |
| 63. | Dr. J.P. Giri | Impact of collector aspect ratio on the energy and exergy efficiency of a louvered fin solar air heater | Case Studies in Thermal Engineering Volume 63, November 2024, 105312, Elsevier | https://doi.org/10.1016/j.csite.2024.105312 | SCIE |
| 64. | Dr. J.P. Giri | Solar energy prediction with synergistic adversarial energy forecasting system (Solar-SAFS): Harnessing advanced hybrid techniques | Case Studies in Thermal Engineering Volume 63, November 2024, 105197, Elsevier | https://doi.org/10.1016/j.csite.2024.105197 | SCIE |
| 65. | Dr. J.P. Giri | Optimization of docetaxel-loaded cholesterol nanostructured lipid carriers for improving cancer treatment using Taguchi experimental design | Results in Engineering, Elsevier | https://doi.org/10.1016/j.rineng.2024.103263 | SCOPUS |
| 66. | Prof. Nilesh Gedam | Investigation of Heat Transfer Enhancement Techniques in Microchannel Heat Sinks | Nanotechnology Perceptions, Vol.20, No.6 (2024 | https://doi.org/10.62441/nano-ntp.vi.3273 | SCOPUS |
| 67. | Prof. Nilesh Gedam | Technical Review of a Variable Height Speed Breaker System with Speed Detection for Two-Wheelers on a One-Way Road | International Conference on Robotics, Automation and Intelligent Computing (ICRAIC 2K24), 18-19 May 2024, AIP Conf. Proc. 3255, 050003 (2025) | https://doi.org/10.1063/5.0254135 | SCOPUS |
| 68. | Prof. Nilesh Gedam | Overview of a Vertical Axis Wind Turbine using multiple generators with single rotor | International Conference on Robotics, Automation and Intelligent Computing (ICRAIC 2K24), 18-19 May 2024, AIP Conf. Proc. 3255, 040006 (2025) | https://doi.org/10.1063/5.0254133 | SCOPUS |
| 69. | Prof. Nilesh Gedam | Development of Semi-Automated Sand Refining Machine with Analysis of Various Sieving Mesh Patterns | 13th International Conference On Recent Challenges In Engineering And Technology, at Chennai, India, 27 – 28 September 2024 | ||
| 70. | Dr. J.P. Giri | Biofuel conversion through heterogeneous solid catalysts and carbon nanotubes by biological waste material with sheep fat oil | International Journal of Hydrogen Energy Volume 96, 27 December 2024, Pages 692-702 | https://doi.org/10.1016/j.ijhydene.2024.11.313 | SCIE |
| 71. | Dr. J.P. Giri | Eco-friendly synthesis of ZnO nanoparticles fabricated using Fioria vitifolia L. and their Biomedical Potentials | Microbial Pathogenesis, Elsevier | https://doi.org/10.1016/j.micpath.2024.107139 | SCIE |
| 72. | Dr. J.P. Giri | An extensive analysis of GTAW process and its influence on the microstructure and mechanical properties of SDSS 2507 | Journal of Materials Research and Technology Volume 33, November–December 2024, Pages 8675-8686 | https://doi.org/10.1016/j.jmrt.2024.11.157 | SCIE |
| 73. | Dr. J.P. Giri | Hydrogen cultivation through an integrated ranking cycle and proton exchange membrane with an evacuated tube collector powered by hybrid nanofluids | Energy, Elsevier | https://doi.org/10.1016/j.energy.2024.133941 | SCIE |
| 74. | Prof. Alok Narkhede | DESIGN AND DEVELOPMENT OF AUTOMATIC RICE TRANSPLANTER MACHINE | 2nd IEEE DMIHER International Conference on “Artificial Intelligence in Healthcare, Education & Industry” (IDICAIHEI 2024), 29-30 N0v 2024 | ||
| 75. | Dr. Girish M. Dhote | Blockchain-Enabled Information Systems for Secure Health Management: A Case Study on Patient Data Privacy | Journal of Information Systems Engineering and Management 2025, 10(1) e-ISSN: 2468-4376 | https://doi.org/10.52783/jisem.v10i1.3 | SCOPUS |
| 76. | Dr. Girish M. Dhote | Nature Inspires Biomimetic Robots to Build Lattice Structures of Unprecedented Strength | International Journal of Advance Manufacturing Technology-Springer (SCI) | https://doi.org/10.1007/s00170-024-14870-4 | SCIE |
| 77. | Dr. J.P. Giri | Arsenic and cadmium ions remediation from aqueous solution using plant-derived iron NPs | Environmental Pollutants and Bioavailability, Taylor & Francis | https://doi.org/10.1080/26395940.2024.2407377 | SCIE |
| 78. | Dr. J.P. Giri | Optimization of process parameters to minimize circularity error and surface roughness in fused deposition modelling (FDM) using Taguchi method for biomedical implant fabrication | Advanced Manufacturing: Polymer & Composites Science, Taylor & Francis | https://doi.org/10.1080/20550340.2024.2406156 | SCIE |
| 79. | Dr. J.P. Giri | A Review on Bio-inspired Corrosion Resistant Superhydrophobic Coating on Copper Substrate: Recent Advances, Mechanisms, Constraints, and Future Prospects Author links open overlay panel | Results in Engineering Available online 31 December 2024 | https://doi.org/10.1016/j.rineng.2024.103868 | SCOPUS |
| 80. | Prof. Nilesh Gedam | AI-DrivenSolutions for Intelligent Design and Fabrication of Aerospace Components in Aeronautic | Nanotechnology Perceptions ISSN 1660-6795 | Indexing not done SCOPUS |
| Sr. No. | Name of the Author(s) | Title of the Paper | Name of the Journal | Publisher | DOI | Index |
| 1. | Manikandan Natarajan; Thejasree P; Jayant Giri; Neeraj Sunheriya; Lakshmi Narasimhamu Katta; Rajkumar Chadge; Chetan Mahatme | Machinability of Titanium Grade 5 Alloy for Wire Electrical Discharge Machining Using a Hybrid Learning Algorithm | Information, MDPI | MDPI | 10.3390/info14080439 | SCIE
|
| 2. | Nikam, M.; Al-Lohedan, H.A.; Mohammad, F.; Khetree, S.; Patil, V.; Lonare, G.; Khan, F.J.; Jagatap, G.; Oza, A.D.; Manoj Kumar, J.P. Giri, Rajkumar B. Chadge and Ahmed A. Soleiman | Optimization of Machining Parameters for Enhanced Performance of Glass-Fibre-Reinforced Plastic (GFRP) Composites Using Design of Experiments | Sustainability 2023, 15, 12372, MDPI | MDPI | https://doi.org/10.3390/su151612372 | SCIE |
| 3. | Faisal Rahmani, Emad Makki, Jayant Giri | Influence of Bearing Wear on the Stability and Model characteristics of a Flexible Rotor supported on Powder Lubricated journal Bearing. | Lubricants 2023, 11(9), 355, Lubricants, MDPI | MDPI | https://doi.org/10.3390/lubricants11090355 | SCIE |
| 4. | Bhojraj N. Kale, S. D. Patle, S. R. Kalambe, Vijay R. Khawale | Comparative analysis of compression ignition engines performance and emission characteristics devouring edible and nonedible oil biodiesel | Journal ofEnvironment Progress and Sustainable Energy, Wiley Publication | Wiley Publication | https://doi.org/10.1002/ep.14363 | SCIE |
| 5. | P.M. Gopal a,**, K. Soorya Prakash b , Emad Makki c , V. Kavimani a , Jayant Giri d, T. Sathish | E-waste CRT panel glass reinforced magnesium composite processed through powder metallurgy fabrication and mechanical performance evaluation | Journal of Materials Research and Technology, Elsevier | Elsevier | https://doi.org/10.1016/j.jmrt.2023.10.178 | SCIE |
| 6. | Sachin Ambade, Chetan Tembhurkar, Akshay Rokde, Santosh Gupta, Sagar Shelare, Chander Prakash LPU, Lovi Raj Gupta, Vladimir A Smirnov | Experimental investigation of microstructural, mechanical and corrosion properties of 316L and 202 austenitic stainless steel joints using cold metal transfer welding | Journal of Materials Research and Technology Elsevier Volume 27, November–December 2023, Pages 5881-5888 | Elsevier | https://doi.org/10.1016/j.jmrt.2023.11.091 | SCIE |
| 7. | Ashish Kaushik, Pardeep Kumar, Sumit Gahletia, Ramesh Kumar Garg, Ashish Kumar, Mohit Yadav, Jayant Giri, Deepak Chhabra | Optimization of Dual Extrusion Fused Filament Fabrication Process Parameters for 3D Printed Nylon-Reinforced Composites: Pathway to Mobile and Transportation Revolution | SAE International Journal of Materials and Manufacturing 17(2023) | SAE International | https://doi.org/10.4271/05-17-01-0001 | SCOPUS |
| 8. | Dhayalan, M., Parveen, S., Thirumalaisamy, S., Mohammad, F., Al-Lohedan, H. A., Riyaz, S. U. M., Dinesh, R. A., Giri, J., Stalin, A., Reddy, G. R., Anandakumar, N., and Mallik, S. | Evaluating the Therapeutic Importance of Gold Nanoparticles Formed by the Biogenic Synthesis Route of Madhuca longifolia Reduction | BIORESOURCES (NC STATE UNIVERSITY journal) | NC STATE UNIVERSITY Journal | DOI: 10.15376/biores.19.1.823-841 | SCIE |
| 9. | Hussain Pipwala , Ragesh Kapadia , Hitesh Panchal , Bharat Singh , Prateek D. Malwe ,Abhinav Kumar , Emad Makki, , Jayant Giri | Performance Investigation of a Direct-Cooled Refrigerator with CuO-R600a as a Nanorefrigeran | Journal : Case Studies in Chemical and Environmental Engineering ELSEVIER | ELSEVIER | https://doi.org/10.1016/j.cscee.2023.100569 | SCOPUS |
| 10. | Satish Kumar Thandalam a,*, Titus Thankachan b , Emad Makki c , Jayant Giri ,Sathish Thanikodi e | Insitu synthesis of Al– MgAl2O4 composites and parametric optimization of tribological characteristics | HELIYON ELSEVIER | ELSEVIER | https://doi.org/10.1016/j.heliyon.2024.e25427 | SCIE |
| 11. | B. R. N. Murthy ,Emad Makki ,Srinivasa Rao Potti 3,Anupama Hiremath 1,,Gururaj Bolar ,Jayant Giri 4 andT. Sathish 5 | Optimization of process parameters to minimize the surface roughness of abrasive water jet machined jute/epoxy composites for different fiber inclinations | Journal of Composites Science, J. Compos. Sci. 2023, 7(12), 498; MDPI | MDPI | https://doi.org/10.3390/jcs7120498 | SCIE |
| 12. | C George, SS Selvan, VS Kumar, G Murali, J Giri, E Makki, T Sathish | Enhancing the fire-resistant performance of concrete-filled steel tube columns with steel fiber-reinforced concrete | Case Studies in Construction Materials 20, e02741 | ELSEVIER | https://doi.org/10.1016/j.cscm.2023.e02741 | SCIE |
| 13. | Chetan tembhurkar, Sachin Ambade*, Ravinder Kataria, Jagesvar Verma, Abhijeet Moon | Cold Metal Transfer Welding of 316L / 430 dissimilar stainless-steel welds | Journal title: Anti-Corrosion Methods and Materials, Emerald | https://doi.org/10.1108/ACMM-03-2023-2774 | SCIE | |
| 14. | Sharanabasava Patil a,* , B. Ramesh a,* , T. Sathish b , A. Saravanan c , Hamad Almujibah d ,Hitesh Panchal e , Emad Makki f,* , Jayant Giri g | Evaluation and optimization of mechanical properties of laterized concrete containing fly ash and steel fiber using Taguchi robust design method | Alexandria Engineering Journal , Elsevier, Volume 87, January 2024, Pages 682-706 | ELSEVIER | https://doi.org/10.1016/j.aej.2023.12.009 | SCIE |
| 15. | Vishal Kumbhar a,* , Anand Pandey a , Fahad M. Alqahtani b , Bharat Singh c ,Chandrakant Sonawane a Hitesh Panchal d , Jayant Giri e , Abhinav Kumarf | Reusing personal protective equipment and waste plastics in biofuel production and use in diesel engines: Priority for the COVID-19 pandemic | Environmental Challenges , Elsevier, Volume 14, January 2024, 100815 | ELSEVIER | https://doi.org/10.1016/j.envc.2023.100815 | SCOPUS |
| 16. | Vanitha Marunganathan, Meenakshi Sundaram Kishore Kumar, Zulhisyam Abdul Kari, Jayant Giri, Mohammed Rafi Shaik, Baji Shaik & Ajay Guru | Marine-derived κ-carrageenan-coated zinc oxide nanoparticles for targeted drug delivery and apoptosis induction in oral cancer | Molecular Biology Reports,Springer, Volume 51, 89, (2024) | Springer | http://dx.doi.org/10.1007/s11033-023-09146-1 | SCIE |
| 17. | Prashant Kamble, Jayant Giri, Emad Makki, Neeraj Sunheriya, Shilpa B. Sahare, Rajkumar Chadge, Chetan Mahatme, Pallavi Giri, Sathish T., and Hitesh Pancha | An Application of Hybrid Taguchi-ANN to Predict Tool Wear for Turning EN24 Materia | AIP Advances , Indexing : SCIE Impact Factor – 1.6 Q2 H Index -73 AIP Advances 14, 015206 (2024) | AIP Advances | doi: 10.1063/5.0186432 | SCIE |
| 18. | Sathish Thanikodi a, M. Meena b, Yagya Dutta Dwivedi c, T. Aravind d, Jayant Giri e, Mohammad Shahzad Samdani f, Lavish Kansal g, Mohd Shahazad h i, Mohammad Ilyas j | Optimizing the Selection of Natural Fibre Reinforcement and Polymer Matrix for Plastic Composite using LS-SVM Technique | CHEMOSPHERE Elsevier, Volume 349, February 2024, 140971 | ELSEVIER | https://doi.org/10.1016/j.chemosphere.2023.140971 | SCIE |
| 19. | T.L. Gilbile a,* , A.P. Pandhare a , Emad Makki c , Bharat Singh d , D.V. Khankal b , A.A. Godse a ,Hitesh Panchal e , Jayant Giri f , Prateek D. Malwe g,h , Abhinav Kumar | Development and performance evaluation of (Sm1-xNdx)0.2O2-δ electrolyte for low-temperature solid oxide fuel cell application | Energy Conversion and Management: X, Elsevier, Volume 21, January 2024, 100518 | ScienceDirect | https://doi.org/10.1016/j.ecmx.2023.100518 | SCIE |
| 20. | T. Sathish a, Sivakumar Karthikeyan b, Ravishankar Sathyamurthy c d, K. Rajaram e, S. Sandeep Kumar f, P. Suresh Kumar g, Jayant Giri n, Kassian T.T. Amesho h i j k l m | Synergistic Effects of Nano-Enhanced Waste Transformer Oil and Hydrogen Premixing on CI Engine Performance and Emissions | International Journal of Hydrogen Energy., Elsevier, Impact Factor – 7.2, Q1 ,H Index -248, Volume 56, 22 February 2024, Pages 484-497 | SpringerLink | https://doi.org/10.1016/j.ijhydene.2023.12.176 | SCIE |
| 21. | Manikandan Dhayalan, Wei Wang, S. U. Mohammed Riyaz, Rakshi Anuja Dinesh, Jayashree Shanmugam, Santiagu Stephen Irudayaraj, Antony Stalin, Jayant Giri, Saurav Mallik & Ruifeng Hu | Advances in Functional Lipid Nanoparticles: From Drug Delivery Platforms to Clinical Applications | International Journal 3 Biotech, Springer, Volume 14, article number 57, (2024) Impact Factor – 2.8, Q2 ,H Index -60 | Springer | https://doi.org/10.1007/s13205-023-03901-8 | SCIE |
| 22. | Sujit Kumar, Icon,Sasanka Sekhor Sharma, Jayant Giri, Icon,Vikramaditya Dave,Mohammad Amir & Hitesh Panchal | Investigation of Electrical, Corporeal, Ocular, and Aquaphobic Properties of Zirconia Thin-Films by Varying Substrate Temperature for High Voltage Insulators | Journal of Asian Ceramic Societies, Taylor and Francis, Volume 12, 2024 – Issue 1, Pages 71-78 | Taylor and Francis | https://doi.org/10.1080/21870764.2024.2307694 | SCIE |
| 23. | Manikandan Natarajan; Thejasree Pasupuleti; Jayant Giri ; Hamad A. Al-Lohedan ; Lakshmi Narasimhamu Katta ; Faruq Mohammad; Neeraj Sunheriya ; Rajkumar Chadge; Chetan Mahatme ; Pallavi Giri; Saurav Mallik; T. Sathish | Optimization of Wire, Spark Erosion Machining of Grade 9 Titanium Alloy (Grade 9) Using a Hybrid Learning Algorithm | AIP Advances, AIP Advances 14, (2024) | AIP Publishing | https://doi.org/10.1063/5.0177658 | SCIE |
| 24. | Manikandan Dhayalan, Sheikdawood Parveen, Sathiyapriya Thirumalaisamy, Faruq Mohammad, Hamad A Al-Lohedan, Savaas Umar Mohammed Riyaz, Rakshi Anuja Dinesh, Jayant Giri, Antony Stalin, Gangireddy Rajasekhar Reddy, Natarajan Anandakumar, Saurav Mallik | Evaluating the Therapeutic Importance of Gold Nanoparticles Formed by the Biogenic Synthesis Route of Madhuca longifolia Reduction. | Bio Resources | 10.15376/biores.19.1.823-841 | SCIE | |
| 25. | Erukala Kalyan Kumar, Subhra Suchmitha Patel, Subrata Kumar Panda, Bhumesh K Patle, Emad Makki, Jayant Giri | A comprehensive exploration of shape memory alloys: Fundamentals, structural reinforcements, nano-analysis, machine learning perspective, and emerging applications | Mechanics of Advanced Materials and Structures | https://doi.org/10.1080/15376494.2024.2307471 | SCIE | |
| 26. | Mushtaque Momin, Faisal Rahmani, Emad Makki, Mukesh Sharma, Jayant Giri, T Sathish | The impact of 180° return bend inclination on pressure drop characteristics and phase distribution during oil-water flow | Heliyon | Elesvier | https://doi.org/10.1016/j.heliyon.2024.e24251 | SCIE |
| 27. | T Satish Kumar, Titus Thankachan, Jayant Giri, Emad Makki, R Dhanasekar, Ajay Guru | Microstructural characterization of in-situ MgAl2O4 nanoparticles reinforced Al–2Mg–1Si composite produced using the ultrasonic assisted stir casting process | Journal of Materials Research and Technology | Elesvier | https://doi.org/10.1016/j.jmrt.2024.01.254 | SCIE |
| 28. | Aman Sharma, Pradeep Kumar Singh, Emad Makki, Jayant Giri, T Sathish | A comprehensive review of critical analysis of biodegradable waste PCM for thermal energy storage systems using machine learning and deep learning to predict dynamic behaviour | Heliyon | Elesvier | https://doi.org/10.1016/j.heliyon.2024.e25800 | SCIE |
| 29. | T Sathish, Saravanan Kathirvel, Yagya Dutta Dwivedi, N Stalin, Jayant Giri, R Saravanan, Emad Makki | Performance enhancement by tungsten trioxide and silicon dioxide mixed nanofluids in solar collector of evacuated tube type | Case Studies in Thermal Engineering | https://doi.org/10.1016/j.csite.2024.104098 | SCIE | |
| 30. | Katta Lakshmi Narasimhamu, Manikandan Natarajan, Pasupuleti Thejasree, Emad Makki, Jayant Giri, Neeraj Sunheriya, Rajkumar Chadge, Chetan Mahatme, Pallavi Giri, T Sathish | Development of Hybrid Optimization Model Using Grey-ANFIS-Jaya Algorithm for CNC Drilling of Aluminium Alloy | Journal of Engineering | https://doi.org/10.1155/2024/1476770 | SCOPUS | |
| 31. | Ramesh Sundar, Mohammad Amir, Ranjith Subramanian, D Prabakar, Jayant Giri, G Balachandran, Furkan Ahmad | Spectral energy balancing system with massive MIMO based hybrid beam forming for wireless 6G communication using dual deep learning model | Heliyon | Elesvier | https://doi.org/10.1016/j.heliyon.2024.e26085 | SCIE |
| 32. | T Sathish, J Giri, R Saravanan | Optimizing laser cladding powder injection parameters to shape bioactive glass nano-coated zirconium oxide for biomedical application | Heliyon | Elesvier | https://doi.org/10.1016/j.heliyon.2024.e25277 | SCIE |
| 33. | Satish Kumar Thandalam, Titus Thankachan, Emad Makki, Jayant Giri, Sathish Thanikodi | Insitu synthesis of Al–MgAl2O4 composites and parametric optimization of tribological characteristics | Heliyon | Elesvier | https://doi.org/10.1016/j.heliyon.2024.e25427 | SCIE |
| 34. | Rajkumar Chadge, Jayant Giri, Mohammad Amir, Farhad Ilahi Bakhsh, Neeraj Sunheriya, Chetan Mahatme, T Sathish | Investigation of Electrical Configuration Topologies for Enhancing the Performance of Solar Photovoltaic Water Pumping System | Electric Power Components and Systems | Taylor and Francis | https://doi.org/10.1080/15325008.2024.2319312 | SCIE |
| 35. | L Kalaivani, RV Maheswari, Emad Makki, Bharat Singh, Sanjay B Warkad, Jayant Giri, B Vigneshwaran, Musaddak Maher Abdul Zahra, Hitesh Panchal | A mathematical model for investigation of dry band location on 22 kV bushing with and without RTV coating: Experimental study | MethodsX | Elsevier | https://doi.org/10.1016/j.mex.2024.102579 | SCIE |
| 36. | Jehad Zuhair Tayyeb, Madhu Priya, Ajay Guru, Meenakshi Sundaram Kishore Kumar, Jayant Giri, Akash Garg, Rutvi Agrawal, Khairiyah Binti Mat, Jesu Arockiaraj | Multifunctional curcumin mediated zinc oxide nanoparticle enhancing biofilm inhibition and targeting apoptotic specific pathway in oral squamous carcinoma cells | Molecular biology reports 51 (1) | Springer | https://doi.org/10.1007/s11033-024-09407-7 | SCIE |
| 37. | Mohan Kumar Anand Raj, Rajasekar Rathanasamy, Parameshwaran Rathinasamy, Suresh Muthusamy, Md Irfanul Haque Siddiqui, Jayant Giri, Mohd Asif Shah | Investigation of viscoelastic behavior of Abaca-reinforced epoxy composites | AIP Advances, AIP Advances 14, (2024) | AIP Publishing | https://doi.org/10.1063/5.0188925 | SCIE |
| 38. | T Sathish, Jayant Giri, Emad Makki | Sisal and jute composite containing carbon nanotubes for improved mechanical and thermal performance | AIP Advances, AIP Advances 14, (2024) | AIP Publishing | https://doi.org/10.1063/5.0200131 | SCIE |
| 39. | Shashwath Patil, T Sathish, Emad Makki, Jayant Giri | Experimental study on mechanical properties of FDM 3D printed polylactic acid fabricated parts using response surface methodology | AIP Advances, AIP Advances 14, (2024) | AIP Publishing | https://doi.org/10.1063/5.0191017 | SCIE |
| 40. | Naresh Kumar Jothi, Senthil Kumar Dayalan, Jayant Giri, Wesam Atef Hatamleh, Hitesh Panchal | Dynamic interactions of HSV-2 and HIV/AIDS: A mathematical modeling approach | AIP Advances, AIP Advances 14, (2024) | AIP Publishing | https://doi.org/10.1063/5.0189284 | SCIE |
| 41. | Chetan Mahatme, Jayant Giri, Hamad A Al-Lohedan, Faruq Mohammad, Neeraj Sunheriya, Rajkumar Chadge, Pallavi Giri, Saurav Mallik, Manikandan Dhayalan | Performance evaluation of a mechanical ventilation simulation model for diverse respiratory | AIP Advances, AIP Advances 14, (2024) | AIP Publishing | https://doi.org/10.1063/5.0189452 | SCIE |
| 42. | A Muthulakshmanan, R Adalarasan, M Santhanakumar, A Gnanavelbabu, Emad Makki, Jayant Giri | An investigation into cut surface quality of Al6061/Al2O3/B4C composite using hydro-abrasive machining process | AIP Advances, AIP Advances 14, (2024) | AIP Publishing | https://doi.org/10.1063/5.0192582 | SCIE |
| 43. | Jothi Arunachalam, T Sathish, Emad Makki, Jayant Giri | Influence of machining process of MoS2/B4C/Az31 Mg alloy composite and its tribological characteristics | AIP Advances, AIP Advances 14, (2024) | AIP Publishing | https://doi.org/10.1063/5.0200492 | SCIE |
| 44. | T Sathish, Jayant Giri, Ibrahim Albaijan | Investigation into improved characteristics of nanocomposites of kenaf and basalt fibers strengthened with titanium oxide nanoparticles | AIP Advances, AIP Advances 14, (2024) | AIP Publishing | https://doi.org/10.1063/5.0204286 | SCIE |
| 45. | Arul Raj AM, Jayant Giri, Naim Ahmad, Ahmed Said Badawy | Detection of Covid-19 based on convolutional neural networks using pre-processed chest X-ray images | AIP Advances, AIP Advances 14, (2024) | AIP Publishing | https://doi.org/10.1063/5.0200397 | SCIE |
| 46. | Ahmad Husain, Khalid Ansari, Dhiraj K Mahajan, Muthusamy Kandasamy, MNM Ansari, Jayant Giri, Hamad A Al-Lohedan | Harnessing sustainable N-doped activated carbon from walnut shells for advanced all-solid-state supercapacitors and targeted rhodamine B dye adsorption | Journal of Science: Advanced Materials and Devices | https://doi.org/10.1016/j.jsamd.2024.100699 | SCIE | |
| 47. | D Sungeetha, Carmel Mary Belinda MJ, Jayant Giri, Emad Makki, Hitesh Panchal, S Gomathi, P Deepa, Aravind Kumar, TR Praveenkumar | An inimitable Elman network based fire hawk controller and skill optimized power tracker with ultra gain converter for improving the performance of PV tied EV systems | Case Studies in Thermal Engineering | https://doi.org/10.1016/j.csite.2024.104183 | SCIE | |
| 48. | Sheriff F Mohammed Ajmal, L Natrayan, Jayant Giri, Emad Makki, Mohd Asif Shah, Saurav Mallik | Utilization of response surface methodology to optimize the mechanical behaviour of flax/nano TiO2/Epoxy based hybrid composites under liquid nitrogen environment | Frontiers in Materials | https://doi.org/10.3389/fmats.2024.1344351 | SCIE | |
| 49. | N Praveen, Siddesh Kumar NG, C Durga Prasad, Jayant Giri, Ibrahim Albaijan, US Mallik, T Sathish | Effect of pulse time (Ton), pause time (Toff), peak current (Ip) on MRR and surface roughness of Cu–Al–Mn ternary shape memory alloy using wire EDM | Journal of Materials Research and Technology Publisher Elsevier | Elsevier | https://doi.org/10.1016/j.jmrt.2024.03.122 | SCIE |
| 50. | V Boobalan, T Sathish, Jayant Giri, Emad Makki | Impact of nano-hybridization on flexural and impact behavior of basalt/glass fiber-epoxy composites for automotive structures | AIP Advances, 14, (2024) | AIP Publishing | https://doi.org/10.1063/5.0199895 | SCIE |
| 51. | Christo George, S Senthil Selvan, V Sathish Kumar, G Murali, Jayant Giri, Emad Makki, T Sathish | Enhancing the fire-resistant performance of concrete-filled steel tube columns with steel fiber-reinforced concrete | Case Studies in Construction Materials, Elsevier | Elsevier | https://doi.org/10.1016/j.cscm.2023.e02741 | SCIE |
| 52. | G H Waghmare1 · L. Karthick2 · Mallireddy Naresh3 · Kandavalli SumanthRatna4 | Characterization of vinyl ester–based biocomposites using grape stalk lignin biopolymer and Celosia cristata stem fbers: a characterization study | Biomass Conversion and Biorefnery, Springer | http://dx.doi.org/10.14445/22315381/IJETT-V72I3P115 | Scopus | |
| 53. | Sachin P Ambade, Chetan K Tembhurkar, Awanikumar Patil, Atul V Tidke, Sagar D Shelare, Chander Prakash, Milos B Djukic, Nima Khosravi, Prabhu Paramasivam | Microstructure, mechanical properties and sensitization of ultra-low nickel Cr-Mn Austenitic stainless steels | Journal of Materials Research and Technology, Elsevier | Elsevier | https://doi.org/10.1016/j.jmrt.2024.04.127 | SCIE |
| 54. | Vijay KHAWALE, Ali ALSHAMRANI , Satishkumar PALANISAMYc*, Barun HALDARd, Sivakumar RAMAMURTHYe , Justin Maria Hillary JOHN ,Suresh KRISHNAMOORTHYg , Manish SHARMA , and Nashmi H. ALRASHEEDI | ANALYSIS OF INTERFACIAL HEAT TRANSFER COEFFICIENTS IN SQUEEZE CASTING OF AA6061 ALUMINUM ALLOY WITH H13 STEEL DIE Impact of Section Thickness on Thermal Behavior | THERMAL SCIENCE: Year 2024, Vol. 28, No. 1A, pp. 223-232 | https://doi.org/10.2298/TSCI230310272K | Scopus | |
| 55. | MS Tufail, Jayant Giri, Emad Makki, T Sathish, Rajkumar Chadge, Neeraj Sunheriya | Machinability of different cutting tool materials for electric discharge machining: A review and future prospects | AIP Advances 14, 040702 (2024) | AIP Publishing | https://doi.org/10.1063/5.0201614 | SCIE |
| 56. | Kapil Surani, Miguel Villagómez Galindo, Hiteshkumar Patel, Vladimir Ivanovich Velkin, Md Irfanul Haque Siddiqui, Abhinav Kumar, Jayant Giri, Intesaaf Ashraf, Mohd Asif Shah | Effect of copper addition on mechanical properties and microstructures of LM25 cast alloys | AIP Advances 14, 045025 (2024) | AIP Publishing | https://doi.org/10.1063/5.0191897 | SCIE |
| 57. | Julius Fusic S, Jayant Giri, Emad Makki, R Sitharthan, Shunmathi Murugesan, Abhijit Bhowmik | Momordica charantia leaf disease detection and treatment using agricultural mobile robot | AIP Advances 14, 045318 (2024) | AIP Publishing | https://doi.org/10.1063/5.0204280 | SCIE |
| 58. | G Vidyasagar Reddy, Hariprasad Tarigonda, RL Krupakaran, D Raghurami Reddy, Jayant Giri, Hamad A Al-Lohedan, Faruq Mohammad, Neeraj Sunheriya, Saurav Mallik, T Sathish | Performance evaluation of low heat rejection diesel engine operated with biofuels under-selective catalytic reduction | AIP Advances 14, 045015 (2024) | AIP Publishing | https://doi.org/10.1063/5.0190928 | SCIE |
| 59. | Murthy B. R. N.; Anupama Hiremath, ;Jayant Giri ;Emad Makki, Sathish T.; Gururaj Bolar; Vishwanatha H. M. | A comparative study on milling-induced surface roughness during milling of jute–epoxy and carbon–epoxy composites and optimization for better surface finish through Taguchi and RSM techniques | AIP Advances 14, 045212 (2024) | AIP Publishing | https://doi.org/10.1063/5.0203271 | SCIE |
| 60. | Shirsendu Das, Rajdeep Paul, Abhijit Bhowmik, Jayant Giri, Ibrahim Albaijan, Chander Prakash | Assessment of the influence of flushing on the wear and morphological properties of the tool during electrical discharge machining | AIP Advances 14, 045012 (2024) | AIP Publishing | https://doi.org/10.1063/5.0196307 | SCIE |
| 61. | PA Thakare, Neeraj Kumar, VB Ugale, Jayant Giri, Neeraj Sunheriya, Hamad A Al-Lohedan | Effect of impact and flexural loading on hybrid composite made of kevlar and natural fibers | AIP Advances 14, 045110 (2024) | AIP Publishing | https://doi.org/10.1063/5.0195907 | SCIE |
| 62. | V Boobalan, T Sathish, Jayant Giri, Emad Makki | Impact of nano-hybridization on flexural and impact behavior of basalt/glass fiber-epoxy composites for automotive structures | AIP Advances 14, 045202 (2024) | AIP Publishing | https://doi.org/10.1063/5.0199895 | SCIE |
| 63. | Mohammed Rafi Shaik, Karthikeyan Kandaswamy, Ajay Guru, Haroon Khan, Jayant Giri, Saurav Mallik, Mohd Asif Shah, Jesu Arockiaraj | Targeted piperine-coated zinc oxide nanoparticle induces the biofilm inhibition of dental pathogens and apoptosis of oral cancer through the BCL-2/BAX/P53 signaling pathway | BMC Health Oral Care | https://doi.org/10.21203/rs.3.rs-3990413/v1 | SCIE | |
| 64. | Geetha Venkatachalam, Jayant Giri, Saurav Mallik, Gandarvakottai Senthilkumar Arumugam, Manavalan Arulmani, Vimal Kumar Dewangan, Mukesh Doble, Zhongming Zhao | Immunomodulatory zymosan/ι-carrageenan/ agarose hydrogel for targeting M2 to M1 macrophages (antitumoral) | RSC Advances | Elsevier | https://doi.org/10.1039/d3ra06978h | SCOPUS |
| 65. | Hussain Pipwala, Ragesh Kapadia, Hitesh Panchal, Bharat Singh, Prateek D Malwe, Abhinav Kumar, Emad Makki, Jayant Giri | Performance investigation of a direct-cooled refrigerator with CuO-R600a as a nanorefrigerant | Case Studies in Chemical and Environmental Engineering, Elsevier | Elsevier | https://doi.org/10.1016/j.cscee.2023.100569 | SCIE |
| 66. | G Anjaneya, S Sunil, NK Manjunatha, Jayant Giri, Hamad A Al-Lohedan, T Sathish, C Durga Prasad | Performance analysis and optimization of thermal barrier coated piston diesel engine fuelled with biodiesel using RSM | Case Studies in Thermal Engineering, Elsevier | Elsevier | https://doi.org/10.1016/j.csite.2024.104351 | SCIE |
| 67. | M Kandasamy, Ahmad Husain, S Suresh, Jayant Giri, Dheyaa J Jasim, P Rameshkumar, Hamad A Al-Lohedan, S Thambidurai, Niraj Kumar, MNM Ansari, S Murugesan | Enhanced dye-sensitized solar cell performance and electrochemical capacitive behavior of bi-functional ZnO/NiO/Co3O4 ternary nanocomposite prepared by chemical co-precipitation method | Journal of Science: Advanced Materials and Devices, Elsevier | Elsevier | https://doi.org/10.1016/j.jsamd.2024.100726 | SCIE |
| 68. | Abhijit Bhowmik, Biplab Bhattacharjee, Abayomi Adewale Akinwande, Prasanta Majumder, Jayant Giri, P Satish Kumar, Jitendra Kumar Katiyar | Optimization of tribological performance of TiB2-reinforced Al6063 composite using grey-fuzzy tool | Proceedings of the Institution of Mechanical Engineers, Part J: Journal of Engineering Tribology, SAGE Publications | https://doi.org/10.1177/13506501241246845 | SCIE | |
| 69. | Karthikeyan Kandaswamy, Ajay Guru, Siva Prasad Panda, Anahas Perianaika Matharasi Antonyraj, Zulhisyam Abdul Kari, Jayant Giri, Bader O Almutairi, Selvaraj Arokiyaraj, Guilherme Malafaia, Jesu Arockiaraj | Polystyrene nanoplastics synergistically exacerbate diclofenac toxicity in embryonic development and the health of adult zebrafish | Comparative Biochemistry and Physiology Part C: Toxicology & Pharmacology , Elsevier | Elsevier | https://doi.org/10.1016/j.cbpc.2024.109926 | SCIE |
| 70. | Shweta Kharya, Sunita Soni, Abhilash Pati, Amrutanshu Panigrahi, Jayant Giri, Hong Qin, Saurav Mallik, Debasish Swapnesh Kumar Nayak, Tripti Swarnkar | Weighted Bayesian Belief Network for diabetics: a predictive model | Frontiers in Artificial Intelligence, Frontiers Media SA | https://doi.org/10.3389/frai.2024.1357121 | SCIE | |
| 71. | Sohamkumar Chauhan, Ramalingaswamy Cheruku, Damodar Reddy Edla, Lavanya Kampa, Soumya Ranjan Nayak, Jayant Giri, Saurav Mallik, Srinivas Aluvala, Vijayasree Boddu, Hong Qin | BT-CNN: a balanced binary tree architecture for classification of brain tumour using MRI imaging | Frontiers in Physiology, Frontiers Media SA | https://doi.org/10.3389/fphys.2024.1349111 | SCIE | |
| 72. | Sujit Kumar, Sasanka Sekhor Sharma, Jayant Giri, Emad Makki, T Sathish, Hitesh Panchal | Perovskite materials with improved stability and environmental friendliness for photovoltaics | Frontiers in Mechanical Engineering, Frontiers Media SA | https://doi.org/10.3389/fmech.2024.1357087 | SCOPUS | |
| 73. | Manikandan Shenbagam, Ganesan Kanagaraj, Jayant Giri, Vincent F Yu, Hong Qin, Saurav Mallik | Optimizing blood glucose regulation in type 1 diabetes: A fractional order controller approach | AIP Advances, AIP Publishing | AIP Publishing | https://doi.org/10.1063/5.0199980 | SCIE |
| 74. | S Jothi Arunachalam, R Saravanan, T Sathish, Sajjad Haider, Jayant Giri | Investigation of chemically treated jute/kenaf/glass fiber with TiO2 nano-filler for tensile and impact characteristics | AIP Advances , AIP Publishing | AIP Publishing | https://doi.org/10.1063/5.0206141 | SCIE |
| 75. | P. Srilatha, Shailesh P. Bendale *, Monisha Singh, Nitin Chakole ‡, Girish M. Dhote | Machine intelligence security : A methodological blend of fuzzy logic in industry 4.0 algorithms | Journal of Discrete Mathematical Sciences & Cryptography ISSN 0972-0529 (Print), ISSN 2169-0065 (Online) Vol. 27 (2024), No. 2-B, pp. 689–701 | DOI : 10.47974/JDMSC-1920 | ESCI, Scopus | |
| 76. | Ravindra Vutukuru, Jayant Giri, Mohammad Amir, Rajkumar Chadge, T Sathish | Solar energy-assisted CCHP cycles for dairy applications in rural sector with effect assessment of reheating on novel CO2 working fluid | Cogent Engineering | https://doi.org/10.1080/23311916.2024.2327568 CrossMark Logo | SCIE | |
| 77. | Balachandran Subramanian, Zhongshan Xu, Kumaravel Jeeva Jothi, Emad Makki, Selvamani Muthamizh, Dhilip Kumar Rajaiah, Natarajan Prakash, Nagarani Sandran, Jayant Giri, Feng Wang, Mingshu Yang | Hierarchically, Low Band Gap Nanohybrid InVO4-CdS Heterojunction for Visible Light-Driven Toxic Organic Dye Degradations | ACS Omega | https://doi.org/10.1021/acsomega.3c08850 | SCIE | |
| 78. | T Sathish, Umit Agbulut, Mohd Ubaidullah, R Saravanan, Jayant Giri, Shoyebmohamad F Shaikh | Waste to fuel: A detailed combustion, performance, and emission characteristics of a CI engine fuelled with sustainable fish waste management augmentation with alcohols and nanoparticles | Energy | https://doi.org/10.1016/j.energy.2024.131412 | SCIE | |
| 79. | Soorya Prakash K, Jayant Giri, Hamad A Al-Lohedan, T Sathish | Optimized deep learning regression assisted wear rate analysis of Cu–AlCoCrCuFe HEA composite | AIP Advances 14, 055002 (2024) | AIP Publishing | https://doi.org/10.1063/5.0194685 | SCIE |
| 80. | Karthikeyan Kandaswamy, Raghunandhakumar Subramanian, Jayant Giri, Ajay Guru, Jesu Arockiaraj | A Robust Strategy Against Multi-Resistant Pathogens in Oral Health: Harnessing the Potency of Antimicrobial Peptides in Nanofiber-Mediated Therapies | International Journal of Peptide Research and Therapeutics | https://doi.org/10.1016/j.msec.2021.112537 | SCIE | |
| 81. | T Sathish, Jayant Giri, R Saravanan, Emad Makki | Flax/ramie hybrid fibers enhanced with SiC nanoparticles | AIP Advances 14, 055102 (2024) | AIP Publishing | https://doi.org/10.1063/5.0200142 | SCIE |
| 82. | TL Gilbile, AP Pandhare, Emad Makki, Bharat Singh, DV Khankal, AA Godse, Hitesh Panchal, Jayant Giri, Prateek D Malwe, Abhinav Kumar | Development and performance evaluation of (Sm1-xNdx)0.2O2-δ electrolyte for low-temperature solid oxide fuel cell application | Energy Conversion and Management: X | https://doi.org/10.1016/j.ecmx.2023.100518 | SCIE | |
| 83. | Kapil Surani, Miguel Villagómez Galindo, Hiteshkumar Patel, Vladimir Ivanovich Velkin, Md Irfanul Haque Siddiqui, Abhinav Kumar, Jayant Giri, Intesaaf Ashraf, Mohd Asif Shah | Effect of copper addition on mechanical properties and microstructures of LM25 cast alloys | AIP Advances 14, 045025 (2024) | AIP Publishing | https://doi.org/10.1063/5.0191897 | SCIE |
| 84. | R Muthukumaran, Ajith Arul Daniel, M Nithya, A Parthiban, T Sathish, Jayant Giri, Hamad A Al-Lohedan | Characterization on properties of Al7050/TiC/BN hybrid metal matrix composite | AIP Advances 14, 045318 (2024) | AIP Publishing | https://doi.org/10.1063/5.0204280 | SCIE |
| 85. | Julius Fusic S, Jayant Giri, Emad Makki, R Sitharthan, Shunmathi Murugesan, Abhijit Bhowmik | Momordica charantia leaf disease detection and treatment using agricultural mobile robot | AIP Advances 14, 045214 (2024) | AIP Publishing | https://doi.org/10.1063/5.0190928 | SCIE |
| 86. | G Vidyasagar Reddy, Hariprasad Tarigonda, RL Krupakaran, D Raghurami Reddy, Jayant Giri, Hamad A Al-Lohedan, Faruq Mohammad, Neeraj Sunheriya, Saurav Mallik, T Sathish | Performance evaluation of low heat rejection diesel engine operated with biofuels under-selective catalytic reduction | AIP Advances 14, 045015 (2024) | AIP Publishing | https://doi.org/10.1063/5.0194458 | SCIE |
| 87. | Shirsendu Das, Rajdeep Paul, Abhijit Bhowmik, Jayant Giri, Ibrahim Albaijan, Chander Prakash | Assessment of the influence of flushing on the wear and morphological properties of the tool during electrical discharge machining | AIP Advances 14, 045012 (2024) | AIP Publishing | https://doi.org/10.1063/5.0196307 | SCIE |
| 88. | PA Thakare, Neeraj Kumar, VB Ugale, Jayant Giri, Neeraj Sunheriya, Hamad A Al-Lohedan | Effect of impact and flexural loading on hybrid composite made of kevlar and natural fibers | AIP Advances 14, 045110 (2024) | AIP Publishing | https://doi.org/10.1063/5.0195907 | SCIE |
| 89. | Aman Sharma, Pradeep Kumar Singh, Emad Makki, Jayant Giri, T Sathish | A comprehensive review of critical analysis of biodegradable waste PCM for thermal energy storage systems using machine learning and deep learning to predict dynamic behavior | Heliyon | Elsevier | https://doi.org/10.1016/j.heliyon.2024.e25800 | SCIE |
| 90. | Manikandan Natarajan, Thejasree Pasupuleti, Jayant Giri, Hamad A Al-Lohedan, Lakshmi Narasimhamu Katta, Faruq Mohammad, Neeraj Sunheriya, Rajkumar Chadge, Chetan Mahatme, Pallavi Giri, Saurav Mallik, T Sathish | Optimization of wire spark erosion machining of Grade 9 titanium alloy (Grade 9) using a hybrid learning algorithm | AIP Advances 14, 015319 (2024) | AIP Publishing | https://doi.org/10.1063/5.0177658 | SCIE |
| 91. | Ashvin Amale; Ajay K. S. Singholi, Satishkumar P ; Jayant Giri ; Ibrahim Albaijan ; Ajay Guru | Fuzzy logic-driven genetic algorithm strategies for ultrasonic welding of heterogeneous metal sheets | AIP Advances 14, 055117 (2024) | Elsevier | https://doi.org/10.1063/5.0207578 | SCIE |
| 92. | T Sathish, R Saravanan, S Jothi Arunachalam, A Parthiban, Jayant Giri | Comparing Kevlar Fiber influence on PP/sisal/SiO2 nanoparticle fillers/Kevlar hybrid nanocomposites with plain nanocomposite for enhanced mechanical properties | Interactions | Springer | https://doi.org/10.1016/j.jmrt.2023.12.093 | SCIE |
| 93. | Rakesh Adakane, Prashant V Washimkar, Sharad S Chaudhari, Jayant Giri, T Sathish, A Parthiban, Chetan Mahatme | Prediction and analysis of material removal rate and Tool wear for electric discharge machining of H16 material using ANN and ANOVA | Interactions, Springer | Springer | https://doi.org/10.1016/s0924-0136(01)00846-9 | SCOPUS |
| 94. | J Maniraj, Felix Sahayaraj, Jayant Giri, T Sathish, Mohammed Rafi Shaik | Enhancing performance of Prosopis juliflora fiber reinforced epoxy composites with silane treatment and Syzygium cumini filler | Journal of Materials Research and Technology, Elsevier | Elsevier | https://doi.org/10.1016/j.jmrt.2024.06.058 | SCIE |
| 95. | Navaneethan Sabarirajan, Abdullah Naveen Sait, Sathish Thanikodi, Jayant Giri | A novel technique to examine the corrosion resistance of FSW dissimilar aluminium alloys under three different corrosion solutions | The International Journal of Advanced Manufacturing Technology | https://doi.org/10.1016/j.jmrt.2015.01.007 | SCIE | |
| 96. | Nivin Joy, J Jayaprabakar, M Anish, Jayant Giri, Emad Makki, T Sathish | Purification and investigation of bio-glycerol as heat transfer fluid and as coolant in automobile radiators | Case Studies in Thermal Engineering | Springer | SCIE | |
| 97. | Abhilash Purohit, Janaki Dehury, Ayush Sitani, Pravat Ranjan Pati, Jayant Giri, T Sathish, A Parthiban | A novel study on the stacking sequence and mechanical properties of Jute-Kevlar-Epoxy composites | Interactions, Springer | Springer | https://link.springer.com/article/10.1007/s10751-024-01946-6 | SCOPUS |
| 98. | Suganiya Umapathy, Ieshita Pan, Praveen Kumar Issac, Meenakshi Sundaram Kishore Kumar, Jayant Giri, Ajay Guru, Jesu Arockiaraj | Selenium Nanoparticles as Neuroprotective Agents: Insights into Molecular Mechanisms for Parkinson’s Disease Treatment | Molecular Neurobiology | Elsevier | https://link.springer.com/article/10.1007/s12035-024-04253-x | SCIE |
| 99. | T Sathish, Divity SaiKumar, Shashwath Patil, R Saravanan, Jayant Giri, Ayman A Aly | Exponential smoothing method against the gradient boosting machine learning algorithm-based model for materials forecasting to minimize inventory | AIP Advances 14, 065013 (2024) | AIP Publishing | https://doi.org/10.1063/5.0208491 | SCIE |
| 100. | Uday Singh Patil, Sanjay P Raut, Jayant Giri, Faruq Mohammad, Mohd Sajid Ali, T Sathish | Exploring the potential of textile effluent sludge as a construction material through comprehensive characterization and analysis | AIP Advances 14, 065308 (2024) | AIP Publishing | https://doi.org/10.1063/5.0207760 | SCIE |
| 101. | T Satish Kumar, Titus Thankachan, Abhijit Bhowmik, Emad Makki, Jayant Giri, Shirsendu Das | Development and characterization of AZ91/AlN magnesium matrix composites via friction stir processing | AIP Advances 14, 065301 (2024) | AIP Publishing | https://doi.org/10.1063/5.0202057 | SCIE |
| 102. | Jayant Giri, T Sathish, Taukeer Sheikh, Neeraj Sunehriya, Pallavi Giri, Rajkumar Chadge, Chetan Mahatme, A Parthiban | Automatic liver segmentation using U-Net deep learning architecture for additive manufacturing | Interactions, Springer | Springer | https://link.springer.com/article/10.1007/s10751-024-01927-9 | SCOPUS |
| 103. | Jayant Giri, Neeraj Sunheriya, T Sathish, Yash Kadu, Rajkumar Chadge, Pallavi Giri, A Parthiban, Chetan Mahatme | Optimization of process parameters to improve mechanical properties of fused deposition method using taguchi method | Interactions, Springer | Springer | https://link.springer.com/article/10.1007/s10751-024-01925-x | SCOPUS |
| 104. | S Sathees Kumar, P Shyamala, Pravat Ranjan Pati, Jayant Giri, Emad Makki, T Sathish | Mechanical (static and dynamic) characterization and thermal stability of hybrid green composites for engineering applications | Journal of Materials Research and Technology | Elsevier | https://doi.org/10.1016/j.jmrt.2024.05.132 | SCIE |
| 105. | T Sathish, Sethala LaluPrasad, Shashwath Patil, Ahmed Ahmed Ibrahim, Salahuddin Khan, R Saravanan, Jayant Giri | Testing the auto-regressive integrated moving average approach vs the support vector machines-based model for materials forecasting to reduce inventory | AIP Advances 14, 055215 (2024) | AIP Publishing | https://doi.org/10.1063/5.0208049 | SCIE |
| 106. | T Ashok, T Sathish, Ahmed Ahmed Ibrahim, Salahuddin Khan, Shashwath Patil, R Saravanan, Jayant Giri | Materials requirement prediction challenges addressed through SDM and MEIO | AIP Advances 14, 055316 (2024) | AIP Publishing | https://doi.org/10.1063/5.0206352 | SCIE |
| 107. | T Sathish, Jayant Giri, R Saravanan, Mohd Ubaidullah, Sumarlin Shangdiar, Sioni Iikela, Thandiwe Sithole, Kassian TT Amesho | Amplifying thermal performance of solar flat plate collector by Al2O3/Cu/MWCNT/SiO2 mono and hybrid nanofluid | Applied Thermal Engineering | https://doi.org/10.1016/j.applthermaleng.2024.123692 | SCIE | |
| 108. | T Sathish, Jayant Giri, R Saravanan, Mohd Sajid Ali, N Muthukumaran | Solar FPC performance enrichment with Al2O3/SiO2 nanofluids and Hybrid nanofluid | Case Studies in Thermal Engineering | https://doi.org/10.1016/j.csite.2024.104718 | SCIE | |
| 109. | Rahul Thakur, Geeta Sikka, Urvashi Bansal, Jayant Giri, Saurav Mallik | Deadline-aware and energy efficient IoT task scheduling using fuzzy logic in fog computing | Multimedia Tools and Applications | https://link.springer.com/article/10.1007/s11042-024-19509-w | SCIE | |
| 110. | T Sathish, Jayant Giri, R Saravanan, J Aravind Kumar | Enhancing Thermal Performance: Utilizing Carbon Nanoparticles from Tobacco Waste Butts in Evacuated Tube Collectors | International Journal of Thermofluids | https://doi.org/10.1016/j.ijft.2024.100733 | SCIE | |
| 111. | Chetan Mahatme, Jayant Giri, Faruq Mohammad, Mohd Sajid Ali, Thanikodi Sathish, Neeraj Sunheriya, Rajkumar Chadge | Experimental and numerical investigation of PLA based different lattice topologies and unit cell configurations for additive manufacturing | The International Journal of Advanced Manufacturing Technology, Springer | Springer | https://link.springer.com/article/10.1007/s00170-024-13882 | SCIE |
| 112. | Vijayananth Kavimani, Pudhupalayam Muthukutti Gopal, Keerthiveettil Ramakrishnan Sumesh, Nachimuthu Radhika, Jayant Giri | Optimization of WEDM parameters for machining Mg-Li-RE alloy using CRITIC-COCOSO approach | International Journal on Interactive Design and Manufacturing (IJIDeM) | Springer | https://link.springer.com/article/10.1007/s12008-024-01913-z | SCIE |
| 113. | Kunjabihari Swain, Murthy Cherukuri, Indu Sekhar Samanta, Abhilash Pati, Jayant Giri, Amrutanshu Panigrahi, Hong Qin, Saurav Mallik | Fuzzy Markov model for the reliability analysis of hybrid microgrids | Frontiers in Computer Science | https://www.frontiersin.org/journals/computer-science/articles/10.3389/fcomp.2024.1406086/full | SCOPUS | |
| 114. | J Aravind Kumar, S Sathish, D Prabu, Jayant Giri, Emad Makki, J Jayaprabakar, Gulnar K Ziyayeva, Omirserik Baigenzhenov, T Sathish, TR Praveenkumar | Waste shrimp shell mediated Chitosan-Magnesium Oxide nanocomposite: Synthesis, characterization and exploitation towards acenaphthene removal from aqueous solution | Alexandria Engineering Journal | https://doi.org/10.1016/j.aej.2024.06.014 | SCIE | |
| 115. | Sathish Thanikodi, Jayant Giri, Praveenkumar Thaloor Ramesh, Aravind Kumar Jagadeesan, Rathinasamy Saravanan | Optimization of friction stir processing to improve the mechanical properties of bone fixation plate inputs made of ZK60 magnesium alloy | The International Journal of Advanced Manufacturing Technology | https://link.springer.com/article/10.1007/s00170-024-14002-y | SCIE | |
| 116. | Mohammed Rafi Shaik, Karthikeyan Kandaswamy, Ajay Guru, Haroon Khan, Jayant Giri, Saurav Mallik, Mohd Asif Shah, Jesu Arockiaraj | Piperine-coated zinc oxide nanoparticles target biofilms and induce oral cancer apoptosis via BCl-2/BAX/P53 pathway | BMC Oral Health | https://link.springer.com/article/10.1186/s12903-024-04399-z | SCIE | |
| 117. | Vijayananth Kavimani, Pudhupalayam Muthukutti Gopal, Keerthiveettil Ramakrishnan Sumesh, Nachimuthu Radhika, Jayant Giri | Optimization of WEDM parameters for machining Mg-Li-RE alloy using CRITIC-COCOSO approach | International Journal on Interactive Design and Manufacturing (IJIDeM) | Springer | https://link.springer.com/article/10.1007/s12008-024-01913-z | SCOPUS |
| 118. | AH Pundkar, Jayant Giri, T Sathish, AS Daryapurkar, Rajkumar Chadge, A Parthiban | Optimizing air conditioning efficiency: Utilizing nano-oxides ZnO, CuO, and TiO2 with traditional and alternative refrigerants in medium temperature range cooling systems | Interactions | Springer | https://link.springer.com/article/10.1007/s10751-024-01931-z | SCOPUS |
| 119. | S Julius Fusic, T Sugumari, Jayant Giri, R Sitharthan, Ahmed Said Badawy, Naim Ahmad, T Sathish | A compact smiley shaped flexible patch antenna for ISM band applications | AIP Advances 14, 065332 (2024) | AIP Publishing | https://doi.org/10.1063/5.0202950 | SCIE |
| 120. | Jayashree PK, Murthy BRN, Anupama Hiremath, Jayant Giri, Rajeh Alotaibi, Bhagya Laxmi | An experimental analysis on sliding wear characteristics of TIG-welded Al6061 reinforced with SiC | AIP Advances 14, 065331 (2024) | AIP Publishing | https://doi.org/10.1063/5.0213976 | SCIE |
| 121. | M Kandasamy, Ahmad Husain, S Suresh, 999999999999999999999999999 Dheyaa J Jasim, P Rameshkumar, Hamad A Al-Lohedan, S Thambidurai, Niraj Kumar, MNM Ansari, S Murugesan | Enhanced dye-sensitized solar cell performance and electrochemical capacitive behavior of bi-functional ZnO/NiO/Co3O4 ternary nanocomposite prepared by chemical co … | Journal of Science: Advanced Materials and Devices, Vol. 9 (2024), | Elsevier | https://doi.org/10.1016/j.jsamd.2024.100726 | SCIE |
| 122. | Dr. P.D. Kamble | Experimental Investigation of Digging Machine Powered by Solar Energy | 2nd International Conference on Frontier material in Science 21st and 22nd July 2023, in association with American Institute of Physics (AIP), USA indexed by Scopus and WoS (ESCI). July 2023 | SCOPUS | ||
| 123. | Dr. P.D. Kamble | DESIGN AND FABRICATION OF DIGGING MACHINE FOR AGRICUTURE APPLICATION | 2nd International Conference on Frontier material in Science 21st and 22nd July 2023, in association with American Institute of Physics (AIP), USA indexed by Scopus and WoS (ESCI). July 2023 | SCOPUS | ||
| 124. | Prof. Y.Y. Nandurkar | PERFORMANCE IMPROVEMENT OF MJT SOLAR CELL BY USING VARIOUS ACTIVE AND PASSIVE COOLING TECHNIQUES | 38th National Convention ofMechanical Engineering, National Seminar on Emerging trends and developmnt on smart technologies, Renewable energy and mechanical system design. 8-9 Sept 2023 | SCOPUS | ||
| 125. | Prof. V.J.Thakare | Design and Experimental Analysis of Sensor based wedding Robot for Agriculture Application | 38th National Convention ofMechanical Engineering, National Seminar on Emerging trends and developmnt on smart technologies, Renewable energy and mechanical system design. 8-9 Sept 2023 | SCOPUS | ||
| 126. | Prof. P.N. Shende | Implementation of lean 6σ in Small-Sized Manufacturing Enterprises in the plastic industry | 4th International Conference on Functional Materials, Manufacturing and Performances (ICFMMP-2023) held on August 25-26, 2023 | SCOPUS | ||
| 127. | Prof. P.N. Shende | Lean Six sigma Implementation in small Industries: Review the documents | Intellegent Technologies for Sustainable Energy in Management and Control (ITSEMC), YCCE Nagpur, OCT-23 | SCOPUS | ||
| 128. | Prof. P.A. Hatwalne | Intellegent Technologies for Sustainable Energy in Management and Control (ITSEMC), YCCE Nagpur | Intellegent Technologies for Sustainable Energy in Management and Control (ITSEMC), YCCE Nagpur, OCT-23 | SCOPUS | ||
| 129. | Prof. A.B. Amale | Design and Development of Drone Frame and Optimization of Thrust Efficiency Using Ducted Propellers | Intellegent Technologies for Sustainable Energy in Management and Control (ITSEMC), YCCE Nagpur, OCT-23 | SCOPUS | ||
| 130. | Prof. N.D. Gedam | DESIGN AND DEVELOPMENT OF MANUAL HANDING PORTABLE PLASTIC LAYING MULCHING MACHINE FOR SMALL SCALE FARMERS | Intellegent Technologies for Sustainable Energy in Management and Control (ITSEMC), YCCE Nagpur, OCT-23 | SCOPUS | ||
| 131. | Prof. D.Y.Shahare | Design and Execution a System for Overall Security on Border Line from Invasion | Intellegent Technologies for Sustainable Energy in Management and Control (ITSEMC), YCCE Nagpur, OCT-23 | SCOPUS | ||
| 132. | Dr. P.D. Kamble | Taguchi Design of Experiment to optimize Material Removal rate in Turning AISI 4340 steel | International Confeence on Advances in Mechanical Engineering, 22-23 Dec 2023 | SCOPUS | ||
| 133. | Prof D.N. Kashyap | Development of Low cost CNC Router for wood working Industry | International Conference on Advances in Mechanical Engineering 2023,Organised by G.H.Raisoni ,Nagpur, Dec-23 | SCOPUS | ||
| 134. | Prof. A.B. Amale | Real-Time Analytics with Big Data and Streaming Computation | International Conference on Power Energy, Environment & Intelligent Control (PEEIC), IEEE Explore, March 2023 | SCOPUS | ||
| 135. | Prof R G Bodkhe | Performance Evaluation of passive direct liquid ethanol polymer electrolyte membrane fuel cell | 2nd International Conference on trend in material science and manufacturing Engineering (ICTMSME-2024) organized Innovative Scientific Research Association, India, 6-7 April 2024 | SCOPUS | ||
| 136. | Prof. A. P. Edlabadkar | Empirical Exploration of Optimal Gating System Design for Sand Casting Process | International Conference on Recent Advances in Mechanical Engineering and Nanomaterials TECHNOLOGIA: ICRAMEN 2024, held on 16-17 March 2024 | SCOPUS | ||
| 137. | Prof. A. P. Edlabadkar | Rolling Process Analysis of Working Rollers of Cold Rolling Mill Based on ANSYS | International Conference on Recent Advances in Mechanical Engineering and Nanomaterials TECHNOLOGIA: ICRAMEN 2024, held on 16-17 March 2024 | SCOPUS | ||
| 138. | Prof. Rakesh Adkane | Dsign and fabrication Commode cleaning machine | International Conference on Technologies Innovations and Applications in industry 4.0 (ICTIA 2024) by St. Vincent pallottie COE, 24-25 April 2024 | SCOPUS | ||
| 139. | Prof. G.H. Waghmare | Revolutionizing Healthcare: A Review of Applications of Additive Manufacturing in Dentistry | First International Conference on Advances in Multi-Material Manufacturing, Karunya Nagar, Coimbatore. 3-4 April 2024 | SCOPUS | ||
| 140. | Prof. M.S. Tufail | Design of Special Purpose Hydraulic Forging Press for 15000 Tons Capacity | Advances in Manufacturing, Automation, Design and Energy Technologies pp 631–640 Lecture Notes in Mechanical Engineering, Springer | Book Chapter | ||
| 141. | Prof. Neeraj Sunheriya | Buckling Analysis of Piston Rod for Hydraulic Cylinder of cotton Bale Press Machine | Advances in Engineering Design, Lecture Notes in Mechanical Engineering, Springer | Book Chapter |
| Sr. No. | Name of the Author(s) | Title of the Paper | Name of the Journal | Publisher | DOI | Index |
| 1. | Gurjeet Singh, Hongwei Wu | Effect of Different Inlet/Outlet Port Configurations on the Thermal Management of Prismatic Li-Ion Batteries | ASME Journal of Heat and Mass Transfer, | ASME | https://doi.org/10.1115/1.4055340 | SCI |
| 2. | P. S. Barve | Application of ANN modelling for optimisation of surface quality and kerf taper angle in abrasive water jet machining of AISI 1018 steel | Advances in Materials and Processing Technologies (Journal) | Taylor and Francis | https://doi.org/10.1080/2374068X.2022.2096830 | Scopus |
| 3. | S. P. Ambade, Ravinder Kataria, C.K.Tembhurkar, Santosh Gupta | Experimental and finite element analysis of temperature distribution in 409 M ferritic stainless steel by TIG, MIG and SMAW welding processes | Advances in Materials and Processing Technologies | Taylor and Francis | https://doi.org/10.1080/2374068X.2022.2100127 | Scopus |
| 4. | Prashant D. Kamble, Ketan Fulzele, Nikhil Shahare, Ritik Rane, Shilpa B. Sahare and YashikaGaidhani | Automated Sanitizing Machine for Recording Thermal Detection and Hygiene Application | IOP Conf. Series: Materials Science and Engineering | IOP | doi:10.1088/1757-899X/1259/1/012037 | Scopus |
| 5. | Chetan Mahatme, Jayant Giri | Error Minimization in Pre-surgical Model of Brain Tumor for 3-D Printing | Institute of Engineer C series | Springer | https://doi.org/10.1007/s40032-022-00894-w | Scopus |
| 6. | Mahatme C., Giri, J., Chadge, R., Bhagat, A. | Comparative analysis of different lattice topologies for cellular structure optimization in additive manufacturing | Materials Today | Elsevier | https://doi.org/10.1016/j.matpr.2022.03.280 | Scopus |
| 7. | A.H. Pundkar, Chaudhari, S.S. | Performance parameters enhancement with application of nanotechnology to MTR refrigeration system | Materials Today | Elsevier | https://doi.org/10.1016/j.matpr.2022.09.087 | Scopus |
| 8. | Chaudhari, S.S., S.N. Aloni | Optimization of green sand process for quality improvement in castings by using combination of Taguchi Techniques-GRA-PCA | Materials Today | Elsevier | https://doi.org/10.1016/j.matpr.2022.04.322 | Scopus |
| 9. | N. P. Mungle, N.,Waghmare, S. N., Shelare, | Structural design and its analysis of two station notching tool for industrial die | Materials Today: Proceedings | Elsevier | https://doi.org/10.1016/j.matpr.2022.06.360 | Scopus |
| 10. | Jayant Giri, Hamad A. Al-Lohedan, Faruq Mohammad, Ahmed A. Soleiman, Rajkumar Chadge, Chetan Mahatme, Neeraj Sunheriya, Pallavi Giri, Dhananjay Mutyarapwar and Shreya Dhapke | A Comparative Study on Predication of Appropriate Mechanical Ventilation Mode through Machine Learning Approach | Bioengineering | MDPI | https://doi.org/10.3390/bioengineering10040418 | SCI |
| 11. | Rajesh G. Bodkhe, Rakesh L. Shrivastava , Vinod Kumar Soni, Rajkumar B. Chadge | A review of renewable hydrogen generation and proton exchange membrane fuel cell technology for sustainable energy development | International Journal of Electrochemical Science | Elsevier | https://doi.org/10.1016/j.ijoes.2023.100108 | SCI |
| 12. | Neeraj Sunheriya, Satish Kumar Dewangan, Sanjeev B. Thool | Experimental and computational analysis of riser tubes of modified simple solar water heater with different twisted inserts | International Journal on Interactive Design and Manufacturing (IJIDeM) | Springer | https://doi.org/10.1007/s12008-023-01233-8 | ESCI, Scopus |
| 13. | SachinAmbade, Faraz Khan, Atharva Dahikar, Yash Bhonde, Sagar Shelare, Chetan Tembhurkar, DiweshMeshram | Dissimilar welding of austenitic SS and ferritic SS in last decades | Materials Today Proceedings | Elsevier | https://doi.org/10.1016/j.matpr.2023.04.533 | SCOPUS |
| 14 | Neeraj Sunheriya; Sachin G Mahakalkar; Rajkumar B. Chadge; Pratik Lande; Jayant P Giri; AshuoshBagde | Experimental analysis of twin blade contra-rotating wind turbine | IEEE Xplore | IEEE | doi: 10.1109/ICETEMS56252.2022.10093565 | SCOPUS |
| 15 | Chetan Mahatme; Jayant Giri; Rajkumar Chadge; Punit Fulzele | Brain Tumor Segmentation and Model Optimization for 3-D Printing | IEEE Xplore | IEEE | doi: 10.1109/ICETEMS56252.2022.10093365 | SCOPUS |
SN | Name of Authors | Title of Paper | Conference | DOI |
1. | Dr. J.P. Giri | Black-Winged Kite Algorithm Enhanced Physics | 2025 7th International Conference on Inventive Material Science and Applications (ICIMA) | DOI: 10.1109/ICIMA64861.2025.11073941 |
2. | Dr. J.P. Giri | Classification and Optimization of Liver Cancer Detection using Capsule-Vectored Neural Network with Artificial Jelly Optimization | 2025 3rd International Conference on Data Science and Information System (ICDSIS) | DOI: 10.1109/ICDSIS65355.2025.11070423 |
3. | Dr. J.P. Giri | Enhancing Voltage Control in Smart Microgrids for | 2025 7th International Conference on Inventive Material Science and Applications (ICIMA) | DOI: 10.1109/ICIMA64861.2025.11074022 |
4. | Dr. J.P. Giri | Neural Architecture Search Guided Physics | 2025 7th International Conference on Inventive Material Science and Applications (ICIMA) | DOI: 10.1109/ICIMA64861.2025.11073918 |
5. | Dr. R.B. Chadge | Advanced AI Algorithms for Fraud Detection: | 2025 Global Conference in Emerging Technology (GINOTECH) | DOI: 10.1109/GINOTECH63460.2025.11077050 |
6. | Dr. R.B. Chadge | Crested Porcupine Optimizer for Enhanced Power | 2025 7th International Conference on Inventive Material Science and Applications (ICIMA) | DOI: 10.1109/ICIMA64861.2025.11074177 |
7. | Dr. R.B. Chadge | Energy Management in PV Powered Electric | 7th International Conference on Inventive Material Science and Applications (ICIMA-2025) | DOI:10.1109/ICIMA64861.2025.11074171 |
8. | Dr. R.B. Chadge | Optimized Energy-Efficient Speed Control in | 2025 7th International Conference on Inventive Material Science and Applications (ICIMA) | DOI: 10.1109/ICIMA64861.2025.11073910 |
9. | Dr. R.B. Chadge | Enhancing Sigmoid Colon Cancer Diagnosis: | 2025 3rd International Conference on Self Sustainable Artificial Intelligence Systems (ICSSAS) | DOI: 10.1109/ICSSAS66150.2025.11081050 |
10. | Dr. R.B. Chadge | Spider Wasp Optimization-based Power | 2025 7th International Conference on Inventive Material Science and Applications (ICIMA) | DOI: 10.1109/ICIMA64861.2025.11074141 |
11. | Dr. J.P. Giri | Effective Cloud Computing Architectures for | 2025 International Conference on Networks and Cryptology (NETCRYPT) | 10.1109/NETCRYPT65877.2025.11102588 |
12. | Dr. J.P. Giri | Optimized Solar PV Forecasting and Battery SoC | 2025 7th International Conference on Inventive Material Science and Applications (ICIMA) | DOI: 10.1109/ICIMA64861.2025.11074016 |
13. | Dr. J.P. Giri | Red Panda Optimization Technique for Voltage | International Conference on Machine Learning and Autonomous Systems (ICMLAS-2025) | DOI:10.1002/est2.70251 |
14. | Dr. J.P. Giri | Effective Cloud Computing Architectures for | 2025 International Conference on Networks and Cryptology, NETCRYPT 2025 | DOI: 10.1109/NETCRYPT65877.2025.11102588 |
15. | Dr. R.B. Chadge | Blockchain-Based Identity Solutions for Privacy | 2025 6th International Conference for Emerging Technology (INCET) | DOI: 10.1109/INCET64471.2025.11140994 |
16. | Dr. R.B. Chadge | Energy-Efficient VLSI Architectures for On-Device | 2025 6th International Conference on Data Intelligence and Cognitive Informatics (ICDICI) | DOI: 10.1109/ICDICI66477.2025.11134936 |
17. | Dr. J.P. Giri | Effective Cloud Computing Architectures for | 2025 International Conference on Networks and Cryptology, NETCRYPT 2025 | DOI: 10.1109/NETCRYPT65877.2025.11102588 |
18. | Dr. J.P. Giri | Energy Harvesting and Smart Wireless Home | International Conference on Electronics and Renewable Systems (ICEARS 2025) | DOI:10.1109/ICEARS64219.2025.10941499 |
| Sr. No. | Name of the Teacher | Title of the Book published | Title of the Chapter published | Year |
| 1 | Dr. J.P. Giri | Proceedings of 2nd International Conference on Communication, Computing and Networking. Lecture Notes in Networks and Systems, vol 46. Springer, Singapore | The Effect of Various Parameters on the Nozzle Diameter and 3D Printed Product in Fused Deposition Modelling: An Approach | 2nd International Conference on Communication, Computing and Networking, 2019 |
| 2 | Dr. S.S. Chaudhari | Proceeding – 1st International Conference on Innovative Trends and Advances in Engineering and Technology, ICITAET 2019 | Review on design and heat transfer analysis of solid and perforated fins for the enhancement of thermal performance of heat sinks | ICITAET 2019 |
| 3 | Prof. Neeraj Sunheriya | Advances in Applied Mechanical Engineering: Select Proceedings of ICAMER 2019 (Lecture Notes in Mechanical Engineering) | Design, Development and Analysis of Intake Manifold of Single-Cylinder Diesel Engine | ICAMER 2019 |
| 4 | Dr.R.BChadge | New Paradigm of Industry 4.0, Springer | Role of Industry 4.0 in Performance Improvement of Furniture Cluster | 2020 |
| 5 | Dr. S.P. Ambade | Advances in Materials Processing, Springer | Transient Analysis of GTA-Welded Austenitic and Ferritic Stainless Steel | 23-June 2020 |
| 6 | Dr. S. P. Ambade | Optimization in Industrial and Manufacturing Systems and Applications, Springer | A Critical Review on Dissimilar Joining of ASS and FSS | CIMS-2020 |
| 7 | Dr. S.R. Jachak | Smart Technologies for Energy, Environment and Sustainable Development, Vol 1 | Performance Evaluation of Adhesive Bonded Tools Using Design of Experiments | ICSTEESD 2020 |
| 8 | Prof. Y.Y. Nandurkar | Smart Technologies for Energy, Environment and Sustainable CDevelopment, Vol 2 | Efficiency Improvement of Concentrated Photovoltaic (CPV) System by Way of Various Active and Passive Cooling Techniques—A Review | ICSTEESD 2020 |
| 9 | Dr. S.S. Chaudhari | Lecture Notes in Mechanical Engineering, Springer | Performance Improvement of Nanofluid Minimum Quantity Lubrication (Nanofluid MQL) Technique in Surface Grinding by Optimization Using Jaya Algorithm | 2020 |
| 10 | Dr. S.S. Chaudhari | Advances in Intelligent Systems and Computing | Optimization of Nanofluid Minimum Quantity Lubrication (NanoMQL) Technique for Grinding Performance Using Jaya Algorithm | 2020 |
| 11 | Prof. D.Y. Shahare | Proceedings of International Conference in Mechanical and Energy Technology | Investigating Heat Treatment Process for Shear Failed Traction Pinion Supported Using FEA | 2020 |
| 12 | Prof. N.J. GIRADKAR | Technology Innovation in Mechanical Engineering | Formulation of Empirical Correlation for Heat Transfer Coefficient, for Gases, in Terms of Fluid Properties, Tube Diameter and Mass Velocity; for Forced Convection Through Tubes. | TIME 2021 |
| 13 | Prof. V M KORDE | Advances in Mechanical Engineering and Technology | Design and Performance of Plate-Fin Heat Exchanger: A Brief Review | ICAPIE – 2021 |
| 14 | Prof. Dipti N. Kashyap | Recent Advances in Manufacturing Modelling and Optimization | Electrically Operated Hygiene Bin to Simplify the Initial Stage of Diaper Composting | RAM 2021 |
| 15 | Dr. J.P. Giri | Transformation in Healthcare with Emerging Technologies | Machine Learning for Designing a Mechanical Ventilator: An Approach | – |
| 16 | Dr. J.P. Giri | Bentham Science Book Series (Scopus Indexed) | Radial Basis Function Neural Network for prediction of Mechanical Properties for Fused Deposition Method | AIE2021, Delhi Technical Campus, Greater Noida, India |
| 17 | Chadge, R.B., Sunheriya, N., Mahatme, C., Giri, J.P. | Lecture Notes in Mechanical Engineering, Springer | Experimental and Numerical Investigation of Flat Plate Solar Water Heater | 2021 |
| 18 | Dr. S.P. Ambade | 1st Edition Evolutionary Optimization of Material Removal Processes | Application of ANN and Taguchi technique for material removal rate by Abrasive Jet Machining with special abrasive materials | 2022 |
| 19 | Dr. Sandip S. Khedkar | 1st Edition Recent Advances in Materials, Manufacturing and Machine Learning | Design And Development of Bull Operated Mulching Machine Suitable for Small Scale Farmers in India (https://doi.org/10.1201/9781003358596-80) | RAMMML-2022, YCCE |
| 20 | Dr. S. T. Bagde | 1st Edition Recent Advances in Materials, Manufacturing and Machine Learning | Development of Low Cost Deburring Setup with Feedback Capability (https://doi.org/10.1201/9781003370628-32) | RAMMML-2022, YCCE |
| 21 | Dr. V. R. Khawale | 1st Edition Recent Advances in Materials, Manufacturing and Machine Learning | Study and analysis of various characteristics of innovative Solar Crop Dryer (https://doi.org/10.1201/9781003370628-3) | RAMMML-2022, YCCE |
| 22 | Narendra J Giradkar | 1st Edition Recent Advances in Materials, Manufacturing and Machine Learning | FLUID-PARTICLE HEAT TRANSFER IN FLUIDIZED AND FIXED BEDS (https://doi.org/10.1201/9781003370628-63) | RAMMML-2022, YCCE |
| 23 | Dr. S. S Chaudhari | 1st Edition Recent Advances in Materials, Manufacturing and Machine Learning | Optimum Sprue design and analysis using InspireCast for performance Improvement in Casting Process (https://doi.org/10.1201/9781003370628-64) | RAMMML-2022, YCCE |
| 24 | Prof. Narendra J Giradkar | 1st Edition Recent Advances in Materials, Manufacturing and Machine Learning | IRRELEVANCE OF DIMENSIONAL APPROACH AS APPLIED TO FORMULATE EQUATIONS IN CONVECTIVE HEAT TRANSFER (https://doi.org/10.1201/9781003370628-48) | RAMMML-2022, YCCE |
| 25 | Prof. Ashvin amale | 1st Edition Recent Advances in Materials, Manufacturing and Machine Learning | Experimental and Numerical Analysis of Jet Impingement Heating on Cylindrical Body (https://doi.org/10.1201/9781003358596-81) | RAMMML-2022, YCCE |
| 26 | Dr. Jayant Giri | 1st Edition Recent Advances in Materials, Manufacturing and Machine Learning | A Comparative Study of a Plane NACA2412 Airfoil with a NACA2412 Airfoil attached with Gurney Flap using CFD (https://doi.org/10.1201/9781003370628-74) | RAMMML-2022, YCCE |
| 27 | Dr. Jayant Giri | 1st Edition Recent Advances in Materials, Manufacturing and Machine Learning | Public acceptance of drones : An approach (https://doi.org/10.1201/9781003358596-55) | RAMMML-2022, YCCE |
| 28 | Dr. Girish M. Dhote | 1st Edition Recent Advances in Materials, Manufacturing and Machine Learning | Optimum Solution of Goal Programming Problem by Modified Charnes Penalty Method | RAMMML-2022, YCCE |
| 29 | Prof. Ajay Bonde | 1st Edition Recent Advances in Materials, Manufacturing and Machine Learning | Optimization of Process Parameters of CNC Milling: An Approach | RAMMML-2022, YCCE |
| 30 | Prof. Ajay Bonde | 1st Edition Recent Advances in Materials, Manufacturing and Machine Learning | Application of Value Stream Mapping for effective implementation of the Lean system in the small scale industry | RAMMML-2022, YCCE |
| 31 | Prof. V.M. Korde | 1st Edition Recent Advances in Materials, Manufacturing and Machine Learning | FLUIDIZED BED DRYER FOR AGRICULTURAL PRODUCTS: AN APPROCH (https://doi.org/10.1201/9781003358596-59) | RAMMML-2022, YCCE |
| 32 | Prof. N.R. Sunheriya | 1st Edition Recent Advances in Materials, Manufacturing and Machine Learning | CFD analysis of vortex tube using multiple nozzles (https://doi.org/10.1201/9781003358596-16) | RAMMML-2022, YCCE |
| 33 | Dr. Prashant D. Kamble | 1st Edition Recent Advances in Materials, Manufacturing and Machine Learning | Prediction of Response Parameter for Turning AISI 4340 steel using Hybrid Taguchi-ANN Method (HTAM) (https://doi.org/10.1201/9781003358596-18) | RAMMML-2022, YCCE |
| 34 | Dr. Arun P. Kedar | 1st Edition Recent Advances in Materials, Manufacturing and Machine Learning | AHP Approach for Measuring Service Quality of Passenger Car (https://doi.org/10.1201/9781003370628-38) | RAMMML-2022, YCCE |
| 35 | Dr. S.P. Ambade | 1st Edition Recent Advances in Materials, Manufacturing and Machine Learning | Development and Analysis of Paperless SOPs and Travelcard for the Manufacturing Industry (https://doi.org/10.1201/9781003370628-60) | RAMMML-2022, YCCE |
| 36 | Dr. Arun Kedar, Dr. Rajkumar Chadge | 1st Edition Recent Advances in Materials, Manufacturing and Machine Learning | Case Study on Quality Circle Implementation at a Large Scale Manufacturing Unit (https://doi.org/10.1201/9781003370628-4) | RAMMML-2022, YCCE |
| 37 | Dr. S.P. Ambade | 1st Edition Recent Advances in Materials, Manufacturing and Machine Learning | Thyristor controlled LC (TCLC) Compensator for Current Harmonic Reduction (https://doi.org/10.1201/9781003370628-67) | RAMMML-2022, YCCE |
| 38 | Dr. Jayant Giri, Rajkumar Chadge | 1st Edition Recent Advances in Materials, Manufacturing and Machine Learning | Workflow of Conversion of CT Scan Dicom Image of Reconstructed Humerus Fracture to 3D Printable Model for Preoperative Usage with the help of Affordable Additive Manufacturing Process (https://doi.org/10.1201/9781003370628-25) | RAMMML-2022, YCCE |
| 39 | Dr.R.BChadge | 1st Edition Recent Advances in Materials, Manufacturing and Machine Learning | Application of Supply Chain Management in Iron And Steel Industries (https://doi.org/10.1201/9781003370628-16) | RAMMML-2022, YCCE |
| 40 | Prof. G. H. Waghmare | 1st Edition Recent Advances in Materials, Manufacturing and Machine Learning | Challenges and Recent Advances in Automated Plant Disease Recognition and Classification using Deep Learning and Machine Learning (https://doi.org/10.1201/9781003358596-56) | RAMMML-2022, YCCE |
| 41 | Dr. Jayant Giri, Rajkumar Chadge | 1st Edition Recent Advances in Materials, Manufacturing and Machine Learning | Application of Additive Manufacturing in Orbital-Bone Fracture Reconstruction Surgery (https://doi.org/10.1201/9781003358596-15) | RAMMML-2022, YCCE |
| 42 | Prof. Vivek M. Korde | Advances in Manufacturing Technology and Management, Lecture Notes in Mechanical Engineering book series (LNME) | Design and Optimization of an Evaporative Condenser: A Detailed Review | Nov. 2022 |
| 43 | Prof. P.N. Shende | Advances in Manufacturing Engineering | Implementation of ISO 9001 in the Manufacturing Industry, a Literature Review. | ICFAMMT 2022 |
| 44 | Prof. Vivek M. Korde | Lecture Notes in Mechanical Engineering, Springer | Performance of an Evaporative Condenser: A Review | 2022 |
| 45 | Dr. S.S. Chaudhari | AIP Conference Proceeding | Comparative Review On Conventional And Recently Developed Perforated Fins For Heat Transfer Enhancement | 2022 |
| 46 | Dr. S.R. Jachak | Smart Technologies for Energy, Environment and Sustainable Development, Springer | Performance Evaluation of Adhesive Bonded Tools Using Design of Experiments | 2022 |
| 47 | Prof. P.A.Hatwalne | Recent Advances in Manufacturing Processes and Systems, Springer | Evaluating Torsional Properties of FDM Components for Various Layer Heights | 2022 |
| 48 | Prof. G.H. Waghmare | Advances in Sustainability Science and Technology book series (ASST), Springer | Design and Development of Universal Runner Cutting Machine | 2022 |
Faculty Publication Details (Book)- 2025-26
SN | Name of Authors | Title of Paper | Book Chapter | DOI |
1 | Dilip I. Sangotra | Digital innovation in higher educational system: Application of information and communication technology | AI Powered Educational Games and SimulationsOpen source preview, 2025, pp. 367–389, | DOI: 10.4018/979-8-3373-0035-1.ch011 |
2 | M. S. Tufail, Jayant Giri | Parametric Optimization of Electric | Studies in Systems, Decision and Control, Artificial | DOI:10.1007/978-3-031-89771-9_1 |
3 | Nikhil Janardan Rathod, B. M. Praveen, Santosh N. Shelke, Khaled Al-Qawasmi, Neeraj Sunheriya, Jayant Giri , and Rajkumar Chadge | SS304 CNC Turning Process | Studies in Systems, Decision and Control, Artificial | DOI:10.1007/978-3-031-89771-9_2 |
4 | Amit R. Bhende, Jayant Giri | Structural Health Monitoring | Studies in Systems, Decision and Control, Artificial | DOI:10.1007/978-3-031-89771-9_3 |
5 | Hnnie Williams, Bhausaheb B. Musmade, Jayant Giri | Two-Stage Composite Sliding Mode | Studies in Systems, Decision and Control, Artificial | DOI:10.1007/978-3-031-89771-9_4 |
6 | Sachin T. Bagde, Rajkumar B. Chadge, Jayant Giri | Experimental Investigation of Shading | Studies in Systems, Decision and Control, Artificial | DOI:10.1007/978-3-031-89771-9_5 |
7 | Nikhil J. Rathod, Pankaj Bonde, Hemant R. Nehete, Khaled al-Qawasmi, | Wire Electrical Discharge Machining | Studies in Systems, Decision and Control, Artificial | DOI:10.1007/978-3-031-89771-9_6 |
8 | Sharad S. Chaudhari, Om K. Urkande, Jayant Giri | History, Progress, and Future | Studies in Systems, Decision and Control, Artificial | DOI:10.1007/978-3-031-89771-9_7 |
9 | Nikhil J. Rathod, Pankaj Bonde, Hemant R. Nehete, Hayel Khafajeh, | Optimizing Wire Electric Discharge | Studies in Systems, Decision and Control, Artificial | DOI:10.1007/978-3-031-89771-9_8 |
10 | Kirana, Inderpal Singh, Arun Kumar Rana, Hamzeh Aljawawdeh, | Melanoma Skin Cancer Classification Using Deep Learning Architecture | Studies in Systems, Decision and Control, Artificial | DOI:10.1007/978-3-031-89771-9_9 |
11 | Saurabh Sarkar, Neeraj Sunheriya, Jayant Giri | A Comprehensive Quantitative Model for Ethical AI Risk Assessment: EU Act | Studies in Systems, Decision and Control, Artificial | DOI:10.1007/978-3-031-89771-9_10 |
12 | Dsouza Prima Frederick, Arlene Shalma Fernandes, | Comparative Analysis of Online Food Delivery Services: Ahp-Topsis Model for Customer Service Quality | Studies in Systems, Decision and Control, Artificial | DOI:10.1007/978-3-031-89771-9_11 |
13 | Harshvardhan P. Ghongade, Anjali A. Bhadre, Raghavendra R. Barshikar, | Geospatial Data Analytics for Urban Planning and Infrastructure Development | Studies in Systems, Decision and Control, Artificial | DOI:10.1007/978-3-031-89771-9_12 |
14 | Dsouza Prima Frederick, Amith Donald Menezes, Reema Agnes Frank, | Examining Gender-Based Preferences and Satisfaction in Online Food Delivery | Studies in Systems, Decision and Control, Artificial | DOI:10.1007/978-3-031-89771-9_13 |
15 | Surendrakumar Nagpure, Neeraj Sunheriya, Jayant Giri, | Analysis of a Baffle Plate in Cylindrical Vessel to Reduce the Pressure Effect During Sloshing | Studies in Systems, Decision and Control, Artificial | DOI:10.1007/978-3-031-89771-9_14 |
16 | El-Manaseer, Ali Awwad Aljabrah, Omar Almakhzoumi, | The Recent Provisions Governing | Studies in Systems, Decision and Control, Artificial | DOI:10.1007/978-3-031-89771-9_15 |
17 | Nikhil J. Rathod, Harshvardhan Prabhakar Ghongade, Anjali Ashokrao Bhadre, Hayel Khafajeh, Jayant Giri, Neeraj Sunheriya, | Aluminum Machining Process Parameter Optimization in WEDM with the GRA Approach | Studies in Systems, Decision and Control, Artificial | DOI:10.1007/978-3-031-89771-9_16 |
18 | Kirti Kashyap, Vijay Kumar Sharma, Kulwinder Singh, Mahmoud Odeh, | Study of the effect of nano-based | Studies in Systems, Decision and Control, Artificial | DOI:10.1007/978-3-031-89771-9_18 |
19 | Vijay Kumar Sharma, Ashutosh Sharma, Jayant Giri, | Innovative Technological Advancements Shaping the Future of Smart Manufacturing: A Comprehensive Review | Studies in Systems, Decision and Control, Artificial | DOI:10.1007/978-3-031-89771-9_20 |
20 | Rishabh Niranjan, S. K. Kulkarni, Neeraj Sunheriya, | Lateral Torsional Buckling of Castellated Steel Beam with Tapered Web | Studies in Systems, Decision and Control, Artificial | DOI:10.1007/978-3-031-89771-9_22 |
21 | Priya, Inderpal Singh, Arun Kumar Rana, Mohammad Rasmi Al-Mousa, | Combustion and Error Analysis | Studies in Systems, Decision and Control, Artificial | DOI:10.1007/978-3-031-89771-9_24 |
22 | Shilpa Jagtap, Swati Aswale, Jayant Giri and Khaled Alqawasmi | A Comprehensive Survey of Stress | Studies in Systems, Decision and Control, Artificial | DOI:10.1007/978-3-031-89771-9_26 |
23 | Priya, Inderpal Singh, Arun Kumar Rana, Mohammad Rasmi Al-Mousa, | Interim Check Process Digital Twin | Studies in Systems, Decision and Control, Artificial | DOI:10.1007/978-3-031-89771-9_28 |
24 | P. Satishkumar, Rajasekaran Saminathan, Rajendra Kumar Patel, | Biomimetic Materials: Innovations | Studies in Systems, Decision and Control, Artificial | DOI:10.1007/978-3-031-89771-9_30 |
25 | Amrutha N. Daivagna, Sujit Kumar, Kavana Salimath, | Artificial Intelligence-Based Smart | Studies in Systems, Decision and Control, Artificial | DOI:10.1007/978-3-031-89771-9_32 |
26 | Nidhi Chahal, Arun Kumar, Simarpreet Kaur, Khaled Al-Qawasmi, Preeti Bansal, Shresth Modi, and Jayant Gir | A Systematic Visualization and Evolution | Studies in Systems, Decision and Control, Artificial | DOI:10.1007/978-3-031-89771-9_34 |
27 | Nidhi Chahal, Arun Kumar, Aryan Srivastava, | Printing Life: Exploring the Intersection | Studies in Systems, Decision and Control, Artificial | DOI:10.1007/978-3-031-89771-9_36 |
28 | Arun Kumar Rana, Priya Trivedi, Jayant Giri, Ahmad Abdelhafiz Ali Samhan, and Rajkumar Chadge | Innovative Approaches to Integrating Artificial Intelligence for Sustainable Agricultural Practices: Shaping a Greener Future | Studies in Systems, Decision and Control, Artificial | DOI:10.1007/978-3-031-89771-9_38 |
29 | Sandeep Singh, Amandeep Kaur, Yogendra Kumar, Safeyah Tawil, | Advanced Machine Learning Techniques for Fault Detection in Electrical Power Systems | Studies in Systems, Decision and Control, Artificial | DOI:10.1007/978-3-031-89771-9_40DOI:10.1007/978-3-031-89771-9_40 |
30 | Nilam Choudhary, Vivek Arya, Arun Kumar Rana, | Journey of Cloud, Opportunity | Studies in Systems, Decision and Control, Artificial | DOI:10.1007/978-3-031-89771-9_40DOI:10.1007/978-3-031-89771-9_42 |
31 | D. Ravindran, Arun Rana, Jayant Giri , Mohammad Omar Sabri, S. Raja, K. Janakipriya, V. Rajalakshmi, Mandeep Kaur, and Rajkumar Chadge | The Impact of AI and Machine Learning on Decision-Making Processes: Enhancing Organizational Agility and Competitive Advantage | Studies in Systems, Decision and Control, Artificial | DOI:10.1007/978-3-031-89771-9_44 |
32 | Sandeep Singh, Deeksha Verma, Yogendra Kumar, Raed Alazaidah, Mumtaz Raed AlHommada, Nilesh Bhosle, Ahmad Alkhayyat, | Design and Optimization of Wireless Power Transfer Systems for Enhanced Industrial Automation | Studies in Systems, Decision and Control, Artificial | DOI:10.1007/978-3-031-89771-9_46 |
33 | Raman Kumar, Amrita Singh, Arti Badhoutiya, Raed Alazaidah, Huda Qasim Owaied, Abhilasha Jadhav, Muntather Almusawi, | Energy-Efficient Strategies for Power Electronics in Next-Generation Electric Vehicles | Studies in Systems, Decision and Control, Artificial | DOI:10.1007/978-3-031-89771-9_48 |
34 | Jasgurpreet Singh Chohan, Jatinder Kumar, Krishna Kant Dixit, Safeyah Tawil, Dalal kadim Sakr, Nilesh Bhosle, Mohammed Al-Farouni, | Implementation of Quantum Computing Algorithms in Electrical PowerSystem Optimization | Studies in Systems, Decision and Control, Artificial | DOI:10.1007/978-3-031-89771-9_50 |
35 | Jasgurpreet Singh Chohan, Jaspreet Kaur, Krishna Kant Dixit, Raed Alazaidah, Dalal Kadim Sakr, Jayant Jagtap, Mohammed Al-Farouni, | Innovations in High-Voltage Direct | Studies in Systems, Decision and Control, Artificial | DOI:10.1007/978-3-031-89771-9_52 |
36 | Raman Kumar, Heena Madan, Arti Badhoutiya, Raed Alazaidah, Huda Qasim Owaied, Ashish Singh, Muntather Almusawi, Arun Kumar, and Jayant Giri | Integrating Distributed Renewable | Studies in Systems, Decision and Control, Artificial | DOI:10.1007/978-3-031-89771-9_54 |
37 | Priya, Inderpal Singh, Arun Kumar Rana, Mohammad Rasmi Al-Mousa, | Bio Inspired Approach for Cluster Head | Studies in Systems, Decision and Control, Artificial | DOI:10.1007/978-3-031-89771-9_56 |
38 | Kapil Bhardwaj, Kamal Kant Sharma, Arun Rana, | Applications of Three-Dimensional | Studies in Systems, Decision and Control, Artificial | DOI:10.1007/978-3-031-89771-9_58 |
39 | J. R. Deepak, S. Karthick Raja, J. Sabeer Khan, Khaled Al-Qawasmi, | Garbage Compactor with IOT Based | Studies in Systems, Decision and Control, Artificial | DOI:10.1007/978-3-031-89771-9_60 |
40 | J. R. Deepak, R. Krithika, N. Sathya Prakash, | Portable Active Infrared Thermography: | Studies in Systems, Decision and Control, Artificial | DOI:10.1007/978-3-031-89771-9_62 |
41 | J. R. Deepak, S. Riswanth, Y. A. Devaragothaman, Safeyah Tawil, M. Anish, and Jayant Giri | Machine Learning-Driven Portable | Studies in Systems, Decision and Control, Artificial | DOI:10.1007/978-3-031-89771-9_64 |
42 | Manju Rani, Naveen Kumar, Arun Kumar Rana, Safeyah Tawil, | An Efficient Hybrid Backstepping | Studies in Systems, Decision and Control, Artificial | DOI:10.1007/978-3-031-89771-9_66 |
43 | Arlene Shalma Fernandes, Dsouza Prima Frederick, Shipra Kumari, | Emerging Trend in the Advancement | Studies in Systems, Decision and Control, Artificial | DOI:10.1007/978-3-031-89771-9_68 |
44 | Dsouza Prima Frederick, Arlene Shalma Fernandes, Reema Agnes Frank, | Multi-criteria Decision Analysis for Food | Studies in Systems, Decision and Control, Artificial | DOI:10.1007/978-3-031-89771-9_70 |
45 | Dungar Singh, Abdullah Ahmad, Jayant Giri and Rajkumar Chadge , Mohammad Omar Sabri,and Rajkumar Chadge | Study on Passenger Car Units | Studies in Systems, Decision and Control, Artificial | DOI:10.1007/978-3-031-89771-9_72 |
46 | Dungar Singh, Ankit Sahu, Jayant Giri | Evaluation of Vulnerable Road User | Studies in Systems, Decision and Control, Artificial | DOI:10.1007/978-3-031-89771-9_74 |
47 | Dsouza Prima Frederick, Arlene Shalma Fernandes, Shivani Agarwal, | Accelerating Innovation: The Role | Studies in Systems, Decision and Control, Artificial | DOI:10.1007/978-3-031-89771-9_76 |
48 | Dsouza Prima Frederick, Arlene Shalma Fernandes, Manoj Kumar, | Important Performance Matrix Analysis | Studies in Systems, Decision and Control, Artificial | DOI:10.1007/978-3-031-89771-9_78 |
49 | M. A. Prasanth, S. Prathap Singh, Jayant Giri | Synthesis and Characterization | Studies in Systems, Decision and Control, Artificial | DOI:10.1007/978-3-031-89771-9_80 |
50 | M. C. Jobin Christ, Arjun Bhattacharya, Safeyah Tawil, and Jayant Giri | A Novel Four-Step Approach | Studies in Systems, Decision and Control, Artificial | DOI:10.1007/978-3-031-89771-9_82 |
51 | E. Karuppathal, T. Rubesh Kumar, B. Sarayu Pratika, Safeyah Tawil, | Arrhythmia on ECG Classification Using | Studies in Systems, Decision and Control, Artificial | DOI:10.1007/978-3-031-89771-9_84 |
52 | S. Rajkumar, V. A. Sairam, Samyuktha Kapoor, | Expert System for Breast Cancer | Studies in Systems, Decision and Control, Artificial | DOI:10.1007/978-3-031-89771-9_86 |
53 | M. C. Jobin Christ, Arjun Bhattacharya, R. Madhavan, | The Future of Robotics Surgeries: | Studies in Systems, Decision and Control, Artificial | DOI:10.1007/978-3-031-89771-9_88 |
54 | Krishnakumar Sankar, Ashwin Kumar Manickam Rajakavitha, | Impacts of Alzheimer’s Disease | Studies in Systems, Decision and Control, Artificial | DOI:10.1007/978-3-031-89771-9_90 |
55 | Krishnakumar Sankar | Dynamic Splint Treatment | Studies in Systems, Decision and Control, Artificial | DOI:10.1007/978-3-031-89771-9_92 |
56 | Krishnakumar Sankar, Mohammed Aasim Subairdeen, | Botulinum Neurotoxin Treatment | Studies in Systems, Decision and Control, Artificial | DOI:10.1007/978-3-031-89771-9_94 |
57 | Krishnakumar Sankar, Jobin Christ Michael Christudas, Jayant Giri | Investigating the Effects of Build | Studies in Systems, Decision and Control, Artificial | DOI:10.1007/978-3-031-89771-9_96 |
58 | S. Krishnakumar, M. C. Jobin Christ, Jayant Giri | Influence of Enslaving Effects | Studies in Systems, Decision and Control, Artificial | DOI:10.1007/978-3-031-89771-9_98 |
59 | Krishnakumar Sankar, N. V. Dhaanush, Jayant Giri | MED IoT—A Live Patient Monitoring | Studies in Systems, Decision and Control, Artificial | DOI:10.1007/978-3-031-89771-9_100 |
60 | M. C. Jobin Christ, V. Deepalakshmi, K. S. Keerthana, | Skin Interfaced Patch for Measuring | Studies in Systems, Decision and Control, Artificial | DOI:10.1007/978-3-031-89771-9_102 |
61 | Swati Singh, Pummy Dhiman, Anupam Bonkra, | AI and Augmented Reality: | Studies in Systems, Decision and Control, Artificial | DOI:10.1007/978-3-031-89771-9_104 |
62 | Vishnu T. Mhaske, Avinash Somatkar, Shivshankar P. Trikal, | Cryogenic Investigation of Surface Roughness and Material Removal Rate of 52100 Bearing Steel in Comparison with Dry Machining | Studies in Systems, Decision and Control, Artificial | DOI:10.1007/978-3-031-89771-9_106 |
63 | Avinash Somatkar, Yash Khandarkar, Abhijeet Deshpande, | Evaluating Acetylene Fuel | Studies in Systems, Decision and Control, Artificial | DOI:10.1007/978-3-031-89771-9_108 |
64 | Saurabh Vaidya, Sanjay Raut, Jayant Giri | Critical Study of Seismic Response | Studies in Systems, Decision and Control, Artificial | DOI:10.1007/978-3-031-89771-9_110 |
65 | Mahendra Gadge, Praveen Rathod, Satish Chinchanikar, | Investigating Chip Morphology | Studies in Systems, Decision and Control, Artificial | DOI:10.1007/978-3-031-89771-9_112 |
66 | Mahmoud Khalifa | Leveraging e-Government Platforms | Studies in Systems, Decision and Control, Artificial | DOI:10.1007/978-3-031-89771-9_114 |
67 | Sandeep Singh, Amandeep Kaur, Yogendra Kumar, Abdullah Alqammaz, | Advancements in Quantum Computing | Studies in Systems, Decision and Control, Artificial | DOI:10.1007/978-3-031-89771-9_116 |
68 | Ankush Santra, Mohit Lalit, Siddharth Kumar, Abdullah Alqammaz, | AI-Driven Predictive Analytics | Studies in Systems, Decision and Control, Artificial | DOI:10.1007/978-3-031-89771-9_117 |
69 | Shilpee Patil, Alka Verma, Anil Kumar Pandey, Abdullah Alqammaz, | Basics of Printed Antenna Design | Studies in Systems, Decision and Control, Artificial | DOI:10.1007/978-3-031-89771-9_118 |
70 | Anil Kumar Pandey, Shilpee Patil, Alka Verma, Abdullah Alqammaz, | Printed Antennas for 5G/IoT/Smart | Studies in Systems, Decision and Control, Artificial | DOI:10.1007/978-3-031-89771-9_119 |
71 | Raman Kumar, Amrita Singh, Arti Badhoutiya, Nabeel Al-Milli, | Design and Implementation | Studies in Systems, Decision and Control, Artificial | DOI:10.1007/978-3-031-89771-9_120 |
72 | Heena Dhiman, Gurpreet Singh, Arun Kumar Rana, Nabeel Al-Milli, | Smart Home Automation and Security | Studies in Systems, Decision and Control, Artificial | DOI:10.1007/978-3-031-89771-9_121 |
73 | Alka Verma, Shilpee Patil, Anil Kumar Pandey, Nabeel Al-Milli, | Exploring Machine Learning | Studies in Systems, Decision and Control, Artificial | DOI:10.1007/978-3-031-89771-9_122 |
74 | Nagula Sai Sathvik, Mohit Lalit, Alankrita Aggarwal | Emerging Industrial Technologies: AI | Studies in Systems, Decision and Control, Artificial | DOI:10.1007/978-3-031-89771-9_123 |
75 | N. T. Mary Rosana, K. L. Vincent Joseph, S. Rajkumar, Nabeel Al-Milli, | Advancements and Challenges | Studies in Systems, Decision and Control, Artificial | DOI:10.1007/978-3-031-89771-9_124 |
76 | R. Madhavan, M. C. Jobin Christ, R. Haripriya, Nabeel Al-Milli, V. Mythily, | Classification of Brain MRI Images | Studies in Systems, Decision and Control, Artificial | DOI:10.1007/978-3-031-89771-9_125 |
77 | K. L. Vincent Joseph, N. T. Mary Rosana, J. D. Jenifer Janet, | Photocatalytic Performance of Doped | Studies in Systems, Decision and Control, Artificial | DOI:10.1007/978-3-031-89771-9_126 |
78 | N. T. Mary Rosana, K. L. Vincent Joseph, M. Harshini, Nabeel Al-Milli, | Photonic Synergy: Integrating Natural | Studies in Systems, Decision and Control, Artificial | DOI:10.1007/978-3-031-89771-9_127 |
79 | K. L. Vincent Joseph, N. T. Mary Rosana, L. Motcha Rakkini, | Sustainable Approaches to Electronic | Studies in Systems, Decision and Control, Artificial | DOI:10.1007/978-3-031-89771-9_128 |
80 | K. L. Vincent Joseph, N. T. Mary Rosana, R. Rufe Adrin Rebecca, | Transforming Carbon Capture into High | Studies in Systems, Decision and Control, Artificial | DOI:10.1007/978-3-031-89771-9_129 |
81 | Kavindra Singh Dhami, T. R. Praveenkumar, P. J. Ramaraju, | Utilization of Concrete Waste as Partial | Studies in Systems, Decision and Control, Artificial | DOI:10.1007/978-3-031-89771-9_130 |
82 | T. R. Praveenkumar, Palapala Sagar Reddy, Kavindra Singh Dhami, Nabeel Al-Milli, K. K. Gupta, and Jayant Giri | Performance Analysis of Nano-TiO2, | Studies in Systems, Decision and Control, Artificial | DOI:10.1007/978-3-031-89771-9_131 |
83 | Kavindra Singh Dhami, T. R. Praveenkumar, P. J. Ramaraju, Hayel Khafajeh, and Jayant Giri | Enhancing Mechanical Properties | Studies in Systems, Decision and Control, Artificial | DOI:10.1007/978-3-031-89771-9_132 |
84 | T. A. Sudarshan, N. Nagabhushana, Ashok Kumar, Hayel Khafajeh, | Study the Effects of Fenugreek Biodiesel | Studies in Systems, Decision and Control, Artificial | DOI:10.1007/978-3-031-89771-9_133 |
85 | P. Eshanthini, H. A. R. Melvin Sandron, T. R. Praveenkumar, | Investigation on Self Compacting | Studies in Systems, Decision and Control, Artificial | DOI:10.1007/978-3-031-89771-9_134 |
86 | Amal Mondal, Abhijit Debnath, Kavindra Singh Dhami, Hayel Khafajeh, | Behaviour of Inclined Circular Pile | Studies in Systems, Decision and Control, Artificial | DOI:10.1007/978-3-031-89771-9_135 |
87 | Kavindra Singh Dhami, P. J. Rama Raju, Abhijit Debnath, Hayel Khafajeh, and Jayant Giri | Evaluating the Synergistic Effects | Studies in Systems, Decision and Control, Artificial | DOI:10.1007/978-3-031-89771-9_136 |
88 | Kavindra Singh Dhami, Praveenkumar T R., Abhijit Debnath, Hayel Khafajeh, and Jayant Giri | Synergistic Enhancement of Quaternary | Studies in Systems, Decision and Control, Artificial | DOI:10.1007/978-3-031-89771-9_137 |
89 | Aditi Yadav, P. J. Rama Raju, Akshay Saini, Hayel Khafajeh, Kavindra Singh Dhami, and Jayant Giri | Comparative Analysis of Curing | Studies in Systems, Decision and Control, Artificial | DOI:10.1007/978-3-031-89771-9_138 |
90 | D. Kaviraj, P. Eshanthini, T. R. Praveenkumar, Mohammad A. Hassan, K. K. Gupta, and Jayant Giri | Experimental Study on Flexural | Studies in Systems, Decision and Control, Artificial | DOI:10.1007/978-3-031-89771-9_139 |
91 | Kavindra Singh Dhami, Abhijit Debnath, Sushant Shekhar, | Evaluating Landslide Risk | Studies in Systems, Decision and Control, Artificial | DOI:10.1007/978-3-031-89771-9_140 |
92 | Kavindra Singh Dhami, T.R. Praveenkumar, Jayant Giri, | Advancing Sustainable Concrete Mortar: | Studies in Systems, Decision and Control, Artificial | DOI:10.1007/978-3-031-89771-9_141 |
93 | Kavindra Singh Dhami, T. R. Praveenkumar, Jayant Giri | Optimizing Mortar Sustainability | Studies in Systems, Decision and Control, Artificial | DOI:10.1007/978-3-031-89771-9_142 |
94 | Naresh Kumar Jothi, A. Lakshmi, Jayant Giri | An Examination of the Stability | Studies in Systems, Decision and Control, Artificial | DOI:10.1007/978-3-031-89771-9_143 |
95 | Naresh Kumar Jothi, A. Lakshmi, Jayant Giri | Mathematical Investigation | Studies in Systems, Decision and Control, Artificial | DOI:10.1007/978-3-031-89771-9_144 |
96 | Naresh Kumar Jothi, A. Lakshmi, Jayant Giri | HIV/AIDS Control and Stability Analysis | Studies in Systems, Decision and Control, Artificial | DOI:10.1007/978-3-031-89771-9_145 |
97 | Naresh Kumar Jothi, Anusha Muruganandham, Jayant Giri | A Volterra-Lyapunov Approach | Studies in Systems, Decision and Control, Artificial | DOI:10.1007/978-3-031-89771-9_146 |
98 | Naresh Kumar Jothi, Anusha Muruganandham, Jayant Giri | Modeling and Control of Rabies | Studies in Systems, Decision and Control, Artificial | DOI:10.1007/978-3-031-89771-9_147 |
99 | Naresh Kumar Jothi, Anusha Muruganandham, Jayant Giri | Global Stability and Control of Rabies | Studies in Systems, Decision and Control, Artificial | DOI:10.1007/978-3-031-89771-9_148 |
100 | Naresh Kumar Jothi, V. Vadivelu, Jayant Giri | Mathematical Modeling of Treatment | Studies in Systems, Decision and Control, Artificial | DOI:10.1007/978-3-031-89771-9_149 |
101 | P. Senthil Kumar, Naresh Kumar Jothi, Jayant Giri, | Fuzzy Reliability Model for the Effect | Studies in Systems, Decision and Control, Artificial | DOI:10.1007/978-3-031-89771-9_150 |
102 | P. Senthil Kumar, Naresh Kumar Jothi, Jayant Giri , | Fuzzy Threshold Shock Model | Studies in Systems, Decision and Control, Artificial | DOI:10.1007/978-3-031-89771-9_151 |
103 | R. Shanmugapriya, M. Vasuki, Naresh Kumar Jothi, Jayant Giri | Fuzzy Resolving Double Domination Set | Studies in Systems, Decision and Control, Artificial | DOI:10.1007/978-3-031-89771-9_152 |
104 | N. Nagabhushana, G. Manjunath, Girish V. Kulkarni, Abdullah Alqammaz, | Studies on Hybrid Solar Water Heating | Studies in Systems, Decision and Control, Artificial | DOI:10.1007/978-3-031-89771-9_153 |
105 | V. Moorthi, C. Solaimuthu, S. Gopinath, Abdullah Alqammaz, | Operation of a Multi-cylinder Diesel | Studies in Systems, Decision and Control, Artificial | DOI:10.1007/978-3-031-89771-9_154 |
106 | T. V. Deeksha Jain, K. S. Deepika, Jayant Giri | Media Pipe for Sign Language | Studies in Systems, Decision and Control, Artificial | DOI:10.1007/978-3-031-89771-9_155 |
107 | G. Srinivasa, Anil R. Sedamkar, Jayant Giri | Restrained Roman Edge Domination | Studies in Systems, Decision and Control, Artificial | DOI:10.1007/978-3-031-89771-9_156 |
Faculty Publication Details (Book)- 2019-2023
| Sr. No. | Name of Authors | Title of Book | Publisher | Year of Publication | ISBN |
| 1 | Dr.ShilpaSahare, Dr.SachinUntawale, Dr.PrashantKamble | Investigation of milling process parameters under optimum lubricant use by Taguchi approach | Prominent Publication, Nagpur | 10/10/2021 | 978-93-91786-22-9 |
| 2 | Dr. Arun Kedar and Dr. Yogesh V. Deshpande, | Line Balancing of Pain Line in Toy Manufacturing Industry | Innovative Scientific Publication, Nagpur | 2022 | 978-81-949989-5-2 |
| 3 | Dr. Sunil Prayagi Ketan Deshmukh | Design and Analysis of CNC Bending Machine and manufacturing using3D Printing Technology for Refractory Anchor | Innovative Scientific Publication, Nagpur | 2022 | 978-81-949989-5-3 |
Sr. No. | Subject | PPTs | Name of the Author | Aplication Status | Diary No. |
1 | Experimental Investigation of Passive Cooling Of CPV Cell Using Fins with Heat Pipe | Exp | Y.Y.Nandurkar | Registered | 38738/2024-CO/L |
2 | Engineering Graphics Lab Manual on orthographic projection | Lab Manual | P.S.Barve | Registered | 12205/2025-CO/L |
3 | Pelton Turbine Experiment Lab Manual | Lab Manual | Nilesh D. Gedam | Registered | 14218/2025-CO/L |
4 | Case Study based Experimentation on Group Technology | Lab Manual | Manish Dakhore | Registered | LD-16406/2025-CO |
5 | Experiment on Venturimeter | Lab Manual | Vijay Khawale | Registered | LD-29154/2025-CO |
6 | Assembly Of Knuckle Joint | Lab Manual | Pratik Lande | Registered | LD-31728/2025-CO |
7 | Force Sensors, Torque Sensors And Slip Sensors | ppt | Surendra Nagpure (CF) | Registered | 1838/2025-CO/L |
8 | Sheet Metal Shop Manual | Lab Manual | Vijay G. Thakre | Registered | LD-38761/2025-CO |
Skill Development and Higher Education Events
| Name of Event | Event date from | to | Expert | No. of Students | Faculty coordinator |
| How to crack CAT | 23-07-2024 | 23-07-2024 | Abhishek Soni | 50 | Prof. N.D.Gedam |
| Advance Approaches for Conquering the CAT Examination | 16-08-2024 | 16-08-2024 | Yash Mandpe | 40 | Prof. N.D.Gedam |
| Students psychology for GATE exam and other competitive exam | 16-10-2024 | 16-10-2024 | Shishir Persai | 60 | Prof. N.D.Gedam |
| Project training and design drafting | 22-10-2024 | 22-10-2024 | Zeeshan | 60 | Prof. N.D.Gedam |
| Opportunities for Students in Research and Development in the USA | 13-01-2025 | 13-01-2025 | Piyush Thakre | 67 | Prof. N.D.Gedam |
| Track to Future Railway Engineering for Mechanical Engineers | 21-02-2025 | 21-02-2025 | Gunjankumar Wasnik | 60 | Prof. N.D.Gedam |
| Importance of Higher Study and Research for Future Prospective | 27-02-2025 | 27-02-2025 | Dr. Devendra Deshmukh | 60 | Prof. N.D.Gedam |
| Research Funding Proposal | 03-03-2025 | 03-03-2025 | Dr. Pravin Patil | 38 | Prof. N.D.Gedam |
| Application of Catia Software and its Benefits | 03-12-2025 | 03-12-2025 | Anil Jain | 80 | Prof. N.D.Gedam |
| Prospective for Higher Studies and Opportunities in Germany | 21-03-2025 | 21-03-2025 | Dheeraj Dey | 80 | Prof. N.D.Gedam |
| Engineering of Leadership: Technicalities in CAT & Life through IIM | 13-04-2025 | 13-04-2025 | Amogh Sahastrabudhe | 50 | Prof. N.D.Gedam |
| Project Training and Design Drafting | 16-04-2024 | 16-04-2024 | Zeeshan | 60 | Prof. N.D.Gedam |
| Guidance on Aptitude Test, CRT, CAT & Different Government Exam | 17-04-2025 | 17-04-2025 | Subham Wakade | 60 | Prof. N.D.Gedam |
| Dr. Prashant D Kamble | ME | AN AUTOMATED TYRE INSPECTION SYSTEM | 202421068306 | 10-09-2024 | Published |
| Prof. A. B. Amale | ME | AN AUTOMATIC QUANTIFIABLE CEREAL DISPENSER | 202421069639 | 14-09-2024 | Published |
| Ajay S Bonde | ME | A SYSTEM FOR AUTOMATED TANK LEVEL MONITORING AND PUMP CONTROL | 202421069594 | 14-09-2024 | Published |
| Shrikant Jachak | ME | A TOOL POST FOR MEASURING CUTTING FORCES IN LATHE OPERATIONS | 202421067132 | 05-09-2024 | Published |
| Dr. R. B. Chadge | ME | A Spice Pulverizer Machine | 202421069638 | 14-09-2024 | Published |
| PROF. DIPTI PRASHANT KHEWALE | ME | AN AUTOMATED ROBOTIC SYSTEM FOR WATER HYACINTH GROWTH | 202421072225 | 24-09-2024 | Published |
| Dr. Sachin Bagde | ME | A GOAT FARM CLEANING SYSTEM | 202421072226 | 24-09-2024 | Published |
| Dr. S. S. Khedkar | ME | A WALKING AID FOR KNEE ARTHRITIS PATIENT | 202421072228 | 24-09-2024 | Published |
| Sachin P. Ambade | ME | A ROTARY SIEVE SEPARATOR | 202421072229 | 24-09-2024 | Published |
| GOPALDAS H WAGHMARE | ME | AN AUTOMATIC MATTRESS CLEANER | 202421082523 | 29-10-2024 | Published |
| Prof. N. R. Suneria | ME | A SOLAR POWERED WATER DISTILLATION SYSTEM | 202421076773 | 09-10-2024 | Published |
| Dr. Shilpa Bhimrao Sahare | ME | A SEMI-AUTOMATIC SURFACE CLEANING MACHINE | 202421090404 | 21-11-2024 | Published |
| Sr. No. | Subject | PPTs | Name of the Author | Application Status | Diary No. |
|---|---|---|---|---|---|
| 1 | Arrangement of Power Transmission to wheels in Automobiles | PPTs | P.S.Barve | Registered | 13874/2023-CO/L |
| 2 | Optimization of Drilling Process Using RSM | PPT | P.D.Kamble | Registered | 24261/2023-CO/L |
| 3 | BASIC PRINCIPLES OF MANAGEMENT | PPT | P.V.LANDE N.R.SUNEHERIYA | Registered | 29462/2023-CO/L |
| 4 | PERSONNEL MANAGEMENT | PPT | Surendra Kumar Nagpure | Registered | 33405/2023-CO/L |
| 5 | Design and Fabrication of Weeding Robot for agriculture Application | POSTER | Vijay Thakre | Registered | 7131/2024-CO/L |
| 6 | Design and Fabrication of Airport Baggage Diverter System | POSTER | Shilpa B. Sahare, Dr.Prashant D. Kamble | Registered | 15910/2024-CO/L |
| 7 | Lecture on Industrial Safety | PPT | Nischal Mungle | Registered | 14379/2024-CO/L |
| 8 | Major engine components in automobiles | PPT | Purushottam S. Barve | Registered | 12047/2024-CO/L |
| 9 | Introduction to product design and Process | PPT | Prasad H. Hathwalne | Re scruitiny | 23680/2024-CO/L |
| 10 | HYDRAULIC SERVO SYSTEMS | PPT | Chetan Mahatme | Re scruitiny | 23575/2024-CO/L |
| Sr. No. | Subject | PPTs | Name of the Author | Aplication Status | Diary No. |
| 1 | Orthographic Projection | PPT | Sujata Kimmatkar | Registered | 4683/2022-CO/L |
| 2 | Quantitative Techniques -UnitI | PPT | P.S.Barve | Pending for Hearing | 19721/2021-CO/L |
| 3 | Industrial Engineering and productivity | PPT | Manish Dakhole | Re-scruitiny | 15775/2022-CO/L |
| 4 | Lab Manual Fluid Power Lab | Lab Manual | Prasad Hathwalne | Re-scruitiny | 12392/2022-CO/L |
| 5 | Methods of Broken Tap Removal | PPT | M.S.Tufail | Re-scruitiny | 6714/2022-CO/L |
| 6 | Reliability Engineering Notebook | NOTEBOOK | Ajinkya Edlabadkar | Re-scruitiny | 16062/2022-CO/L |
| 7 | Lathe Unit -II | PPT | Gopaldas Waghmare | Re-scruitiny | 24028/2022-CO/L |
| 8 | Analysis of Regenerative Braking System | POSTER | Yogesh Nandurkar | Re-scruitiny | 20232/2022-CO/L |
| 9 | Unit II-Geometric Transformation in CAD | PPT | Prasad Hathwalne | scruitiny | 26717/2022-CO/L |
| Sr. No. | Name of Faculty | Department/ Institution | Title of the patent | Application No. | Filing Date | Status |
| 1 | Khewale Dipti Prashant; Bhagat Sahil Prakash | Me/Ycce | An Autonomous Flower Harvesting Robot With Soft Robotics | 202521094849 | 02/10/2025 | Awaiting Request for Examination |
| 2 | Bhambere Manisha Madhao; Bhambere Madhao Baliram; Chaudhari Sharad S. | Me/Ycce | An Electric Motor | 202521095447 | 04/10/2025 | Awaiting Request for Examination |
| 3 | Khewale Dipti Prashant; Bhagat Sahil Prakash; Adakane R.V.; Edlabadkar Ajinkya P.; Thatere A.B.; Shende, Nikhil Purushottam; Hotey, Ananya Atul Fulzele, Mahi Ravindra Bijwe, Sharayu Sharad; Gaikwad, Vedant Shashikant | Me/Ycce | An Autonomous Logistics Drone System | 202521096171 | 06/10/2025 | Awaiting Request for Examination |
| 4 | Kashyap Dipti N. Narkhede, Alok R. Khedkar Sandip S. Mane, Namrata S. Shinde Aryan Jaikumar, Om Gaiki Sahil | Me/Ycce | An Autonomous Seed Sowing Robot | 202521096172 | 06/10/2025 | Awaiting Request for Examination |
| 5 | Chadge Rajkumar Giri Jayant P. Sunheriya Neeraj Chadge Monali | Me/Ycce | An Auto-Level Electromechanical Screw Jack | 202521096166 | 06/10/2025 | Awaiting Request for Examination |
| 6 | Khewale Dipti Prashant; Edlabadkar Ajinkya Prakash; Chaudhari Sharad Sudhakhar; Bele Mahesh Ramrao; Gaikwad Swati | Me/Ycce | A Real Time Non-Contact Diameter Monitoring And Control System For Wire Production | 202521096167 | 06/10/2025 | Awaiting Request for Examination |
| 8 | Jachak Shrikant Rajabhau , Chavan Saransh Avinash, Masram Bharati Yashwant , Edlabadkar Ajinkya Prakash, Mahakalkar Sachin Girish | Me/Ycce | A Column Filling Machine | 202521096741 | 07/10/2025 | Awaiting Request for Examination |
| 9 | Sunheriya Neeraj Giri Jayant P. Chadge Rajkumar Mahatme Chetan , Lande Pratik , Giri Pallavi | Me/Ycce | A Photovoltaic-Powered Circulatory Solar Thermal Water Heating System | 202521097154 | 08/10/2025 | Awaiting Request for Examination |
| 10 | Giri Jayant, Sunheriya Neeraj , Chadge Rajkumar, Giri Pallavi, Khedkar Sandip | Me/Ycce | A Compact Electro-Mechanical Winch System For Lifting And Pulling Loads | 202521097150 | 08/10/2025 | Awaiting Request for Examination |
| 11 | Amale Ashvin, | Me/Ycce | A Solar Based Water Distillation System With Spiral Tube Flat Plate Collector | 202521097562 | 09/10/2025 | Awaiting Request for Examination |
| 12 | Shahare Devendra ,Gawande Ujwalla ,Thakre Avinash , Thorat Prathmesh Giri, Jayesh Khond Akash Mandekar Ankita | Me/Ycce | A Personal Protective Equipment Kit For Miners | 202521097565 | 09/10/2025 | Awaiting Request for Examination |
| 13 | Sahare Shilpa Bhimrao, Kamble Prashant, Mungle Nischal | Me/Ycce | An Automated Airport Baggage Diverter And Tracking System | 202521097569 | 09/10/2025 | Awaiting Request for Examination |
| 14 | Khedkar Sandip Sudhakarrao, Khedkar Pranali Sandip | Me/Ycce | An Autonomous Depth Control And Blockage Detection Of Tractor Operated Sowing Mechanism | 202521097568 | 09/10/2025 | Awaiting Request for Examination |
| 15 | Waghmare Gopaldas | Me/Ycce | A Flexible And Reusable Neck Orthosis | 202521097563 | 09/10/2025 | Awaiting Request for Examination |
| Sr. No. | Name of Faculty | Department/ Institution | Title of the patent | Application No. | Filing Date | Status |
| 1 | Prof. N. R. Sunheria | ME/YCCE | A SOLAR BASED SYSTEM FOR WATER DISTILLATION | 202321044246 | 02-07-2023 | Published |
| 2 | Prof. D. Y. Shahare | ME/YCCE | A DEVICE FOR GULPHA BASTI TREATMENT | 202321051120 | 29-07-2023 | Published |
| 3 | Prof. D. Y. Shahare | ME/YCCE | A RAW MANGO CUTTING MACHINE | 202321049107 | 29-07-2023 | Published |
| 4 | Prof. D. Y. Shahare | ME/YCCE | A TURNTABLE FOR SPRAY PAINTING” | 202321049524 | 30-09-2023 | Published |
| 5 | Prof. D. N. Kashyap | ME/YCCE | AN APPARATUS FOR VERSATILE UNINTERRUPTED POWER SUPPLY FOR SMALL NETWORKING DEVICES | 202321081212 | 30-11-2023 | Published |
| 6 | Dr. S. S. Khedkar | ME/YCCE | AN ADJUSTABLE VERTICAL AXIS WIND TURBINE | 202321044572 | 03-07-2023 | Published |
| 7 | Dr. S. S. Khedkar | ME/YCCE | AN ADVANCED PERIPHERAL INTRAVENOUS CANNULA | 202321044570 | 03-07-2023 | Published |
| 8 | Dr. S. S. Khedkar | ME/YCCE | A BATTERY POWERED TILLING MACHINE | 202321044571 | 03-07-2023 | Published |
| 9 | Prof. A.S. Bonde | ME/YCCE | A SYSTEM FOR U TURN AND LANE CHANGE INDICATOR | 202321049526 | 22-07-2023 | Patent granted on 21-11-2024 patent No. is 554712 |
| 10 | Prof.A. S. Bonde | ME/YCCE | A TURNTABLE FOR SPRAY PAINTING | 202321049524 | 22-07-2023 | Patent granted on 31-12-2024 patent No. is 557253 |
| 11 | Prof. M. S. Tufail | ME/YCCE | A SYSTEM FOR MEASURING TIME DURATION AND POWER CONSUMPTION OF ELECTRIC 12DISCHARGE MACHINING | 202321081216 | 30-11-2023 | Granted on 30-09-2024 and patent no.551559 |
| 12 | Dr. G. M. Dhote | ME/YCCE | A RAPID THYROID TESTING DEVICE | 202321081210 | 30-11-2023 | Granted on 17-03-2025 and patent no.562607 |
| 13 | Dr. S. S. Chaudhari | ME/YCCE | MINIMUM QUANTITY LUBRICATION SYSTEM | 202321051652 | 01-08-2023 | Published |
| 14 | Dr. S. P. Ambade | ME/YCCE | PORTABLE WINDOW-MOUNTED COOLER INCORPORATING EVAPORATIVE COOLING AND CONTROL SYSTEM | 202321054994 | 16-08-2023 | Granted on 06-05-2024 patent No. 536887 |
| 15 | Prof. G. H. Waghmare | ME/YCCE | DESIGN AND FABRICATION OF A REUSABLE WRIST ORTHOSIS | 202321051655 | 01-08-2023 | Granted on 05-04-2024 patent no 532007 |
| 16 | 1) Dr. Khedkar Sandip Sudhakarrao 2) Dandekar Paras Sunil | ME/YCCE | BIKE GEAR CHANGING ACCESSORY | 202321070782 | 17/10/2023 | Published |
| 17 | Jayant Giri | ME/YCCE | INTERNET OF MEDICAL (IOM) THINGS BASED SYSTEM AND METHOD FOR HEALTHCARE | 202321086456 | 18/12/2023 | Published |
| Sr. No. | Name of Faculty | Department/ Institution | Title of the patent | Application No. | Filing Date | Status |
| 1 | Prof. N. R. Sunheria | ME/YCCE | A SOLAR BASED SYSTEM FOR WATER DISTILLATION | 202321044246 | 02-07-2023 | Published |
| 2 | Prof. D. Y. Shahare | ME/YCCE | A DEVICE FOR GULPHA BASTI TREATMENT | 202321051120 | 29-07-2023 | Published |
| 3 | Prof. D. Y. Shahare | ME/YCCE | A RAW MANGO CUTTING MACHINE | 202321049107 | 29-07-2023 | Published |
| 4 | Prof. D. Y. Shahare | ME/YCCE | A TURNTABLE FOR SPRAY PAINTING” | 202321049524 | 30-09-2023 | Published |
| 5 | Prof. D. N. Kashyap | ME/YCCE | AN APPARATUS FOR VERSATILE UNINTERRUPTED POWER SUPPLY FOR SMALL NETWORKING DEVICES | 202321081212 | 30-11-2023 | Published |
| 6 | Dr. S. S. Khedkar | ME/YCCE | AN ADJUSTABLE VERTICAL AXIS WIND TURBINE | 202321044572 | 03-07-2023 | Published |
| 7 | Dr. S. S. Khedkar | ME/YCCE | AN ADVANCED PERIPHERAL INTRAVENOUS CANNULA | 202321044570 | 03-07-2023 | Published |
| 8 | Dr. S. S. Khedkar | ME/YCCE | A BATTERY POWERED TILLING MACHINE | 202321044571 | 03-07-2023 | Published |
| 9 | Prof. A.S. Bonde | ME/YCCE | A SYSTEM FOR U TURN AND LANE CHANGE INDICATOR | 202321049526 | 22-07-2023 | Patent granted on 21-11-2024 patent No. is 554712 |
| 10 | Prof.A. S. Bonde | ME/YCCE | A TURNTABLE FOR SPRAY PAINTING | 202321049524 | 22-07-2023 | Patent granted on 31-12-2024 patent No. is 557253 |
| 11 | Prof. M. S. Tufail | ME/YCCE | A SYSTEM FOR MEASURING TIME DURATION AND POWER CONSUMPTION OF ELECTRIC 12DISCHARGE MACHINING | 202321081216 | 30-11-2023 | Granted on 30-09-2024 and patent no.551559 |
| 12 | Dr. G. M. Dhote | ME/YCCE | A RAPID THYROID TESTING DEVICE | 202321081210 | 30-11-2023 | Granted on 17-03-2025 and patent no.562607 |
| 13 | Dr. S. S. Chaudhari | ME/YCCE | MINIMUM QUANTITY LUBRICATION SYSTEM | 202321051652 | 01-08-2023 | Published |
| 14 | Dr. S. P. Ambade | ME/YCCE | PORTABLE WINDOW-MOUNTED COOLER INCORPORATING EVAPORATIVE COOLING AND CONTROL SYSTEM | 202321054994 | 16-08-2023 | Granted on 06-05-2024 patent No. 536887 |
| 15 | Prof. G. H. Waghmare | ME/YCCE | DESIGN AND FABRICATION OF A REUSABLE WRIST ORTHOSIS | 202321051655 | 01-08-2023 | Granted on 05-04-2024 patent no 532007 |
| 16 | 1) Dr. Khedkar Sandip Sudhakarrao 2) Dandekar Paras Sunil | ME/YCCE | BIKE GEAR CHANGING ACCESSORY | 202321070782 | 17/10/2023 | Published |
| 17 | Jayant Giri | ME/YCCE | INTERNET OF MEDICAL (IOM) THINGS BASED SYSTEM AND METHOD FOR HEALTHCARE | 202321086456 | 18/12/2023 | Published |
| Sr. No. | Name of Faculty | Department/ Institution | Title of the patent | Application No. | Filing Date | Status |
| 1 | Dr.S.S.Khedkar | ME/YCCE | PORTABLE COMPOSTER | 2021105388 | 44420 | Granted on 10-11-2022 |
| 2 | Prof. D. Y. Shahare, Prof. S. Nagpure | ME/YCCE | FAN CLEANING DEVICE AND METHOD THEREOF | 2.02221E+11 | 44616 | Granted on 07/02/2023, Patent no. 420771 |
| 3 | Dr. S. R. Jachak | ME/YCCE | AN ADHESIVE BONDED TURNING TOOL | 2.02121E+11 | 44561 | Granted on 30-12-2022, Patent No. 416226 |
| 4 | Dr.S.S.Khedkar | ME/YCCE | AN APPARATUS FOR STREACHING HAMSTRING MUSCLES | 2.02021E+11 | 44174 | Granted on 29/12/2022, Patent no. 416036 |
| 5 | Dr. S. P. Ambade | ME/YCCE | A SYSTEM FOR WATER-EFFICIENT COOLING CONTROL OF DESERT AIR COOLER | 2.02121E+11 | 44561 | Granted on 08-12-2022, Patent No. 413931 |
| 6 | Dr.S.S.Khedkar | ME/YCCE | AN ENGINE OPERATED TRENCHING MACHINE | 2.02121E+11 | 44561 | Granted on 08-12-2022, Patent No. 413881 |
| 7 | Dr.S.S.Khedkar | ME/YCCE | AN APPARATUS FOR DISPENSING HERBAL ENEMA MEDICINE | 2.02121E+11 | 44561 | Granted on 03-11-2022, Patent No. 410937 |
SN | Dept. | Title of Proposal | Name of Coordinator/s | Funding Agency | Funding Scheme | Amount (Lakhs) | Status: Submitted/ Sanctioned |
1 | ME | Experimental Investigation and Analysis of Carbon Footprint of BioNanofluids for Eco-Friendly Refrigerant HVAC Cooling Solutions | Dr.S.S.Chaudhari | DST, | NSTMIS | 22.13 | Submitted |
2 | ME | Design, development and experimental investigation of Passive Direct Ascorbic Acid Fuel Cell | Dr. R. B. Chadge , Dr Neeraj Sunheriya | RTMNU | RTMNU | 2.69 | Submitted |
3 | ME | A Flood Water Removing Device | D.Y.Shahare | NRDC | NRDC | 7.05 | Waiting for results |
4 | ME | Innovative Tooling with Adhesive Bonding Enhancing Turning Efficiency | Dr.S.R.Jachak | AMT | TTI | 95.50 | Submitted |
5 | ME | Development of a Smart Rapid Thyroid Testing Device with TSH Test Kit for Efficient and Accurate Thyroid Diagnosis | Dr.G.M.Dhote | AMT | TTI | 28.30 | Under review |
6 | ME | Enhancing Welding Quality Through AI Powered, IOT Enabled Sensor Networks…. | Dr. S. P. Ambade | AMT | TTI | 11 | Submitted |
7 | ME | Intricacies of Industrial IoT and Agile Manufacturing | Dr.S.S.Chaudhari Prof. Ajinkya Edlabadkar | AICTE | ATAL FDP | 3.5 | Submitted |
8 | ME | Recent Advancement for material engineering in defence and aerospace industries. | Dr.N.P.Mungale Dr.P.D.Kamble | ANRF | SG | 0.72 | Submitted |
9 | ME | Application of AI in thermal engineering | V.M. KORDE | SERB | SEMINAR | 2.3 | Submitted |
10 | ME | One day seminar on “Computational techniques in thermal engineering” | Dr.N.Sunheria | SERB | SEMINAR | 0.30 | Submitted |
SN | Dept. | Title of Proposal | Name of Coordinator/s | Funding Agency | Funding Scheme | Amount (Lakhs) | Date of Submission | Status: Submitted/ Sanctioned |
1 | ME | IDE BOOT CAMP | Dr.S.S.Khedkar | MoE | BOOTCAMP | 16.00 | 04/01/2024 | Sanctioned |
2 | ME | FABRICATION AND ANALYSIS OF AQUA SILENCER | D.I.Sangotra | Advanced Research Translation (ART) | BITS BioCyTiH Foundation | 0.84 | 08/01/2024 | Submitted NO Reply |
3 | ME | BRIDGING GAP BETWEEN MECHANICAL INDUSTRY | Prof.A.P.Edlabadkar | SERB | SG/Symposia | 1.20 | 02/02/2024 | SANCTIONED |
4 | ME | Industrial IOT | Prof.A.P.Edlabadkar | SERB | SG/Symposia | 1.20 | 28/06/2024 | SUBMITTED |
5 | ME | Robotics and Automation | Prof.A.P.Edlabadkar | SERB | SG/Symposia | 1.20 | 28/06/2024 | SUBMITTED |
6 | ME | EMPOWERING FUTURES: PROMOTION OF STEM EDUCATION AMONG RURAL CHILDREN SPECIAL FOCUS ON SC/ ST GIRL STUDENTS IN NAGPUR REGION | Dr.U.H Gawande | DST | NCSTC | 51.42 | 31/07/2024 | SUBMITTED |
Project Proposals | ||||||||
SN | Dept. | Title of Proposal | Name of Coordinator/s | Funding Agency | Funding Scheme | Amount (Lakhs) | Date of Submission | Status: Submitted/ Sanctioned |
1 | ME | iHub AwaDH/SAMRIDHI 4.0/IDEATION | Dr.S.S.Khedkar | IIT Ropar | —– | 2.5 | —— | Awarded Grant on 25 Feb 2025 |
5INHOUSE FUNDING | ||||||||
SN | Dept. | Title of Proposal | Name of Coordinator/s | Funding Agency | Funding Scheme | Amount (Lakhs) | Date of Submission | Status: Submitted/ Sanctioned |
1 | ME | Performance Improvement of MJT 50 br Cell by using heat Pipe with FIN | Mr. Y.Y. Nandurkar | MGI | Innovative Experimental Set Up | 25000 | 25-May-24 | SANCTIONED |
2 | ME | Determination of natural frequency of spring damper(Suspension System) by experimental and theoretical method | Mr. P.V. Lande | MGI | Minor Research and Product Development | 30000 | 25-May-24 | SANCTIONED |
3 | ME | Experimental Investigation on similar welded joints of IS2062 E350C by conventional and unconventional weldingt process | Mr. P. V. Lande | MGI | Minor Research and Product Development | 50000 | 25-May-24 | SANCTIONED |
4 | ME | Performance analysis of Solar power Vapour absorption system. | Dr. V.R. Khawale | MGI | Innovative UG/PG Project | 23000 | 25-May-24 | SANCTIONED |
5 | ME | Development of Automated Lower Limb Continuous Passive Motion (CPM) Machine. | Mr. M. M. Dakhore | MGI | Innovative Experimental Set Up | 6000 | 25-May-24 | SANCTIONED |
6 | ME | Experimental Investigation on the Performance and Optimization of Bifacial Solar Panels for maximum cell efficiency. | Mr. N. R. Sunheriya | MGI | Innovative Minor Patentable Project | 94500 | 25-May-24 | SANCTIONED |
7 | ME | Design and Development of Innovative Rover for the ISRO Rover Competition 2024 | S. S. Khedkar | MGI | Minor Research and Product Development | 30000 | 25-May-24 | SANCTIONED |
8 | ME | Development of Motor Operated Fodder Cutting and Collecting Machine | Mr. M. M. Dakhore | MGI | Innovative Minor Patentable Project | 16500 | 12-Sep-24 | SANCTIONED |
9 | ME | Portable Electric Powered Tiller Machine | Mr. P. S. Barve | MGI | Minor Research and Product Development | 30000 | 12-Sep-24 | SANCTIONED |
10 | ME | Development of Solar Cooker by using Nanofluid for Domestic and Agricultural Industries | Dr. N. Mungale | MGI | Minor Research and Product Development | 36000 | 12-Sep-24 | SANCTIONED |
11 | ME | Experimental Investigation of Concentration Effect for Hybrid Nanoparticles in Gravity Heat Pipe
| Mr. Devendra Shahare
| MGI | Minor Research and Product Development
| 31000
| 9-Dec-24 | SANCTIONED |
| SN | Dept. | Title of Proposal | Name of Coordinator/s | Funding Agency | Funding Scheme | Amount (Lakhs) | Date of Submission | Status: Submitted/ Sanctioned |
| 1 | ME | Development and performance evaluation of VCR,air conditioning system by using Hybrid nano technologyaccompanying ecofriendly-working medium | Dr.S.S.Chaudhari A.H.Pundkar | IIT Guhawati | PRISM-PHASE I | 6 | 26-05-2023 | Submitted |
| 3 | ME | Intricacies of Industrial IOT and agile manufacturing | D.N.Kashyaap Dr.S.S.Chaudhari | SERB | SG/Symposia | 1.4 | 12/08/2023 | Approved |
| 6 | ME | Investigating Physiological Effects of Fatigue in Coal Mining Workers: Towards Enhanced Occupational Health and Safety | AJAY S BONDE D.Y.SHAHARE | COAL INDIA | S & T COAL INDIA LTD | 23.129 | 27-12-2023 | SUBMITTED |
| 7 | ME | Bridging the gap between theoretical and physical world in mechanical engineering | Ajinkya Edlabadkar | DST | Seminar and symposia | 1.28 | 12-12-2023 | Sanctioned |
| INHOUSE FUNDING | ||||||||
| 1 | ME | P.A.Hatwalne | 1900/- | Sanctioned | ||||
| 2 | ME | M.S.Tufail | 9300/- | Sanctioned | ||||
| 3 | ME | Cloth Drying Machine | S.S.Nagpure | 20500 | Sanctioned | |||
| 4 | ME | “Performance investigation of solar dryers for agriculture food product and green hurbes” | N.P.Mungale | 98000/- | Sanctioned | |||
| 5 | ME | A 3-D Printed Training Device for Medical Professionals for Simulating Effective Lumbar Puncture Procedure | C.A.Mahatme | 20000/- | Sanctioned | |||
| 6 | ME | Design and fabrication of reusable functional and effective wrist orthosis | G.H.Waghmare | 25000/- | Sanctioned | |||
| 7 | ME | Multipurpose medicine container | D.Y.Shahare | 30000/- | Sanctioned | |||
| 8 | ME | Fabrication and analysis of aqua silencer | D.I.Sangotra | 25000/- | Sanctioned | |||
| SN | Dept. | Title of Proposal | Name of Coordinator/s | Funding Agency | Funding Scheme | Amount (Lakhs) | Date of Submission | Status: Submitted/ Sanctioned |
| 1 | ME | Advances in 3-D printing for Healthcare Industry | C.A. Mahatme | SERB | SG/ | 1.6L | 22-07-2022 | Rejected |
| 2 | ME | “Bridging the gap between Theoretical and Physical World in Mechanical Engineering Domain” | A. R.Narkhede | SERB | SG/ | 1.6L | 22-07-2022 | Rejected |
| 3 | ME | “Design and Analysis of Experiments: A Research Approach” | S.R.Jachak | SERB | SG/ | 1.6L | 22-07-2022 | Rejected |
| 4 | ME | Optimisation of topology of DICOM (Ct Scan) for pre-surgical models using additive manufacturing | Dr J.P.Giri | RGSTC | 5L | 22-07-2022 | Submitted | |
| 5 | ME | Six Sigma | P.N.Shende | SERB | SG/ | 1.6L | 26-07-2022 | Submitted |
| 6 | ME | An Investigation on cladding of functionally graded high entropy additive manufacturing process using cold metal transfer(CMT) | Dr.S.P.Ambade | SERB | EEQ | 34.24 | 25-06-2022 | Provisionally accepted for further processing |
| 7 | ME | Renewable and non Reneable energy and its future | N.D.Gedam P.S.Barve | SERB | SG/ | 1.6L | 11-10-2022 | Rejected |
| 8 | ME | Sustainable maching of super alloy | P.S.Barve N.D.Gedam | SERB | SG/ | 0.95L | 11-10-2022 | Rejected |
| 9 | ME | Substractivemcahining on CNC and Lathe handson | M.M.Dakhore | SERB | SG/ | 1.6L | 11-10-2022 | Submitted |
| 10 | ME | Bridging the gap between theortical and physical world in mechanical Engineering | A.B. Amale | SERB | SG/ | 1.3l | 12-12-2022 | Submitted |
| S.N | Name of Event | Event date from | to | Expert | No. of Students | Faculty Coordinator |
| 1 | Mech-fiesta | 22-08-2025 | 23-08-2025 | Dr. Yogesh Dandekar | 320 | Ajinkya Edlabadkar, Dr. Niraj Sunheria, Dipti Kashyap, Alok Narkhede, Dr. Shilpa Sahare |
Session 2024-25
| Sr. No. | Name of the Event | Event Date from | To | Expert | No. of Students | Faculty Co-ordinator |
| 1 | Visit by UK Delegates | 17/07/2024 | 20/04/2024 | 300 | Dr. J.P.Giri Dr. R.B.Chadge | |
| 2 | Installation of Student Chapters MESA, ASME, SAE | 05th August 2024 | 05th August 2024 | 150 | Prof. A.P.Edlabadkar Prof. R.G.Bodkhe | |
| 3 | Unveiling of Departmental Magazine | 15th August 2024 | 15th August 2024 | ——- | 12 | Prof. A.P.Edlabadkar |
| 4 | Mechfiesta-2023 | 05/10/2023 | 07/10/2023 | Mr. Vaibhav zarkar, Senior Manager , TAAL, Nagpur | 300 | Prof. A.P.Edlabadkar |
| 5 | Teacher’s Day Celebration | 5th Sept 2024 | 5th Sept 2024 | ————– | 380 | Prof. A.P.Edlabadkar |
| 6 | Innovation Day | 15/10/2024 | 15/10/2024 | Mr. Himanshu Sewalkar Director, Square Feet 9 | 150 | Prof. A.P.Edlabadkar |
| 7 | Felicitation of Team SAE | 18/10/2024 | 18/10/2024 | Mr. Pramod Patwardhan | 150 | Prof. R.G.Bodkhe |
| 8 | Visit by UK Delegates | 22/10/2024 | 26/04/2024 | 300 | Dr. J.P.Giri Dr. R.B.Chadge | |
| 9 | Pratikruti-2025 National Level Project Competition | 25/02/2025 | 25/02/2025 | Mr. Rajendra Jagtap (Alumni1991) Director Rajendra Associates Mr. Pravin Sharan, (Alumni1998)Deputy Director , OCW, Nagpur Mr. Sagar Bhadbhade, (Alumni-1991) Director Ferro Arts, Nagpur | 650 | Dr. J.P.Giri Dr. R.B.Chadge Dr. S.S. Chauhdari Dr. S.GMahakalkar Prof. A.P.Edlabadkar |
| 10 | Session on Optimisation tools | 02/04/2025 | 02/04/2025 | Dr. Avinash Thakre | 150 | Dr. G.M.Dhote Prof. D.Y.Shahare |
Session 2023-24
| S.N | Name of Event | Event date from | to | Expert | No. of Students | Faculty Coordinator |
| 1 | Unveiling of Departmental Magazine | 15th August 2023 | 15th August 2023 | ——- | 12 | Prof. A.P.Edlabadkar |
| 2 | Teacher’s Day Celebration | 5th Sept 2023 | 5th Sept 2023 | ————– | 380 | Prof. A.P.Edlabadkar |
| 3 | Installation of Student Chapters MESA, ASME, SAE | 15th Sept 2023 | 15th Sept 2023 | Mr. Dheeraj Dey (Alumni 1998) | 150 | Prof. A.P.Edlabadkar Prof. R.G.Bodkhe |
| 4 | Mechfiesta-2023 | 05/10/2023 | 07/10/2023 | Mr. Nitesh Narkhede | 300 | Prof. A.P.Edlabadkar |
| 5 | How to Crack the GATE EXAM | 17/11/2023 | 17/11/2023 | Mr. Welekar, Director, GATE forum | 150 | Prof. Nilesh Gedam |
| 6 | Hands on Expertise on DOE | 12/01/2025 | 15/01/2025 | Prof. S.R.Jachak Prof. P.D.Kamble | 30 | Prof. S.R.Jachak Prof. P.D.Kamble |
| 7 | Hands on Expertise on DOE | 20/02/2024 | 21/02/2024 | Prof. C.A Mahatme Prof. D.Y.Shahare | 30 | Prof. C.A Mahatme Prof. D.Y.Shahare |
| 8 | Intricacies of MATLAB | 11/03/2024 | 14/03/2024 | Prof. R.V.Adkane | 50 | Prof. R.V.Adkane |
Session 2022-23
| S.N | Name of Event | Event date from | to | Expert | No. of Students | Faculty Coordinator |
| 1 | CATIA V5 by virtual Simutech Pvt Ltd Pune | 17-01-2023 | 03-02-2023 | Mr. Anil Jain , Virtual cematic PVT.LTD | 35 | Prof. P.Shirpurkar |
| 2 | Computer Aided Modelling by Solid Works | 10-09-2022 | 10-12-2022 | Dr.P.D.Kamble, Prof. P.Shirpurkar, Prof.P.Hathwalne | 104 | Prof.P.Hathwalne |
| 3 | Application of CAE using ANSYS | 07-10-2022 | 12-11-2022 | Prof. D.Y.Shahare | 81 | Prof. D.Y.Shahare |
| 4 | Awareness on Recruitment in NDA | 13-10-2022 | 13-10-2022 | Ishan Kinkhede | 160 | Prof. R.G.Bodkhe |
| 5 | Supply Chain Management | 21-09-2022 | 21-09-2022 | Dr. R.S. Chandana | 100 | Prof. R.G.Bodkhe |
| 6 | Career Counselling personality Development and importance of english language | 08-12-2022 | 08-12-2022 | Ritu Onkar | 155 | Prof. R.G.Bodkhe |
| 7 | Waste to Energy | 29-09-2022 | 29-09-2022 | Dr.Samir Kolte | 160 | Prof. R.G.Bodkhe |
| 8 | Opportunities for “faculties and students immersion program | 22-12-2022 | 22-12-2022 | Gagan Agrawal | 165 | Prof. R.G.Bodkhe |
| 9 | Industry 4.0 Applications in Foundries | 13-12-2022 | 13-12-2022 | Chandrashekhar Mankar | 175 | Prof. R.G.Bodkhe |
| 10 | Internship and placement opportunities at Germany | 10-02-2023 | 10-02-2023 | Dheeraj Dey, Aditya Jiwane | 175 | Prof. R.G.Bodkhe |
| Session | Total No. of Student Placed |
| 2024-25 | 47 |
| 2023-24 | 123 |
| 2022-23 | 78 |
Sr. No | Roll No. | University Serial No. | Student name | Name of Employer | Package (LPA) |
1 | 1 | 22071177 | JOSHI AKSHITA PARAG | TASL | 4.5 |
2 | 4 | 22071256 | KOLHE ASHLESHA PRAMOD | LTTS | 4.1 |
3 | 7 | 22070317 | KHANDALE NIRJALA VINAYAK | Bosch | 5 |
4 | 8 | 22070587 | LIKHAR RASIKA DNYANESHWAR | Kalpataru | 5.5 |
5 | 9 | 22070586 | AMBOKAR RIYA GIRISH | UltraTech | 6.5 |
6 | 10 | 23030053 | THOTE RUCHITA SUBHASH | Bosch | 5 |
7 | 12 | 23030052 | DHARNIDHAR TINA PRAKASH | TASL | 4.5 |
8 | 16 | 22071127 | LONDHE AARADHYA RAJENDRA | TASL | 4.5 |
9 | 19 | 22071311 | SHUKLA ADITYA UMESH | TASL | 4.5 |
10 | 22 | 22071394 | NITNAWARE ANOM BALRAJ | JSW | 5.5 |
11 | 25 | 22070258 | DEMDE ARYAN TILAK | Lloyds Metals | 5 |
12 | 28 | 23030034 | KHONDE ATHARVA SANJAY | Calderys | 6 |
13 | 30 | 22071061 | URKUDE AYUSH VILAS | Lloyds Metals | 5 |
14 | 31 | 22071075 | GHODICHORE AYUSH CHANDRASHEKHAR | TASL | 4.5 |
15 | 32 | 22071314 | NAGDEVE BHAVESH DIPAK | Marut Air | 3.5 |
16 | 34 | 22070977 | SHAHARE CHAITANYA DIPAK | JSW | 5.5 |
17 | 37 | 22070299 | HARDE DEVENDRA RAJENDRA | Lloyds Metals | 5 |
18 | 38 | 22070252 | JOGI DIPESH BHUPENDRA | Lloyds Metals | 5 |
19 | 39 | 22071400 | UNDIRWADE DNYANESH NIRANJAN | UltraTech | 6.5 |
20 | 44 | 22070088 | SARODE HIMANSHU RAJENDRA | Lloyds Metals | 5 |
21 | 45 | 22070867 | MESHRAM JASMEET LAXMIKANT | Lloyds Metals | 5 |
22 | 46 | 22071335 | MONDAL JAYANT DIPAK | Sagacious | 5.5 |
23 | 47 | 22070957 | PRADHAN JAYESH DINESH | Lloyds Metals | 5 |
24 | 50 | 22070946 | KIRTIVARDHAN MAROTI KHUSPURE | TASL | 4.5 |
25 | 54 | 22070949 | DHANVIJAY MAITRAY SANJAY | Lloyds Metals | 5 |
26 | 55 | 23030057 | DHURVE MANGESH RAMKISAN | Lloyds Metals | 5 |
27 | 56 | 22071321 | DHANVIJAY MAYUR PRASHANT | Avaada | 4.8 |
28 | 57 | 22070073 | CHOUDHARY MAYUR PRAKASH | Bosch | 5 |
29 | 65 | 23030176 | ALONE SUSMIT VIVEK | Bosch | 5 |
30 | 101 | 23030137 | UMATHE DIVYA KASHINATH | Lloyds Metals | 5 |
31 | 103 | 22071210 | BARAPATRE SAKSHI SHIVSHANKAR | Sagacious | 5.5 |
32 | 105 | 22070662 | CHOPDE SEJULA RAJENDRA | JSW | 5.5 |
33 | 106 | 22071328 | AGBATTANWAR SHRUTIKA ASHOK | TASL | 4.5 |
34 | 107 | 22070327 | AGNIHOTRI SOUMYA PRASANNA | TASL | 4.5 |
35 | 108 | 22071003 | BURELE SRUSHTI MADHUKAR | TASL | 4.5 |
36 | 110 | 22071216 | KUKDE TANUJA PRADIP | JSW | 5.5 |
37 | 111 | 22071399 | MADDIPATI TEJASWINI | Sagacious | 5.5 |
38 | 118 | 23030101 | ANASANE AYUSH ANIL | L&T Core | 6.5 |
39 | 119 | 23030079 | MESHRAM BHAVESH RAJESH | L&T Core | 6.5 |
40 | 120 | 23030126 | SONKUSARE DHARMESH VIJAY | Sagacious | 5.5 |
41 | 121 | 22070768 | WANJARI HARSHAL DEEPAK | L&T Core | 6.5 |
42 | 122 | 22070054 | BANTE MAHESH ISHWAR | Bosch | 5 |
43 | 123 | 21070596 | DOYE MAYANK SANTOSHKUMAR | Alucomet | 3 |
44 | 124 | 23030120 | BARAPATRE MAYUR UMAKANT | Lloyds Metals | 5 |
45 | 125 | 22070954 | OM AJAY RAJULWAR | JSW | 5.5 |
46 | 126 | 22070121 | MANE OM RAJESH | JSW | 5.5 |
47 | 128 | 22070058 | DHALE PRAJWAL PRASHANT | Kalpataru | 5.5 |
48 | 129 | 22071325 | JAGTAP PRAJWAL CHAHADEV | JSW | 5.5 |
49 | 130 | 22070621 | DANGE PRANAV NILKANTH | JSW | 5.5 |
50 | 131 | 22071125 | ROTKE PRANAY MORESHWAR | LTTS | 4.1 |
51 | 132 | 22070970 | BORKAR PRATIK KISHOR | L&T Core | 6.5 |
52 | 134 | 22071405 | PATRALE PREM VINOD | Infosys SE | 3.6 |
53 | 139 | 22071357 | PATIL RUTUJ UMESH | UltraTech | 6.5 |
54 | 141 | 22070265 | GAJWE SANKALP DHARMENDRA | Sagacious | 5.5 |
55 | 143 | 22070184 | AMBATKAR SANYAM NARAYAN | JSW | 5.5 |
56 | 144 | 22071142 | BHUJADE SARVESH SATISHRAO | Lloyds Metals | 5 |
57 | 145 | 22071236 | TEKODE SHANTANU SHANKAR | Metlok | 5 |
58 | 146 | 22071313 | CHAURAGADE SHESHANT ANANDKUMAR | JSW | 5.5 |
59 | 147 | 22071017 | POTDAR SHLOK LAXMIKANT | LTTS | 4.1 |
60 | 151 | 22070643 | DAS SPANDAN SUSHANT | JSW | 5.5 |
61 | 153 | 22070792 | GAJBHIYE TANISHK RAMCHANDRA | Avaada | 4.8 |
62 | 156 | 22071146 | BHADANGE VEDANT SANDEEP | LTTS | 4.1 |
63 | 157 | 22070351 | VISHAL SAHU | LTTS | 4.1 |
64 | 159 | 22071197 | CHAMAT YODHIN NARENDRA | JSW | 5.5 |
65 | 160 | 22070270 | TAWALE YUGANT HARICHANDRA | Infosys SE | 3.6 |
Sr. No | Roll. No | Enrollment. No | Name of student | Name of Employer | Package (L.P.A) |
1 | 1 | 22030078 | Amisha Madhukar Ingole | TASL | 6 |
2 | 2 | 22030132 | Apurva Vijay Urkude | Innovapptive | 5 |
3 | 4 | 21070293 | Madhura Pramod Wankhade | Bristlecone | 4.5 |
4 | 11 | 21070018 | Abhas Dhanraj Pise | infosys | 3.25 |
5 | 16 | 22030071 | Aryan Rajendra Mene | M&M/Innovapptive (Hold) | 4.5 |
6 | 17 | 22030245 | Atharva Mohan Pathak | Hyundai/Zoho | 4.5 |
7 | 18 | 21070397 | Ayush Dilip Maske | JSW | 5.5 |
8 | 19 | 21070664 | Ayush Nitin Jambhulkar | L&T Core | 4 |
9 | 20 | 21070011 | Biranchi Bhawesh Mahto | JSW | 5.5 |
10 | 22 | 21071037 | Harshit Shailesh Umale | JSW | 5.5 |
11 | 23 | 21070707 | Himanshu Prabhudas Sonewane | JSW | 5.5 |
12 | 24 | 22030030 | Ishant Sidharth Dhoke | Hyundai/M&M | 4.5 |
13 | 26 | 22030226 | Mo Numanul Qadeer Mo Usman | Metlok | 4.65 |
14 | 27 | 21070051 | Nachiket Sanjay Subhedar | Sagacious IP | 3.25 |
15 | 28 | 21070520 | Paras Rana Singh Saini | Metlok/Capge # 4.25 | 4.65 |
16 | 33 | 22030051 | Pushpam Jeevanlal Deshmukh | SCHWING STETTER | 8 |
17 | 34 | 21071157 | Raghav Vivek Sontakke | Bristlecone/Capge # 4.25 | 4.5 |
18 | 37 | 22030059 | Rutvik Omkar Ingole | Jubilant Foods | 7 |
19 | 39 | 21070460 | Sanket Yogesh Thakre | Infosys/ TASL | 3.25 |
20 | 42 | 21070296 | Shrikant Martand Gajbhiye | JSW | 5.5 |
21 | 44 | 22030092 | Sudipto Shyamapada Bag | UltraTech | 5.5 |
22 | 45 | 21070904 | Sumit Satishrao Badwaik | JSW | 5.5 |
23 | 48 | 22030198 | Vineet Subhash Jagdale | BeyBey | 3.5 |
24 | 53 | 21071091 | Vedang Shriram Paralkar | Neilsoft | 3.25 |
25 | 104 | 21070667 | Samyaka Suresh Munghate | TASL | 6 |
26 | 106 | 22030088 | Vaibhavi Suresh Wadbudhe | Bosch/ITC | 5.5 |
27 | 114 | 22030182 | Aryan Sudhakar Shinde | Metlok/L&T Core | 4.65 |
28 | 115 | 21071042 | Ashwadip Dhananand Sahare | infosys | 3.25 |
29 | 117 | 22030146 | Gautam Eknath Shelke | UltraTech | 5.5 |
30 | 119 | 21071308 | Jayesh Suresh Giri | infosys/Calderys | 3.25 |
31 | 120 | 21070206 | Kohad Kamod Dinanath | Metlok | 4.65 |
32 | 121 | 21070974 | Kaustubh Purushottam Barewar | infosys | 3.25 |
33 | 122 | 21071365 | Madhur Shrikant Natekar | Bristlecone | 4.5 |
34 | 123 | 21030253 | Navneet Madhav Thakre | BeyBey | 3.5 |
35 | 124 | 22030050 | Om Mangesh Jaikumar | Cognizant GenC/Capge # 4.25 | 4.25 |
36 | 125 | 21070922 | Piyush Ramesh Bajirao | TASL | 6 |
37 | 129 | 22030164 | Prathamesh Vinod Deshpande | Innovapptive | 5 |
38 | 130 | 22030204 | Prathmesh Murlidhar Bagwale | Megha Engg/Sagacious IP | 3.5 |
39 | 131 | 21070419 | Rajat Ramakant Gillurkar | JSW | 5.5 |
40 | 132 | 21070725 | Rajnish Vijay Rangari | Megha Engg | 3.5 |
41 | 133 | 21070064 | Rishi Nirav Shukla | Sagacious IP | 3.25 |
42 | 136 | 22030162 | Sahil Vilas Gaiki | L&T Core/Sagacious IP | 4 |
43 | 139 | 22030035 | Sanchit Subodhrao Kshirsagar | UltraTech | 5.5 |
44 | 140 | 22030069 | Sarthak Vilasrao Aswar | Metlok | 4.65 |
45 | 141 | 21070345 | Satvik Dipak Diwate | Diffussion | 3.5 |
46 | 143 | 21071240 | Shantanu Anil Khandwe | Metlok/Capge # 4.25 | 4.65 |
47 | 149 | 21070757 | Vedant Ganesh Lakhe | Innovapptive | 5 |
| STUDENT PLACEMENTS OF MECHANICAL ENGINEERING DEPARTMENT (CAY BATCH_2023-24) | |||||
| Sr. No | Roll. No | Enrollment. No | Name of student | Name of Employer | Package (L.P.A) |
| 1 | 1 | 21030012 | Aanchal Arvind Deshbhratar | BSA Engineering Pvt Ltd | 476000 |
| 2 | 2 | 20010603 | Aditi Ganesh Morghade | Endurance Technologies Ltd | 665000 |
| 3 | 3 | 20010448 | Devyani Kishor Dhargave | Precision Metal Works Pvt Ltd | 700000 |
| 4 | 4 | 20010355 | Metta Dnyaneshwar Bhandare | Blue Star Ltd. | 712000 |
| 5 | 7 | 20010613 | Sudha Radheshyam Nandanwar | Blue Star Ltd. | 712000 |
| 6 | 12 | 20010274 | Aditya Ashok Khobragade | NECO | 392000 |
| 7 | 13 | 21030052 | Aditya Raju Nimje | Semsys Pvt Ltd | 560000 |
| 8 | 15 | 21030119 | Akshay Ashok Patne | Tata Advanced Systems Ltd | 702000 |
| 9 | 18 | 20010002 | Ankit Madhukar Kumar | PMI | 700000 |
| 10 | 19 | 20010102 | Anurag Parag Aparajit | Mahindra & Mahindra Ltd | 560000 |
| 11 | 20 | 21030053 | Aryan Sanjay Ramteke | Emerald Resilient Tyre Manufacturers Pvt. Ltd | 588000 |
| 12 | 22 | 20010615 | Ashay Sanjay Shrirao | Blue Star Ltd. | 712000 |
| 13 | 23 | 21030005 | Ashish Pramod Jivtode | PMI | 700000 |
| 14 | 24 | 20010223 | Atharva Vijay Chimote | MyCaptain | 700000 |
| 15 | 26 | 21030044 | Bhivesh Bhupendra Katre | Emerald Resilient Tyre Manufacturers Pvt. Ltd | 588000 |
| 16 | 27 | 20011044 | Chaitanya Mahadeo Kohad | Konverge AI | 700000 |
| 17 | 29 | 21030024 | Dhananjay Suresh Hajare | ITC Ltd. | 715000 |
| 18 | 30 | 20010988 | Dnyaneshwar Narayan Giri | Technoventor Pvt Ltd | 560000 |
| 19 | 31 | 20010637 | Gagan Ganesh Kaware | Mecgale | 560000 |
| 20 | 33 | 20010127 | Harsh Rajiv Gathibandhe | NECO | 392000 |
| 21 | 34 | 20010344 | Himanshu Suresh Gundawar | Triveni Engineering & Industries Ltd | 700000 |
| 22 | 35 | 21030076 | Himanshu Rajesh Meshram | Tata Advanced Systems Ltd | 702000 |
| 23 | 36 | 20010287 | Ibrahim Murtaza Badri | Mahindra & Mahindra Ltd | 560000 |
| 24 | 37 | 21030028 | Jay Ganesh Atram | BSA Engineering Pvt Ltd | 476000 |
| 25 | 39 | 20010256 | Kamesh Subhash Ghatole | Innovaptive Technologies Pvt Ltd | 800000 |
| 26 | 41 | 20010587 | Mayur Ganesh Kumbhare | IFB Industries Ltd. | 715000 |
| 27 | 44 | 21030042 | Om Diliprao Gorde | Sagacious Research Pvt Ltd | 560000 |
| 28 | 45 | 21030034 | Parth Ramesh Dhore | IFB Industries Ltd. | 715000 |
| 29 | 46 | 21030059 | Parth Shirish Chaoji | Metlok Pvt Ltd | 702000 |
| 30 | 47 | 20010756 | Pawan Raju Mandekar | Mahindra & Mahindra Ltd | 560000 |
| 31 | 48 | 20010280 | Prachitesh Prakash Wakde | Bristlecone India Ltd | 708750 |
| 32 | 50 | 21030045 | Prathmesh Anil Sutrupkar | Caredose Labs Pvt Ltd | 392000 |
| 33 | 52 | 20010695 | Ram Dinesh Sant | Technoventor Pvt Ltd | 560000 |
| 34 | 53 | 20010333 | Ritesh Babarao Jadhao | Innovaptive Technologies Pvt Ltd | 800000 |
| 35 | 58 | 20010361 | Shardul Paresh Belan | Delhivery Pvt Ltd | 420000 |
| 36 | 59 | 20010225 | Shreyash Dinesh Pant | ITC Ltd. | 700000 |
| 37 | 60 | 20010386 | Shrirang Gajanan Chobe | Innovaptive Technologies Pvt Ltd | 800000 |
| 38 | 61 | 20010332 | Siddhesh Sachin Pande | Tata Advanced Systems Ltd | 702000 |
| 39 | 62 | 20011083 | Sohan Gautam Tabhane | Konverge AI | 700000 |
| 40 | 63 | 20010301 | Suvarsh Sunil Rajankar | Metlok Pvt Ltd | 702000 |
| 41 | 64 | 21030105 | Swayamdeep Arun Bhange | Tata Advanced Systems Ltd | 702000 |
| 42 | 70 | 20010763 | Yash Vinod Lad | Delhivery Pvt Ltd | 420000 |
| 43 | 101 | 20010691 | Arpita Vinod Ganvir | Tata Advanced Systems Ltd | 702000 |
| 44 | 102 | 20010801 | Divya Pravin Chamate | Semsys Pvt Ltd | 560000 |
| 45 | 105 | 21030026 | Sakshi Raju Virkhede | Grindwell Norton Ltd | 700000 |
| 46 | 106 | 20011152 | Sanchita Ramasre Yadav | Grindwell Norton Ltd | 700000 |
| 47 | 107 | 21030046 | Shraddha Vijayrao Mishra | WorleyParsons India Pvt Ltd | 702000 |
| 48 | 108 | 20011042 | Vaidehi Manoj Ingle | Tata Advanced Systems Ltd | 702000 |
| 49 | 111 | 20010919 | Abhishek Shastri Punde | Ceinsys Tech Ltd | 750000 |
| 50 | 112 | 20010414 | Aditya Dilip Pohane | Triveni Engineering & Industries Ltd | 700000 |
| 51 | 116 | 20011207 | Aryan Deepak Lade | Calderys | 734000 |
| 52 | 121 | 21030159 | Durgesh Jagdish Nannaware | Bajaj Steel, Nagpur | 560000 |
| 53 | 122 | 20010268 | Durgesh Ganesh Kapkar | Sagacious Research Pvt Ltd | 560000 |
| 54 | 123 | 21030226 | Ganesh Laxman Dake | INDAG Rubber | 700000 |
| 55 | 124 | 20010867 | Gaurav Pramod Kinholkar | GMG Technologies | 630000 |
| 56 | 125 | 21030171 | Gitesh Ajay Sakure | Gurutvaa Systems Pvt Ltd | 490000 |
| 57 | 126 | 20010810 | Himanshu Pandurang Sonkusare | IFB Industries Ltd. | 715000 |
| 58 | 127 | 20010346 | Himanshu Surendra Bambal | Sagacious Research Pvt Ltd | 560000 |
| 59 | 129 | 20010592 | Jayesh Vinay Rodge | Tata Consultancy Services Ltd | 610400 |
| 60 | 130 | 20010525 | Kartik Dharmendra Agroya | BSA Engineering Pvt Ltd | 476000 |
| 61 | 133 | 20010526 | Lalit Prabhakar Bhute | Blue Star Ltd. | 712000 |
| 62 | 134 | 20010114 | Mandar Arvind Purohit | Innovaptive Technologies Pvt Ltd | 800000 |
| 63 | 137 | 21030092 | Mohit Anil Gaikwad | Calderys | 734000 |
| 64 | 138 | 20010320 | Nehal Pramod Thape | Innovaptive Technologies Pvt Ltd | 800000 |
| 65 | 139 | 20010148 | Niraj Vinayak Tathod | Emerald Resilient Tyre Manufacturers Pvt. Ltd | 588000 |
| 66 | 140 | 20010614 | Niraj Sureshrao Manne | PMI | 700000 |
| 67 | 141 | 20010843 | Owais Ashfaque Sheikh | Innovaptive Technologies Pvt Ltd | 800000 |
| 68 | 144 | 20010743 | Pranay Sanjayrao Khobragade | Calderys | 734000 |
| 69 | 147 | 20010289 | Ramprasad Rajiv Lule | PMI | 700000 |
| 70 | 148 | 20011257 | Ritwik Arvind Kadu | Emerald Resilient Tyre Manufacturers Pvt. Ltd | 588000 |
| 71 | 151 | 21030111 | Satish Raju Bidkar | BSA Engineering Pvt Ltd | 476000 |
| 72 | 152 | 21030191 | Saurabh Vijay Pande | Urav Labs | 630000 |
| 73 | 153 | 21030199 | Shamsundar Gangadhar Ware | KSB Limited | 532000 |
| 74 | 158 | 20010995 | Spandan Devidas Patre | Elkem ASA | 476000 |
| 75 | 160 | 20010481 | Tejas Ramkrushna Gaiki | NECO | 392000 |
| 76 | 162 | 21030112 | Utkarsh Nitin Waghmare | Elkem ASA | 476000 |
| 77 | 163 | 21030154 | Uzair Shakeel Ahmed | J.M.D. Engineering Pvt Ltd | 476000 |
| 78 | 165 | 20010328 | Vaibhav Rajesh Amale | Semsys Pvt Ltd | 560000 |
| 79 | 166 | 21030081 | Vaibhav Liladhar Tandulkar | ITC Ltd. | 700000 |
| 80 | 167 | 21030114 | Vitthal Kashiram Kumre | Metlok Pvt Ltd | 715000 |
| 81 | 168 | 20010882 | Yash Narendra Ukey | Blue Star Ltd. | 712000 |
| 82 | 201 | 20010350 | Apeksha Kishor Bhaisare | Konverge AI | 700000 |
| 83 | 202 | 20011168 | Ayushi Sunilsingh Bais | Avtec Limited | 700000 |
| 84 | 203 | 20010098 | Isha Mukesh Mahalle | Mahindra & Mahindra Ltd | 560000 |
| 85 | 204 | 21030306 | Nemashri Kawduji Kulsange | Endurance Technologies Ltd | 665000 |
| 86 | 205 | 20010442 | Pavitra Suresh Athawale | Innovaptive Technologies Pvt Ltd | 800000 |
| 87 | 207 | 20010631 | Sakshi Vilasrao Chavhan | Calderys | 734000 |
| 88 | 208 | 20011090 | Sayali Anil Waghmare | Lemken | 630000 |
| 89 | 213 | 20010387 | Aditya Dilip Dhapodkar | Zoho Corporation Pvt Ltd | 720000 |
| 90 | 215 | 21030269 | Akash Bhojraj Dhoke | ITC Ltd. | 715000 |
| 91 | 217 | 21030313 | Aniket Harish Bilgaiya | Triveni Engineering & Industries Ltd | 700000 |
| 92 | 220 | 21030256 | Anshul Laxman Ghutke | Caredose Labs Pvt Ltd | 392000 |
| 93 | 221 | 20010083 | Aryant Sudhir Yeole | Mahindra & Mahindra Ltd | 560000 |
| 94 | 222 | 20010229 | Aviral Sanjay Bhivgade | Emerald Resilient Tyre Manufacturers Pvt. Ltd | 588000 |
| 95 | 223 | 20011196 | Dharmraj Devanand Kannake | BSA Engineering Pvt Ltd | 476000 |
| 96 | 224 | 20010789 | Durvesh Rajesh Mokadam | Emerald Resilient Tyre Manufacturers Pvt. Ltd | 588000 |
| 97 | 225 | 21030295 | Gaurav Shrikant Karajgikar | Hettich India Pvt. Ltd. | 560000 |
| 98 | 226 | 20010299 | Gunit Gulab Mandade | Precision Metal Works Pvt Ltd | 700000 |
| 99 | 229 | 20011066 | Himanshu Rameshwar Dhabarde | Calderys | 734000 |
| 100 | 232 | 21030260 | Kalpesh Sunil Bhonsle | Mahindra & Mahindra Ltd | 560000 |
| 101 | 233 | 20011059 | Khushal Sanjay Walde | Calderys | 734000 |
| 102 | 235 | 20010870 | Mrunal Naneshwar Bele | MyCaptain | 700000 |
| 103 | 236 | 21030238 | Nikhil Prabhakar Wankhede | Blue Star Ltd. | 712000 |
| 104 | 237 | 20010308 | Nilesh Chandrabhan Khonde | BSA Engineering Pvt Ltd | 476000 |
| 105 | 238 | 20010880 | Nishant Vijay Subhedar | Emerald Resilient Tyre Manufacturers Pvt. Ltd | 588000 |
| 106 | 239 | 21030279 | Om Rajesh Gujar | Tata Consultancy Services Ltd. Digital | 750000 |
| 107 | 246 | 20010731 | Raunak Satish Somkuwar | IFB Industries Ltd. | 715000 |
| 108 | 248 | 21030263 | Rushikesh Purushottam Nikam | Calderys | 734000 |
| 109 | 249 | 20011234 | Satyam Santosh Singh | ITC Ltd. | 700000 |
| 110 | 250 | 21030293 | Shahid Shamim Hussain | Hettich India Pvt. Ltd. | 560000 |
| 111 | 252 | 20010379 | Shreyas Sanjay Gajbhiye | Emerald Resilient Tyre Manufacturers Pvt. Ltd | 588000 |
| 112 | 253 | 20010838 | Shreyash Chandradas Meshram | Tata Consultancy Services Ltd. Digital | 750000 |
| 113 | 254 | 20010547 | Shubham Sanjeev Chepe | Triveni Engineering & Industries Ltd | 700000 |
| 114 | 256 | 20011003 | Sumit Subhash Kolhe | Emerald Resilient Tyre Manufacturers Pvt. Ltd | 588000 |
| 115 | 257 | 21030265 | Swapnil Hemant Deshmukh | INDAG Rubber | 700000 |
| 116 | 258 | 20011012 | Tanmay Balkrushna Pandao | BSA Engineering Pvt Ltd | 476000 |
| 117 | 259 | 20010878 | Tejas Gunderao Sontakke | SVP Mining | 630000 |
| 118 | 260 | 20010477 | Ujwal Kishor Ghate | Triveni Engineering & Industries Ltd | 700000 |
| 119 | 261 | 20010067 | Vaibhav Sudam Hatwar | Steel Infra Solutions | 630000 |
| 120 | 262 | 20010416 | Vaibhav Gurudeo Tajne | BSA Engineering Pvt Ltd | 476000 |
| 121 | 265 | 20010488 | Yash Anil Chaurasia | Mahindra & Mahindra Ltd | 560000 |
| 122 | 266 | 20011137 | Yash Anil Wange | INDAG Rubber | 700000 |
| 123 | 301 | 19010876 | Gaurav A Ingle | BSA Engineering Pvt Ltd | 476000 |
| Sr. No | Roll. No | Enrollment. No | Name of student | Name of Employer | Offer letter no | Package (L.P.A) |
| 1 | 2 | 19010940 | Arpita Bishnu Lal Singh | TASL | 30/01/2023 | 500000 |
| 2 | 3 | 19010836 | Asmita AshokraoDangre | Bristlecone | 28/11/2022 | 425000 |
| 3 | 4 | 20030029 | Dipali Santosh Rao Kale | My Captain | 9/1/2023 | 500000 |
| 4 | 5 | 19010741 | Isha Praveen Sakarde | Mahindra & Mahindra | email with T&P | 420000 |
| 5 | 7 | 18010467 | Nikita Dinesh Gudadhe | Bristlecone | 7/2/2023 | 425000 |
| 6 | 8 | 19010442 | Pragati Dilip Kumbhare | LTTS | LTTS/HR/ET/2023-24/1337 | 400000 |
| 7 | 9 | 20030185 | PriyanshiKrushnarao Athawale | Semsys | 9/3/2023 | 300000 |
| 8 | 10 | 19010939 | RutujaDevmanMalwar | TASL | 30/01/2023 | 500000 |
| 9 | 11 | 19010892 | Sakshee Ashik Tembhurkar | Sagacious | 27/12/2022 | 300000 |
| 10 | 17 | 19011162 | Ajit Satyveer Singh Shekhawat | Adani | 230687 | 650000 |
| 11 | 18 | 19010123 | Ajith Krishnan Nambudiripad | Konverge | 6/10/2022 | 460000 |
| 12 | 20 | 19010782 | Anup Bhimrao Bondre | Adani | 230686 | 650000 |
| 13 | 21 | 19010791 | Ashmak Siddharth Patil | Hettich | 10/3/2023 | 300000 |
| 14 | 26 | 19010639 | Bhushan Ramesh Kamdi | Adani | 230685 | 650000 |
| 15 | 28 | 19010223 | Devesh KhemchandKadekar | Cognizant | 2898999 | 401988 |
| 16 | 30 | 19010521 | Dhananjay PralhadAghav | My Captain | 9/1/2023 | 500000 |
| 17 | 33 | 19010322 | DnyandeepTimrajRewatkar | Cognizant | 2935566 | 401988 |
| 18 | 36 | 19010309 | Govind Manoj Prasad | Konverge | 6/10/2022 | 460000 |
| 19 | 38 | 19010819 | Harsh Prabhakar Shende | My Captain | 9/1/2023 | 500000 |
| 20 | 40 | 19010633 | Kaustubh Shamsundar Pawar | Cognizant | 2941522 | 401988 |
| 21 | 43 | 19010265 | Mohanish Chandrakant Bawankar | ITC Ltd. | 4/4/2023 | 430000 |
| 22 | 45 | 19010147 | Nikhil Kishor Chaudhari | My Captain | 9/1/2023 | 500000 |
| 23 | 47 | 20030008 | Prajwal AshokraoChamat | Hettich | 10/3/2023 | 300000 |
| 24 | 53 | 20030024 | RiteshSureshrao Raut | Cognizant | 2893421 | 401988 |
| 25 | 55 | 19010196 | Rushabh Vinod Bokde | Cognizant | 2928842 | 401988 |
| 26 | 56 | 20030010 | Sahadeo Rameshwar Gabhane | Capgemini | 2934075 | 400000 |
| 27 | 60 | 19010370 | Shubham Pravin Nimsarkar | Tata Technologies | email with T&P | 450000 |
| 28 | 61 | 19010125 | Shwetal Jayant Badwaik | Cognizant | 2936797 | 401988 |
| 29 | 64 | 19010816 | Taukeer Rafique Sheikh | JSW | 21/02/2023 | 800000 |
| 30 | 65 | 20030016 | Tejas Vivek Welankiwar | Sagacious | 27/12/2022 | 300000 |
| 31 | 67 | 19010103 | Tejas Mohan Kadwe | LTTS | LTTS/HR/ET/2023-24/1338 | 400000 |
| 32 | 72 | 19010788 | Yash Ramesh Kumbhare | LTI | 10/11/2022 | 406367 |
| 33 | 75 | 19010170 | Yash Suryakant Dalal | Adani | 230688 | 650000 |
| 34 | 102 | 19010905 | Gayatri Gajanan Dahake | My Captain | 9/1/2023 | 500000 |
| 35 | 103 | 19010502 | Janhavi Rakesh Katkamwar | Lemken | 20/04/2023 | 350000 |
| 36 | 105 | 20030049 | Meghana Narayan Mohankar | Blue Star | 3/3/2023 | 612000 |
| 37 | 106 | 19010052 | Sharvari Rajendra Pathak | Accenture | Not mentioned | 650000 |
| 38 | 107 | 20030075 | ShephaliChandrakishorTandekar | Blue Star | 3/3/2023 | 611000 |
| 39 | 108 | 19010768 | Shriya Manoj Dhole | LTI | 10/11/2022 | 406367 |
| 40 | 114 | 19010432 | Abhishek Vijay Padole | Semsys | 1/4/2023 | 300000 |
| 41 | 116 | 19011131 | Adesh Dilip Meshram | LTTS | LTTS/HR/ET/2023-24/1335 | 400000 |
| 42 | 117 | 19010871 | Aditya Kundan Ramteke | JSW | 21/02/2023 | 800000 |
| 43 | 118 | 19010107 | Aditya Sandip Solanki | Adani | 230681 | 650000 |
| 44 | 121 | 20030186 | Ameya Rajesh Bakre | LTI | 10/11/2022 | 406367 |
| 45 | 123 | 19010846 | Anitya Rajendra Nikose | Calderys | 27/03/2023 | 634000 |
| 46 | 125 | 19010700 | Ayush Ravindra Tidke | Capgemini | 2918661 | 400000 |
| 47 | 126 | 19010513 | Bhavesh MulchandFulewale | Capgemini | 2930197 | 400000 |
| 48 | 129 | 20030192 | Chinmay Dipak Thakkar | Accenture | Not mentioned | 650000 |
| 49 | 130 | 19010709 | Dhiraj Swaminath Bhaskar | TASL | 30/01/2023 | 500000 |
| 50 | 132 | 19010167 | Hemant Vilas Khiratkar | Cognizant | 3360126 | 401988 |
| 51 | 136 | 20030042 | Kshitij Rupesh Ramteke | Cognizant | 2929446 | 401988 |
| 52 | 140 | 20030048 | Ninad Ramesh Jawajwar | Accenture | Not mentioned | 650000 |
| 53 | 144 | 19010737 | Pratik Dharmesh Dewangan | Cognizant | 2929671 | 401988 |
| 54 | 145 | 19010986 | Purvesh Vijay Mohod | Tata Technologies | email with T&P | 450000 |
| 55 | 148 | 19010966 | Sanket Rajendra Khodke | My Captain | 9/1/2023 | 500000 |
| 56 | 149 | 19010742 | Satyam NamdeoBhoyar | Accenture | Not mentioned | 650000 |
| 57 | 151 | 19010883 | Shashank Yashwant Jibhakate | Adani | 230682 | 650000 |
| 58 | 154 | 19010851 | Shripad Nitin Umbarkar | LTI | 10/11/2022 | 406367 |
| 59 | 157 | 19010759 | Tanishque Anand Gedam | Accenture | Not mentioned | 650000 |
| 60 | 159 | 17010201 | Tejas Vinod Solaw | My Captain | 9/1/2023 | 500000 |
| 61 | 161 | 19010834 | Tejas Sharad Choudhari | LTTS | LTTS/HR/ET/2023-24/1337 | 400000 |
| 62 | 164 | 19010438 | Vishal Manilal Nair | JSW | 21/02/2023 | 800000 |
| 63 | 165 | 19010878 | Vivek Subhash Mahadule | Cognizant | 2921566 | 401988 |
| 64 | 166 | 20030045 | Yash Pravin Panchbhai | Cognizant | 2905642 | 401988 |
| 65 | 167 | 19010291 | Yash VenunathSorte | Capgemini 5.75 | 3525422 | 575000 |
| 66 | 168 | 19010135 | Yash PundlikBelekar | LTTS | LTTS/HR/ET/2023-24/1337 | 400000 |
| 67 | 171 | 19010136 | Praharsh Dilip Katole | JSW | 21/02/2023 | 800000 |
| 68 | 173 | 19010250 | Shrirang Shrinivas Wanikar | LTI | 10/11/2022 | 406367 |
| 69 | 203 | 19011110 | Prachi Kisan Gawande | Accenture | Not mentioned | 650000 |
| 70 | 205 | 18010722 | Radhika Ajay Katyarmal | My Captain | 9/1/2023 | 500000 |
| 71 | 207 | 19010550 | VedantiUttamraoHande | Cognizant | 2936150 | 401988 |
| 72 | 213 | 19011099 | Aditya Kailash Nagpure | LTI | 10/11/2022 | 406367 |
| 73 | 215 | 19010981 | Akshay Ravindra Patil | My Captain | 9/1/2023 | 500000 |
| 74 | 216 | 19011182 | Anshul Ramchandra Gajbhiye | Accenture | 2934241 | 650000 |
| 75 | 220 | 19010993 | Bhavesh Sunil Parate | Cognizant | 2938802 | 401988 |
| 76 | 224 | 18010449 | Dipesh Prashant Duratkar | LTTS | LTTS/HR/ET/2023-24/1336 | 400000 |
| 77 | 225 | 19010979 | Divyanshu Chandrakant Dangore | Cognizant | 2941381 | 401988 |
| 78 | 232 | 19011118 | Jitesh Vijay Polojwar | Adani | 230683 | 650000 |
| 79 | 236 | 19011104 | Manpreet Jarnail Singh | Metlok | 29/12/2022 | 450000 |
| 80 | 239 | 20030147 | Nimanshu Kishor Kolhe | Reliace Retail | email with T&P | 360000 |
| 81 | 240 | 20030094 | Om Sandeep Kottewar | Cognizant | 2949153 | 401988 |
| 82 | 245 | 20030109 | Prathamesh Rajesh Dangre | ITC Ltd. | 4/4/2023 | 430000 |
| 83 | 246 | 19011085 | Pratik RamajiLanjewar | Adani | 230689 | 650000 |
| 84 | 248 | 19010635 | Priyanshu Sharad Ashtikar | Semsys | 1/4/2023 | 300000 |
| 85 | 249 | 19011012 | Purvesh Narendra Rangari | Cognizant | 2931824 | 401988 |
| 86 | 250 | 19010256 | Rahul RangnathNandanwar | Cognizant | 2932295 | 401988 |
| 87 | 251 | 19010163 | Raj Satish Gupta | LTI | 10/11/2022 | 406367 |
| 88 | 254 | 19010450 | Rochak Rajendra Raut | Capgemini | 2895418 | 400000 |
| 89 | 255 | 20030096 | Rushabh Sanjay Puri | Semsys | 9/3/2023 | 300000 |
| 90 | 257 | 19010294 | Sahil Ashok Mankar | Konverge | 6/10/2022 | 460000 |
| 91 | 259 | 19011002 | Sarthak Jitendra Patre | Cognizant | 3368258 | 401988 |
| 92 | 262 | 19010117 | ShreyashAshokraoBorghare | LTTS | LTTS/HR/ET/2023-24/1175 | 400000 |
| 93 | 264 | 19010179 | Shubhankar Yogesh Deshmukh | Bristlecone | 5/2/2023 | 425000 |
| 94 | 265 | 19011014 | Snehanshu Sunil Somkuwar | My Captain | 9/1/2023 | 500000 |
| 95 | 266 | 19010468 | Soham ParitoshGhare | LTTS | LTTS/HR/ET/2023-24/1337 | 400000 |
| 96 | 268 | 19011038 | Swapnil Rajkumar Tighare | JSW | 21/02/2023 | 950000 |
| 97 | 269 | 19010104 | ToshalSachin Solanki | LTI | 10/11/2022 | 406367 |
| 98 | 272 | 19010035 | Vedant Avinash Palikundwar | Accenture | Not mentioned | 650000 |
| 99 | 274 | 19011042 | Yash Dnyaneshwar Chakole | Reliace Retail | email with T&P | 360000 |
| 100 | 277 | 19011078 | Yash Rajendra Bhonde | Adani | 230680 | 650000 |
Type of MoU | Name of Company | Year of Signing |
Industrial Visit, Internship and Industrial Project | Dhumal Engineering Factory: Unit No.: A-2, Plot No.: E-94, M.LD.C., Ambad, Nashik — 422010. | 2025 |
Industrial Visit, Internship and Industrial Project | “SNDR Technoarc Projects LLP.”, Pune,MH, India | 2025 |
| Sr. No. | Name of Company | Type of MoU | Year of Signing the MOU |
| 1 | Hydrogen Iperion tech Chennai | Industrial Visit, Internship and Industrial Project | 2024 |
| Sr. No. | Name of Company | Type of MoU | Year of Signing the MOU |
| 1 | Sandeep Metalcraft | Industrial Visit, Internship and Industrial Project | 2022 |
| 2 | Beacon Engineers | ||
| 3 | Precision Turncomponents | ||
| 4 | Sunder Buiscuits | ||
| 5 | Waghmare Masale | ||
| 6 | Suruchi Masale | ||
| 7 | SHIVAM FOOD PARLE-G | ||
| 8 | BUTIBORI MANUFACTURERS ASSOCATION | ||
| 9 | shreeJagdamba Pneumatics | ||
| 10 | Dhumal Engineering |
| Title of Event: “Industry Academia Conclave” |
| Date of Conduction: 25th November 2022 |
| No. of Faculty Participants: 40 |
| No. of Industry Participants: 37 |
Short Description of Event:Department of Mechanical Engineering in association with Training & Placement Department, Yeshwantrao Chavan College of Engineering, Nagpur has organised Industry Academia Conclave on 25th November 2022. Total about 37 industrialists from Vidarbha Industries association, Ashok Leyland, PIX Transmission, Bajaj Steel, Mecgale Pneumatics, Sundar Biscuits, Suruchi Masale, Waghmare Masale, Parle-G, Kinetic Gears, Heat Treatwell, Deepshikha Casting, Mahesh Casting, Mahindra Mahindra, Sandeep Metal craft, Indian Oil Corporation, Tata Aerospace Limited, Beacon Engineers, Plasto, SVP Mining Technologies, Meccano, TVS, Tanmay Industries, Techno Engg& Rubber , OCW Nagpur , Antony Waste Handling Cell , Eco Torque Solution, Aditya Engg Co, ButiboriManufacturers Association,INDORAMA, Duroallay India, Ajit Bakery, Scitreon, Johnson Lift, Shree Jagdamba Pneumatics have participated in the conclave. The objective of this Conclave was to bridge the gap between industry and Institute, to get practical exposure to engineering students through industrial visits, trainings, internship and industrial projects. The conclusion of this conclave was to give more focus on skill development of the students in terms of communication, confidence, personality, and managing the peoples which will be definitely helpful to increase the employability of students. “An Outcome of Industry Institute Conclave is to understand the industry & Concurrent issues in recent Scenario which really will be helpful in improving performance of Teaching as industrial need-based curriculum. Mr. Nitin Lonkar (YCCE Production Alumni 1989 Batch), President BMA was the chief guest for the conclave appreciated the efforts taken by team YCCE Mechanical. Dr. Uday Waghe, Principal, YCCE delivered the welcome address and discuss about the strength of YCCE. Sir appealed to all industrialists for collaboration with YCCE Technology Business Incubation centre for more products to be commercialize through current 10 innovative startups at YCCE. He thanked to all industry delegates for participating in this conclave. Dr. Jayant Giri, Head of Mechanical Engineering Department delivered his welcome note and departmental presentation and discusses the strength of the department. Sir specially mentioned that the department have 35 MoU’s with various industries for Internship and placement. Dr. Gauri Dhopavkar, Dean (T&P) delivered the presentation and discuss about the current status of internship and placement provided by the various companies. Prof. Rajesh Bodkhe, Convenor worked hard for the success of this conclave. Dr.R.B.ChadgeDr.SachinMahakalkar, Dr.Shard Chaudhari, Dr. Shrikant Jachak, Dr. Sachin Bagde, Prof. Ajinkya Edlabadkar, Dr. Prashant Kamble, Dr. Shilpa Kamble, Prof. Prasad Hatwalne, Prof Dipti Kashyap and all faculty members from the department of Mechanical Engineering were coordinated this activity for the overall grand success of this conclave. |
| Title of Event: “Industrial Advisory Board Meeting” |
| Date of Conduction: 29/04/2023 |
| No. of Faculty Participants: 40 |
| No. of Industry Participants: 02 |
| Industry Persons involved: 1. Mr. Nitin Lonkar, President, Butibori Manufacturing Association, Nagpur 2. Mr. Sumant Kishor Sahu, General Manager, Sandeep Metalcraft, Nagpur |
Meeting started with welcome of our Industry experts Mr. Nitin Lonkar, President, BMA and Mr. Sumant Kishor Sahu, General Manager, Sandeep Metalcraft at the hand of Dr. J. P. Giri, HOD ME and Dr. R. B. Chadge, Dy HOD, ME Aim and Objective of the meeting was discussed by Prof. R. G. Bodkhe, Incharge – III Cell, ME Department The purpose of Industrial Advisory Board is to support the mission of department with its educational and research program more oriented towards industry. Objectives 1) Bridge gap between Industry and Academia strengthening the ties 2) More intense and effective implementation of interaction channels like industrial visits, faculty and student internships, industry projects, training and consultancies 3) Offering more and more industry relevant courses through curriculum 4) The pursuit of new broad research agendas (eg.through the creation of research, innovation, incubation centres, and strategy for technology development) 5) Fostering entrepreneurship by facilitating expertise. Welcome note was given by Dr. J. P. Giri, HOD ME. Expectations from Industry experts discussed by head of department. Also appealed to extend the cooperation from industry for internship, placement of students and generation of revenue from consultancy by giving consultancy work to our expert faculty members. Also requested for proactive involvement in the overall process of the development of the department. Mr. Nitin Lonkar , President, BMA shared his view to collaborate and strengthen the relation between industry and Institute to get the practical exposure to students and faculties. He and his team from BMA recently visited to Germany to learn about industry culture and technical education at Germany. He discussed that many job opportunities are available in Germany. Industrial automation is up to the mark. In the month of July first week team from Germany will visit to India at MIDC Nagpur and Butibori for possible collaboration and investment. If possible,he will bring the German team in campus for interaction with faculty and students to discuss the opportunities at Germany. Mr. Sumantkishor Sahu, General Manager, Sandeep Metalcraft shared his vast technical experience in the field of submarines and especially the work carried out for defence services at Sandeep Metalcraft was discussed in brief. He discussed about the importance of gauges and tolerances while working on job for students as well faculties. He gave more thrust on practical experiments like measurement of dimensions and tolerances and focussed on“Students should be industry ready” at the end of their degree. The interaction and discussion with all faculty members was done to understand their views. Meeting ended with vote of thanks. Meeting was coordinated by Prof. Rajesh G. Bodkhe. All faculty members were prominently present. |
Session | Short Term Internship | Semester-Long Internship |
2025-26 | —– | 126 |
2024-25 | 107 | 93 |
2023-24 | 19 | 207 |
2022-23 | 4 | 217 |
S.N | Company name (Where Internship Started) | Organised BY | Name of students | Start date | End date |
1 | TASL | Ycce, Nagpur | JOSHI AKSHITA PARAG | 15-01-2026 | 15-05-2026 |
2 | Saboo plastics | Ycce, Nagpur | SURPAM ANUSHKA NARESH | 15-01-2026 | 15-05-2026 |
3 | TASL | Ycce, Nagpur | GIRADKAR APARNA HARIHAR | 15-01-2026 | 15-05-2026 |
4 | Replay International | Ycce, Nagpur | KOLHE ASHLESHA PRAMOD | 05-01-2026 | 05-05-2026 |
5 | KEC INTERNATIONAL LTD | Ycce, Nagpur | WATKAR DHANASHREE MANISH | 22-01-2026 | 22-05-2026 |
6 | SABOO PLASTICS | Ycce, Nagpur | KURVE KHUSHBU PRADIP | 15-01-2026 | 15-05-2026 |
7 | Weintern Pvt Ltd | Ycce, Nagpur | KHANDALE NIRJALA VINAYAK | 15-01-2026 | 15-05-2026 |
8 | Kalpataru Projects International Ltd | Ycce, Nagpur | LIKHAR RASIKA DNYANESHWAR | 16-02-2026 | 13-06-2026 |
9 | Ultratech | Ycce, Nagpur | AMBOKAR RIYA GIRISH | 13-01-2026 | 13-07-2026 |
10 | Weintern Pvt Ltd | Ycce, Nagpur | THOTE RUCHITA SUBHASH | 13-01-2026 | 13-07-2026 |
11 | Microshield Infotech | Ycce, Nagpur | RAMTEKE SANIA SANJAY | 13-01-2026 | 13-07-2026 |
12 | TASL | Ycce, Nagpur | DHARNIDHAR TINA PRAKASH | 13-01-2026 | 13-07-2026 |
13 | TASL | Ycce, Nagpur | LONDHE AARADHYA RAJENDRA | 06-01-2026 | 06-05-2026 |
14 | GMG Technotrades Private Limited | Ycce, Nagpur | GHARPURE AAYUSH SANJAY | 09-01-2026 | 09-05-2026 |
15 | SaiSumit Developers Private Limited | Ycce, Nagpur | BAMBOLE ABHIJIT BHASKAR | 08-02-2026 | 08-06-2026 |
16 | TASL | Ycce, Nagpur | SHUKLA ADITYA UMESH | 08-02-2026 | 08-06-2026 |
17 | Bosch | Ycce, Nagpur | BADKHAL AMAN RAMCHANDRA | 12-01-2026 | 30-06-2026 |
18 | Ordnance Factory | Ycce, Nagpur | Ambarish Mahendra Ogale | 12-01-2026 | 30-06-2026 |
19 | Eutronix Technologies Pvt Ltd | Ycce, Nagpur | NITNAWARE ANOM BALRAJ | 05-01-2026 | 05-05-2026 |
20 | Technoventor Innovations Pvt. Ltd. | Ycce, Nagpur | ZODE ANSHU DIGAMBAR | 05-01-2026 | 05-05-2026 |
21 | Infosys/Asia RefraTech | Ycce, Nagpur | ANURAG MESHRAM | 05-01-2026 | 05-05-2026 |
22 | Fire Cross Engineering Services | Ycce, Nagpur | DEMDE ARYAN TILAK | 05-01-2026 | 05-05-2026 |
23 | CADDESK | Ycce, Nagpur | Surkar Aryan Shravan | 17-01-2026 | 17-07-2026 |
24 | KINETIC GEARS | Ycce, Nagpur | BURBURE ASHISH VINOD | 24-01-2026 | 23-05-2026 |
25 | Replay International | Ycce, Nagpur | KHONDE ATHARVA SANJAY | 05-01-2026 | 05-05-2026 |
26 | Ordnance Factory | Ycce, Nagpur | THORANE ATHARVA VINOD | 16-01-2026 | 31-05-2026 |
27 | Replay International | Ycce, Nagpur | URKUDE AYUSH VILAS | 05-01-2026 | 05-05-2026 |
28 | TASL | Ycce, Nagpur | GHODICHORE AYUSH CHANDRASHEKHAR | 05-01-2026 | 05-05-2026 |
29 | Marut Air Systems | Ycce, Nagpur | NAGDEVE BHAVESH DIPAK | 01-01-2026 | 31-03-2026 |
30 | Prinston Smart Engineers | Ycce, Nagpur | PANTAWANE BRAHAT NARESH | 02-02-2026 | 22-06-2026 |
31 | Eutronix Technologies Pvt Ltd | Ycce, Nagpur | SHAHARE CHAITANYA DIPAK | 05-01-2026 | 05-05-2026 |
32 | SVP MINING | Ycce, Nagpur | GARASKAR CHAITANYA RAMESH | 05-01-2026 | 05-05-2026 |
33 | TASL | Ycce, Nagpur | PISE CHETAN NAMDEO | 05-01-2026 | 05-05-2026 |
34 | Sanvijay Infrastructure pvt ltd | Ycce, Nagpur | HARDE DEVENDRA RAJENDRA | 05-01-2026 | 05-05-2026 |
35 | Replay International | Ycce, Nagpur | JOGI DIPESH BHUPENDRA | 05-01-2026 | 05-05-2026 |
36 | UltraTech Cement Limited | Ycce, Nagpur | UNDIRWADE DNYANESH NIRANJAN | 13-01-2026 | 13-07-2026 |
37 | BMW | Ycce, Nagpur | DANDAGE GAURAV GAJANAN | 13-01-2026 | 13-07-2026 |
38 | SVP Mining | Ycce, Nagpur | PARDHI HARSH OMKAR | 01-02-2026 | 31-05-2026 |
39 | SVP Mining | Ycce, Nagpur | KHANDALE HARSHAL BALAJI | 01-02-2026 | 31-05-2026 |
40 | VNIT (Siemens Coe) | Ycce, Nagpur | HARSHIL WAIRAGADE | 02-02-2026 | 02-06-2026 |
41 | Dinanath Overseas India Pvt. Ltd | Ycce, Nagpur | SARODE HIMANSHU RAJENDRA | 20-01-2026 | 31-05-2026 |
42 | Scott Sheldon India Pvt. Ltd. | Ycce, Nagpur | MESHRAM JASMEET LAXMIKANT | 20-01-2026 | 31-05-2026 |
43 | Saagacios IP | Ycce, Nagpur | MONDAL JAYANT DIPAK | 20-01-2026 | 31-05-2026 |
44 | Replay Internationals | Ycce, Nagpur | PRADHAN JAYESH DINESH | 20-01-2026 | 31-05-2026 |
45 | Excel Controlinkage Pvt. Ltd. | Ycce, Nagpur | CHAVHAN JAYKUMAR NAMDEV | 20-01-2026 | 31-05-2026 |
46 | Replay International | Ycce, Nagpur | MISHRA KAUSAL VIJAY | 20-01-2026 | 31-05-2026 |
47 | Technoventor/TASL | Ycce, Nagpur | KIRTIVARDHAN MAROTI KHUSPURE | 20-01-2026 | 31-05-2026 |
48 | AKAR SPRING WORKS | Ycce, Nagpur | BHURE KUNAL TULARAM | 27-01-2026 | 27-07-2026 |
49 | KEC International LTD | Ycce, Nagpur | WAGHADE KUNAL ASHOK | 19-01-2026 | 19-05-2026 |
50 | AKAR SPRING WORKS | Ycce, Nagpur | BALBUDDHE MAHESH SUDAM | 27-01-2026 | 27-07-2026 |
51 | Nikhil Furnitures | Ycce, Nagpur | DHANVIJAY MAITRAY SANJAY | 15-01-2026 | 15-07-2026 |
52 | VNIT (Siemens Coe) | Ycce, Nagpur | DHURVE MANGESH | 02-02-2026 | 02-06-2026 |
53 | Nikhil Furnitures | Ycce, Nagpur | CHOUDHARY MAYUR | 15-01-2026 | 15-07-2026 |
54 | Prinston Smart Engineers | Ycce, Nagpur | DHANVIJAY MAYUR PRASHANT | 02-02-2026 | 22-06-2026 |
55 | Nikhil Furnitures | Ycce, Nagpur | HATWAR MITHESH MURLIDHAR | 15-01-2026 | 15-07-2026 |
56 | VS Irrigation and Solar | Ycce, Nagpur | PANSARE MOHANISH RAJESH | 15-01-2026 | 15-07-2026 |
57 | Sanvijay rolling and engineering group | Ycce, Nagpur | BHISE MOHIT VILAS | 15-01-2026 | 15-07-2026 |
58 | SVP MINING | Ycce, Nagpur | JADHAV ROSHAN PRABHAKAR | 15-01-2026 | 15-07-2026 |
59 | DRS Earthwork Pvt.Ltd | Ycce, Nagpur | SHEIKH SAHIL MUZAMMIL | 15-01-2026 | 15-07-2026 |
60 | General Industrial Control Pvt. Ltd. | Ycce, Nagpur | SHENDE SANDESH PRAKASH | 09-02-2026 | 09-06-2026 |
61 | Ingenium drives | Ycce, Nagpur | BODHARE SIDDHESH SANJAY | 02-01-2026 | 31-05-2026 |
62 | Bosch | Ycce, Nagpur | ALONE SUSMIT VIVEK | 15-01-2026 | 15-06-2026 |
63 | Ashok Leyland | Ycce, Nagpur | DONGRE TARUNYA UMESH | 09-02-2026 | 30-06-2026 |
64 | SVP mining | Ycce, Nagpur | BARAPATRE TEJAS GANESH | 09-02-2026 | 30-06-2026 |
65 | Replay international Pvt.Ltd | Ycce, Nagpur | UTKARSH RAJENDRA GAYMUKHE | 02-01-2026 | 05-05-2026 |
66 | AKAR SPRING WORKS | Ycce, Nagpur | SURYAWANSHI VAIBHAV RAMDAS | 27-01-2026 | 27-07-2026 |
67 | VMR Industries | Ycce, Nagpur | BODE YASH SANJAY | 27-01-2026 | 27-07-2026 |
68 | Ganpati Woven Polypack | Ycce, Nagpur | UMATHE DIVYA KASHINATH | 15-01-2026 | 30-04-2026 |
69 | Shailee Oil Mill | Ycce, Nagpur | MANKAR RUBAL VINOD | 20-01-2026 | 20-05-2016 |
70 | Sagacious Elevate | Ycce, Nagpur | BARAPATRE SAKSHI SHIVSHANKAR | 27-01-2026 | 26-07-2026 |
71 | Saboo plastic | Ycce, Nagpur | MESHRAM SAYALI SANJAY | 15-01-2026 | 15-05-2026 |
72 | K-SONS ELECTRICALS PVT. LTD | Ycce, Nagpur | CHOPDE SEJULA RAJENDRA | 15-01-2026 | 14-05-2026 |
73 | TASL | Ycce, Nagpur | AGBATTANWAR SHRUTIKA ASHOK | 15-01-2026 | 14-05-2026 |
74 | TASL | Ycce, Nagpur | AGNIHOTRI SOUMYA PRASANNA | 15-01-2026 | 14-05-2026 |
75 | TASL | Ycce, Nagpur | BURELE SRUSHTI MADHUKAR | 15-01-2026 | 14-05-2026 |
76 | MAHGENCO – CSTPS | Ycce, Nagpur | WASNIK SWAJAL SANJAY | 15-01-2026 | 14-05-2026 |
77 | Replay International | Ycce, Nagpur | KUKDE TANUJA PRADIP | 02-01-2026 | 31-05-2026 |
78 | SAGAGIOUS | Ycce, Nagpur | MADDIPATI TEJASWINI | 27-01-2026 | 26-07-2026 |
79 | Calderys | Ycce, Nagpur | CHAUDHARY VISHWASWINI MAHADEVRAO | 27-01-2026 | 26-07-2026 |
80 | sakshi udyog | Ycce, Nagpur | AMBADE ANSH RAJESH | 27-01-2026 | 26-07-2026 |
81 | AEROCOM AUTOMOTIVES | Ycce, Nagpur | BHOYAR AYUSH SANJAY | 29-01-2026 | 29-05-2026 |
82 | Ordnance factory | Ycce, Nagpur | ANASANE AYUSH ANIL | 29-01-2026 | 29-05-2026 |
83 | Mineral & Metal Testing service lab | Ycce, Nagpur | MESHRAM BHAVESH RAJESH | 15-01-2026 | 15-05-2026 |
84 | SagaciousElevate | Ycce, Nagpur | SONKUSARE DHARMESH VIJAY | 27-01-2026 | 26-07-2026 |
85 | JAIKA MOTORS PVT LTD | Ycce, Nagpur | WANJARI HARSHAL DEEPAK | 06-02-2026 | 06-06-2026 |
86 | TASL | Ycce, Nagpur | BANTE MAHESH ISHWAR | 06-02-2026 | 06-06-2026 |
87 | Alucomet | Ycce, Nagpur | DOYE MAYANK SANTOSHKUMAR | 06-02-2026 | 06-06-2026 |
88 | Kinetic Gears | Ycce, Nagpur | BARAPATRE MAYUR UMAKANT | 06-02-2026 | 06-06-2026 |
89 | JSW steel Kalmeshwar | Ycce, Nagpur | OM AJAY RAJULWAR | 06-02-2026 | 06-06-2026 |
90 | Maruti Suzuki | Ycce, Nagpur | MANE OM RAJESH | 01-01-2026 | 30-04-2026 |
91 | Kapilansh Dhatu Udyog | Ycce, Nagpur | NANDESHWAR PIYUSH MAHENDRA | 01-01-2026 | 30-04-2026 |
92 | JSW kalmeshwar | Ycce, Nagpur | JAGTAP PRAJWAL CHAHADEV | 01-01-2026 | 30-04-2026 |
93 | Kalpataru Projects International Ltd | Ycce, Nagpur | DHALE PRAJWAL PRASHANT | 16-02-2026 | 16-02-2026 |
94 | JSW steel Kalmeshwar | Ycce, Nagpur | DANGE PRANAV NILKANTH | 16-01-2026 | |
95 | Tata Power | Ycce, Nagpur | ROTKE PRANAY MORESHWAR | 20-01-2026 | 20-05-2026 |
96 | Mineral & Metal Testing service lab | Ycce, Nagpur | BORKAR PRATIK KISHOR | 15-01-2026 | 15-05-2026 |
97 | Infosys/ R. Jagtap Associates | Ycce, Nagpur | PATRALE PREM VINOD | 19-01-2026 | 18-05-2025 |
98 | Carraro Technologies India Pvt. Ltd. | Ycce, Nagpur | BEDARKAR PREM RAVINDRA | 19-01-2026 | 18-05-2025 |
99 | Ycce, Nagpur | AMBHORE RAHUL PRALHAD | 19-01-2026 | 18-05-2025 | |
100 | Sunny Infraenginners.Pvt.Ltd | Ycce, Nagpur | PAIGWAR RAJAT JAGDISH | 05-01-2026 | 15-05-2026 |
101 | AEROCOM AUTOMOTIVES | Ycce, Nagpur | RAJAT PRAKASH CHINCHOLE | 29-01-2026 | 29-05-2026 |
102 | GMG Technotrades Private Limited | Ycce, Nagpur | GURJAR ROHIT RAVINDRA | 09-01-2026 | 09-05-2026 |
103 | Ultratech Cement | Ycce, Nagpur | PATIL RUTUJ UMESH | 09-01-2026 | 09-05-2026 |
104 | YCCE TBI | Ycce, Nagpur | PANDIT SAHIL MANISH | 09-01-2026 | 09-05-2026 |
105 | Inspacco | Ycce, Nagpur | GAJWE SANKALP DHARMENDRA | 12-01-2026 | 12-07-2026 |
106 | Sunny Infraenginners.Pvt.Ltd | Ycce, Nagpur | CHINNAWAR SANSKAR AVINASH | 05-01-2026 | 15-05-2026 |
107 | Replay International | Ycce, Nagpur | AMBATKAR SANYAM NARAYAN | 05-01-2026 | 15-05-2026 |
108 | TASL | Ycce, Nagpur | BHUJADE SARVESH SATISHRAO | 05-01-2026 | 15-05-2026 |
109 | Metlok | Ycce, Nagpur | TEKODE SHANTANU SHANKAR | 05-01-2026 | 05-06-2026 |
110 | JSW steel Kalmeshwar | Ycce, Nagpur | CHAURAGADE SHESHANT ANANDKUMAR | 05-01-2026 | 05-06-2026 |
111 | R. Jagtap Associates | Ycce, Nagpur | POTDAR SHLOK LAXMIKANT | 19-01-2026 | 18-05-2025 |
112 | ZOHO | Ycce, Nagpur | RAUT SHUBHAM KRUSHNARAO | 19-01-2026 | 18-05-2025 |
113 | Replay INTERNATIONAL | Ycce, Nagpur | SMIT SUDHIR RAUT | 02-01-2026 | 05-05-2026 |
114 | Kapilansh Dhatu Udyog | Ycce, Nagpur | Sheikh Sonu Aslam | 02-01-2026 | 05-05-2026 |
115 | jsw Steel kalmeshwar | Ycce, Nagpur | DAS SPANDAN SUSHANT | 02-01-2026 | 05-05-2026 |
116 | Ordnance Factory | Ycce, Nagpur | FULZELE SUSHANT DINESH | 02-01-2026 | 05-05-2026 |
117 | MOIL LIMITED | Ycce, Nagpur | GAJBHIYE TANISHK RAMCHANDRA | 02-01-2026 | 05-05-2026 |
118 | Mineral & Metal Testing service lab | Ycce, Nagpur | MOGARE VARUN NARESH | 15-01-2026 | 15-05-2026 |
119 | Bharat Electronics Limited | Ycce, Nagpur | KEDAR VEDANT VIRENDRA | 15-01-2026 | 15-05-2026 |
120 | TASL | Ycce, Nagpur | BHADANGE VEDANT SANDEEP | 15-01-2026 | 15-05-2026 |
121 | BARC ( Technical Screening) | Ycce, Nagpur | VISHAL SAHU | 15-01-2026 | 15-05-2026 |
122 | SVP Mining | Ycce, Nagpur | NAKADE YASH HIRALAL | 15-01-2026 | 15-05-2026 |
123 | Maruti Suzuki | Ycce, Nagpur | CHAMAT YODHIN NARENDRA | 01-01-2026 | 30-04-2026 |
124 | Infosys/ R. Jagtap Associates | Ycce, Nagpur | TAWALE YUGANT HARICHANDRA | 19-01-2026 | 18-05-2025 |
125 | E Nirmalya Waste management | Ycce, Nagpur | Dhirya Gupta | 19-01-2026 | 18-05-2025 |
126 | Technoarc projects LLP | Ycce, Nagpur | Tushar Suryakant Lungare | 19-01-2026 | 18-05-2025 |
Short-Term Internships done by students (2023-24)
| Sr. No. | Title of Program | Organised BY | Name of Participants | Start Date | Completion Date |
| 1 | Electric Vehicle Technology | Kodacy | Mayur Choudhary | 15-06-2024 | 15-07-2024 |
| 2 | Mechanical Testing | Mr.Khushal Sitaraman Kukde | Himanshu kukde | 01-10-2022 | 01-11-2022 |
| 3 | Internship Training. | Hindalco Industries Limited. | Aryan Rajendra Mene | 23-05-2024 | 08-06-2024 |
| 4 | 2 Weeks Industrial Training | Aniya Saree Power Loom Saree Manufacturing | Harshit Umale | 21-05-2024 | 10-06-2024 |
| 5 | Utility & Central Maintenance Department | Self | Chaitanya Garaskar | 17-06-2024 | 17-07-2024 |
| 6 | Vacation Training Program | Koradi Training Centre, Koradi (MAHAGENCO) | Vaibhavi.S. Wadbudhe | 11-12-2023 | 05-01-2024 |
| 7 | Vacation training conducted at koradi traning center,koradi | Koradi traning center | Mohini Vilas shivankar | 11-12-2023 | 05-01-2024 |
| 8 | Smart Manufacturing (VR. Jamdar Siemens Center of Excellence) | VNIT, Nagpur | Bhavesh Dipak Nagdeve | 20-06-2024 | 15-07-2024 |
| 9 | Koradi trainings | Koradi training center mahagenco ok | Sanika Bhuyar | 11-12-2023 | 05-01-2024 |
| 10 | Vacation Training | Koradi Training Centre ( MAHAGENCO ) | Samyaka Munghate | 11-12-2023 | 05-01-2024 |
| 11 | Smart Manufacturing | Labhshree Bhimte | Anshu Zode | 20-06-2024 | 15-07-2024 |
| 12 | Maintenance | Chaten Gabne | Rajat Gillurkar | 21-05-2024 | 14-06-2024 |
| 13 | Maintenance department | Chetan Gabne | Sahil khadilkar | 21-05-2024 | 14-06-2024 |
| 14 | Summer training | Ordnance factory ambajhari | BIRANCHI MAHTO | 20-05-2024 | 19-06-2024 |
| 15 | Aditya | Shukla | Aditya Shukla | 20-05-2024 | 19-06-2024 |
| 16 | Electric loco shed Ajni training | Pravin Rastogi | Sanchit Subodh Kshirsagar | 18-12-2023 | 23-12-2023 |
| 17 | Electric loco shed Ajni training | Pravin Rastogi | Sahil vilas gaiki | 18-12-2023 | 23-12-2023 |
| 18 | Electric loco shed Ajni training | Pravin Rastogi | Sarthak Aswar | 18-12-2023 | 23-12-2023 |
| 19 | Vocation Training | MAHAGENCO koradi training centre | Reena Bodele | 11-12-2023 | 05-09-2024 |
Short-Term Internships done by students (2024-25)
| Sr. No. | Title of Program | Organised BY | Name of Participants | Start Date | Completion Date |
| 1 | Catia | G2G innovation in collaboration with mechanical engineering department | Anandi prashant pidadi | 15-06-2025 | 15-07-2025 |
| 2 | G2G Innovation Catia | G2G innovation in collaboration with mechanical engineering department | Karishma Sikdar | 15-06-2025 | 16-07-2025 |
| 3 | G2G Innovation – Catia V5 training | G2G innovation in collaboration with mechanical engineering department | Nandini Channe | 15-06-2025 | 16-07-2025 |
| 4 | Catia | G2G innovation in collaboration with mechanical engineering department | Pooja Thakre | 15-06-2025 | 15-07-2025 |
| 5 | G2G innovation:Catia V5 | G2G innovation in collaboration with mechanical engineering department | Riya Prabhakar Parate | 15-06-2025 | 15-07-2025 |
| 6 | G2G Catia V5 | G2G innovation in collaboration with mechanical engineering department | Sayali Gajbhiye | 16-06-2025 | 15-07-2025 |
| 7 | Offline internship works on the inspection line and cnc machine and Study of Gd&t | Aerocom Automotives PVT ltd MIDC nagpur in collaboration with mechanical engineering department | Sayali Gajbhiye | 16-06-2025 | 15-07-2025 |
| 8 | G2G innovation Catia V5 | G2G innovation in collaboration with mechanical engineering department | Sudhanshi Meshram | 16-06-2025 | 15-07-2025 |
| 9 | G2G innovation – Catia | G2G innovation in collaboration with mechanical engineering department | Suhani Khandait | 16-06-2025 | 15-07-2025 |
| 10 | G2G CATIA V5 | G2G innovation in collaboration with mechanical engineering department | Tejal choudhari | 16-06-2025 | 15-07-2025 |
| 11 | Catia v5 | G2G innovation in collaboration with mechanical engineering department | Urvi Thakre | 16-06-2025 | 16-07-2025 |
| 12 | G2G innovation | G2G innovation in collaboration with mechanical engineering department | Sushama kadam | 16-06-2025 | 16-07-2025 |
| 13 | Catia V5 training | G2G Innovation, Pune in collaboration with mechanical engineering department | Abhishek Deshmukh | 16-06-2025 | 16-07-2025 |
| 14 | One month internship in catia v5 at G2G | G2G UNNOVATION in collaboration with mechanical engineering department | Aditya Bokde | 15-06-2025 | 16-07-2025 |
| 15 | Short term Summer Internship | Tacit Engineering Private Limited, MIDC Hingna, Nagpur in collaboration with mechanical engineering department | Advait Ravindra Varadpande | 16-06-2025 | 15-07-2025 |
| 16 | One month internship in design v5 catia | G2G innovation | Anuj Ladukar | 15-06-2025 | 15-07-2025 |
| 17 | Catia V5 | G2G innovation LLP, pune | Aryan Avinash Sawai | 15-06-2025 | 15-07-2025 |
| 18 | CATIA Internship | G2G innovation in collaboration with mechanical engineering department | Atharva Parate | 15-06-2025 | 15-07-2025 |
| 19 | Catia | G2G innovation in collaboration with mechanical engineering department | Ayush Dakhiram Darwate | 16-06-2025 | 15-07-2025 |
| 20 | G2G | G2G innovation in collaboration with mechanical engineering department | Bhushan Nasre | 15-06-2025 | 16-07-2025 |
| 21 | 3D Modeling & Design Using CATIA V5 | G2G PUNE in collaboration with mechanical engineering department | Chetan hole | 16-06-2025 | 15-07-2025 |
| 22 | G2G innovation | G2G in collaboration with mechanical engineering department | Chiranjit Santosh Suryawanshi | 15-06-2025 | 16-07-2025 |
| 23 | One month internship in catia V5 | G2G innovation LLP, Pune in collaboration with mechanical engineering department | Harsh Bali | 16-06-2025 | 15-07-2025 |
| 24 | One month internship in catiya v5 | G2G innovation in collaboration with mechanical engineering department | Karan Sonone | 16-06-2025 | 15-07-2025 |
| 25 | CATIA V5 | G2G innovation in collaboration with mechanical engineering department | Kartik sudke | 15-06-2025 | 15-07-2025 |
| 26 | G2G inovation | G2G innovation in collaboration with mechanical engineering department | Kashyap Vinod Kamble | 15-06-2025 | 15-07-2025 |
| 27 | Catia v5 | G2G innovation in collaboration with mechanical engineering department | Ketan morey | 15-06-2025 | 15-07-2025 |
| 28 | G2G INNOVATION CATIA PRG | G2G AHEMDABAD in collaboration with mechanical engineering department | Khushant kumre | 15-06-2025 | 15-07-2025 |
| 29 | G2G innovation | G2G innovation in collaboration with mechanical engineering department | Krushna Giram | 15-06-2025 | 15-07-2025 |
| 30 | Catia v5 | G2G innovation in collaboration with mechanical engineering department | Kunal Rode | 15-06-2025 | 15-07-2025 |
| 31 | CATIA v5 | G2G innovation in collaboration with mechanical engineering department | Nayan wagh | 15-06-2025 | 15-07-2025 |
| 32 | G2G INNOVATION | G2G innovation in collaboration with mechanical engineering department | Nishant Thamke | 15-06-2025 | 15-07-2025 |
| 33 | Catia | G2G innovation in collaboration with mechanical engineering department | Nishid Vijay Shende | 16-06-2025 | 15-07-2025 |
| 34 | Catia foundation | G2G innovation in collaboration with mechanical engineering department | Ojas Gode | 16-06-2025 | 15-07-2025 |
| 35 | G2g Innovation | G2G innovation in collaboration with mechanical engineering department | Priyanshu Turselwar | 15-06-2025 | 15-07-2025 |
| 36 | 3D Modeling & Design Using CATIA V5 | G2G innovation in collaboration with mechanical engineering department | PAVEL SAMANTA | 16-06-2025 | 15-07-2025 |
| 37 | Catia v5 | G2G innovation in collaboration with mechanical engineering department | Pushpak Gajanan Durge | 15-06-2025 | 15-07-2025 |
| 38 | Catia | G2G innovation in collaboration with mechanical engineering department | Pushpak Gajanan Durge | 16-06-2025 | 15-07-2025 |
| 39 | One month internship in catia v5 | G2G innovation in collaboration with mechanical engineering department | Rishikesh C. Nerkar | 16-06-2025 | 15-07-2025 |
| 40 | G2G | G2G innovation in collaboration with mechanical engineering department | Sahil M Jadhao | 15-06-2025 | 16-07-2025 |
| 41 | CATIA V5 | G2G innovation in collaboration with mechanical engineering department | Sai S. Ghaywankar | 16-06-2025 | 16-07-2025 |
| 42 | 3D Modeling & Design Using CATIA V5 | G2G innovation in collaboration with mechanical engineering department | Sarthak Jaiswal | 16-06-2025 | 15-07-2025 |
| 43 | One Month Internship in CATIA V5 | G2G innovation in collaboration with mechanical engineering department | Samyak Anand Suryawanshi | 16-06-2025 | 15-07-2025 |
| 44 | Catia v5 Internship | G2G innovation in collaboration with mechanical engineering department | Shashwat Sawai | 16-06-2025 | 0202-07-15 |
| 45 | One month internship in design V5 | G2G innovation in collaboration with mechanical engineering department | Soham Nerkar | 15-06-2025 | 15-07-2025 |
| 46 | One Month Internship in Design CATIA V5 | G2G innovation in collaboration with mechanical engineering department | Suyog Prakash Badwaik | 16-06-2025 | 15-07-2025 |
| 47 | CATIA | G2G innovation in collaboration with mechanical engineering department | Utkarsh Jagzape | 15-06-2025 | 15-07-2025 |
| 48 | One Month Internship in Design CATIA V5 | G2G innovation in collaboration with mechanical engineering department | Utkarsh khedikar | 16-06-2025 | 15-07-2025 |
| 49 | CATIA V5 | G2G innovation in collaboration with mechanical engineering department | Vidhnesh Gedam | 16-06-2025 | 15-07-2025 |
| 50 | One month internship in Design CATIA V5 | G2G innovation in collaboration with mechanical engineering department | Sudesh Deshmukh | 16-06-2025 | 15-07-2025 |
| 51 | One month internship in Catia v5 | G2G innovation LLP Pune in collaboration with mechanical engineering department | Bhavika sathawane | 16-06-2025 | 15-07-2025 |
| 52 | 1 month internship in Catia v5 | G2G Innovation Pune in collaboration with mechanical engineering department | Jidnyasa Somankar | 16-06-2025 | 15-07-2025 |
| 53 | Catia | G2g innovation | Kalyani Belorkar | 16-06-2025 | 15-07-2025 |
| 54 | G2g-Innovation | Catia V5 Internship | Khushi Ajay Thote | 16-06-2025 | 15-07-2025 |
| 55 | Catia | G2G innovation in collaboration with mechanical engineering department | Nikita Navrange | 15-06-2025 | 15-07-2025 |
| 56 | MasterCam | IGTR Nagpur | Prachi Chhagan Tekam | 16-06-2025 | 21-07-2025 |
| 57 | Catia | G2G innovation in collaboration with mechanical engineering department | Riddhi Agrawal | 15-06-2025 | 15-07-2025 |
| 58 | Master CAM | IGTR in collaboration with mechanical engineering department | Trupti krushna khobragade | 16-06-2025 | 21-07-2025 |
| 59 | G2G Innovation | G2G innovation in collaboration with mechanical engineering department | Yashasvi Karhade | 15-06-2025 | 15-07-2025 |
| 60 | One month internship cad tool – CATIA V5 | G2G innovation in collaboration with mechanical engineering department | Abhay Bhotmange | 16-06-2025 | 15-07-2025 |
| 61 | G2G Catia | G2G innovation in collaboration with mechanical engineering department | Akshad pochampalliwar | 16-06-2025 | 15-07-2025 |
| 62 | Catia V5 | G2G innovation in collaboration with mechanical engineering department | Aman Manoj Bangre | 16-06-2025 | 15-07-2025 |
| 63 | G2G innovation catia training | G2G innovation in collaboration with mechanical engineering department | ANEESH C DEO | 16-06-2025 | 15-07-2025 |
| 64 | Python developer | Codec technology | Aniket Santosh shinde | 16-06-2025 | 15-07-2025 |
| 65 | Catia V5 | G2G innovation in collaboration with mechanical engineering department | Atharva kangali | 16-06-2025 | 16-07-2025 |
| 66 | CATIA V5 | G2G innovation in collaboration with mechanical engineering department | Ayush Rangari | 16-06-2025 | 15-07-2025 |
| 67 | Catia V5 | G2G innovation in collaboration with mechanical engineering department | Ayush Dilip Edatkar | 16-06-2025 | 15-07-2025 |
| 68 | CATIA | Indo German Tool Room in collaboration with mechanical engineering department | Mayank Doye | 15-07-2024 | 20-09-2025 |
| 69 | Catia V5 | G2G innovation in collaboration with mechanical engineering department | Greeshm Charde | 16-06-2025 | 15-07-2025 |
| 70 | Offline Internship | Aerocom automotives PVT. LTD.in collaboration with mechanical engineering department | Hrishikesh raj | 15-06-2025 | 15-07-2025 |
| 71 | 1 month Internship in Catia V5 | G2G Innovation LLP Pune | Jayesh Jambhale | 16-06-2025 | 15-07-2025 |
| 72 | G2G CATIA V5 | G2G innovation in collaboration with mechanical engineering department | Karan Suresh Chavhan | 16-06-2025 | 15-07-2025 |
| 73 | CATIA V5 | G2G innovation in collaboration with mechanical engineering department | Krish Shhebrao Jadhao | 16-06-2025 | 15-07-2025 |
| 74 | 1 month internship | G2G innovation in collaboration with mechanical engineering department | Mohammed Ayan Ikram sheikh | 16-06-2025 | 15-07-2025 |
| 75 | Machinery Manufacturing | Dagoba Engineering | Mohd Muzammil R Shaikh | 16-06-2025 | 15-07-2025 |
| 76 | One Month Internship by G2G in Catia V5 | G2G innovation in collaboration with mechanical engineering department | Mohit Tirpude | 16-06-2025 | 15-07-2025 |
| 77 | Catia V5 | G2G innovation pune | Mrunmay Manik Keote | 16-06-2025 | 15-07-2025 |
| 78 | Catia v5 | G2G innovation in collaboration with mechanical engineering department | Nayan Nikhil Tatewar | 16-06-2025 | 15-07-2025 |
| 79 | One Month Internship In CATIA V5 | G2G INNOVATION LLP, PUNE in collaboration with mechanical engineering department | Nishant R Chavhan | 16-06-2025 | 15-07-2025 |
| 80 | Site survey and documentation of solar project | Novaun solar, Yavatmal in collaboration with mechanical engineering department | Om Chaudhari | 15-06-2025 | 15-07-2025 |
| 81 | 1month internship program | Sunny infraenginring pvt limt in collaboration with mechanical engineering department | Ninad Nitin Kulkarni | 16-06-2025 | 15-07-2025 |
| 82 | One month training program on catia v5 | G2G innovation pune in collaboration with mechanical engineering department | Pranav Damodar Itankar | 16-06-2025 | 15-07-2025 |
| 83 | Saboo plastics ptv.LTD | Saboo plastics pvt.LTD in collaboration with mechanical engineering department | Purab Jambhulkar | 16-06-2025 | 16-06-2025 |
| 84 | Catia V5 | G2G innovation in collaboration with mechanical engineering department | Raghav Govind Bharathi | 16-06-2025 | 15-07-2025 |
| 85 | Machine manufacturing | Dagoba Engineering | Rajat Anturkar | 16-06-2025 | 15-07-2025 |
| 86 | Catia V5 | G2G innovation in collaboration with mechanical engineering department | Rudresh Dharamdas Bokade | 16-06-2025 | 15-07-2025 |
| 87 | Catia v5 | G2G innovation in collaboration with mechanical engineering department | Saksham Muktewar | 16-06-2025 | 15-07-2025 |
| 88 | ONE MONTH INTERNSHIP IN CATIA V5 | G2G innovation in collaboration with mechanical engineering department | SANKET T WASNIK | 16-06-2025 | 15-07-2025 |
| 89 | Catia | G2G innovation in collaboration with mechanical engineering department | Satyam Shende | 16-06-2025 | 15-07-2025 |
| 90 | Saboo plastics Pvt. Ltd. | Saboo plastics Pvt. Ltd.in collaboration with mechanical engineering department | Savinay Meshram | 16-06-2005 | 16-07-2005 |
| 91 | Catia v5 | G2g_innovations in collaboration with mechanical engineering department | Shantanu mahesh kapkar | 16-06-2025 | 15-07-2025 |
| 92 | 1 month internship in Catia v5 | G2G innovation in collaboration with mechanical engineering department | Shivam Hatwar | 16-06-2025 | 15-07-2025 |
| 93 | G2g catia | G2G innovation in collaboration with mechanical engineering department | Shrawan keshao gaikwad | 16-06-2025 | 15-07-2025 |
| 94 | Internship for Machine learning | DIE AND MOULD WORKS | Shreyash Deepak Patil | 15-02-2025 | 15-05-2025 |
| 95 | training on Solid Works | Qubotron Electratag Technology | Soham Patankar | 16-05-2025 | 15-06-2025 |
| 96 | G2G Catia Training | G2G innovation in collaboration with mechanical engineering department | Swayam Vinayak Dethe | 16-06-2025 | 15-07-2025 |
| 97 | Catia software | G2G innovation in collaboration with mechanical engineering department | Tejas dahapute | 16-06-2025 | 15-07-2025 |
| 98 | Catia v5 | G2G innovation in collaboration with mechanical engineering department | Tushar Dilesh Bhimte | 16-06-2025 | 15-07-2025 |
| 99 | MCAM software | IGTR in collaboration with mechanical engineering department | Tushar vitthal yuvnate | 02-06-2025 | 23-07-2025 |
| 100 | MASTERCAM | Indo German tool room Nagpur in collaboration with mechanical engineering department | Uddesh Rajendra Gajbhiye | 02-06-2025 | 23-07-2025 |
| 101 | Catia V5 | G2G innovation in collaboration with mechanical engineering department | Vansh Narayani | 16-06-2025 | 15-07-2025 |
| 102 | Catia V5 | G2G innovation in collaboration with mechanical engineering department | Vansh Parag Gondane | 16-06-2025 | 15-07-2025 |
| 103 | Smart manufacturing | Visvesvaraya National Institute of Technology Nagpur (VNIT) in collaboration with mechanical engineering department | Vedant Rewatkar | 11-03-2025 | 24-04-2025 |
| 104 | Short Term Training Programme | Electric Loco Shed , Ajni , Nagpur in collaboration with mechanical engineering department | Yash Meshram | 08-01-2025 | 15-01-2025 |
| 105 | Catia V5 | G2G innovation in collaboration with mechanical engineering department | Vidhit pravin Dhopte | 16-06-2025 | 15-07-2025 |
| 106 | Catia V5 | G2G innovation in collaboration with mechanical engineering department | Vinay Mohite | 16-06-2025 | 15-07-2025 |
| 107 | One Month Internship -CATIA V5 Software | G2G innovation in collaboration with mechanical engineering department | Yash Avinash Meshram | 16-06-2025 | 15-07-2025 |
Student Participation
| Session | NPTEL/Coursera/Udemy/IIT | Publication | Workshop | Cultural/ Sports |
| 2025-26 | 51 | – | – | 03 |
| 2024-25 | 55 | 13 | 16 | 3 |
| 2023-24 | 294 | 16 | 14 | 17 |
| 2022-23 | 75 | 59 | 24 | 6 |
| STTP on Scilab, Python, C++ and Blender through The Spoken Tutorial, IIT Bombay (2021-2025) | ||||||
| Sr. No | Date of Exam | Course | Semester | No of Students appeared for Exam | No of Successful Students | Passing % |
| 1 | 11-11-2022 | Scilab | 7 | 165 | 116 | 70.30% |
| 2 | 12-11-2022 | Python | 5 | 170 | 156 | 91.76% |
| 3 | 23-01-2023 | Python | 3 | 106 | 46 | 43.39% |
| 4 | 24-01-2023 | Scilab | 3 | 106 | 60 | 56.60% |
| 5 | 11-04-2023 | C++ | 6 | 200 | 119 | 60% |
| 6 | 10-06-2023 | C++ | 4 | 132 | 86 | 69% |
| 7 | 10-11-2023 | Blender | 5 | 234 | 180 | 77% |
| 8 | 28-12-2023 | Blender | 3 | 128 | 86 | 67% |
| 9 | 15-05-2025 | Blender 2025 | 4 | 29 | 25 | 86% |
| Total | 1241 | 861 | 69.37% | |||
| S.N | Title of Programme | Organised by | Name of Participant | Exam date |
| 1 | Digital Manufacturing & Design Technology | Coursera | Joshi Akshita Parag | 20-11-2025 |
| 2 | Digital Manufacturing & Design Technology | Coursera | Kolhe Ashlesha Pramod | 20-11-2025 |
| 3 | Digital Manufacturing & Design Technology | Coursera | Ambokar Riya Girish | 21-11-2025 |
| 4 | Digital Manufacturing & Design Technology | Coursera | Khonde Atharva Sanjay | 20-11-2025 |
| 5 | Digital Manufacturing & Design Technology | Coursera | Urkude Ayush Vilas | 25-10-2025 |
| 6 | Digital Manufacturing & Design Technology | Coursera | Nagdeve Bhavesh Dipak | 07-10-2025 |
| 7 | Digital Manufacturing & Design Technology | Coursera | Harde Devendra Rajendra | 20-11-2025 |
| 8 | Digital Manufacturing & Design Technology | Coursera | Choudhary Mayur Prakash | 10-11-2025 |
| 9 | Digital Manufacturing & Design Technology | Coursera | Barapatre Sakshi Shivshankar | 20-11-2025 |
| 10 | Digital Manufacturing & Design Technology | Coursera | Sonkusare Dharmesh Vijay | 21-11-2025 |
| 11 | Digital Manufacturing & Design Technology | Coursera | Barapatre Mayur Umakant | 21-11-2025 |
| 12 | Digital Manufacturing & Design Technology | Coursera | Dange Pranav Nilkanth | 03-11-2025 |
| 13 | Digital Manufacturing & Design Technology | Coursera | Bhujade Sarvesh Satishrao | 20-11-2025 |
| 14 | Digital Manufacturing & Design Technology | Coursera | Tawale Yugant Harichandra | 20-11-2025 |
| 15 | Sensors and Sensor Circuit Design | Coursera | UTKARSH R. PARDHI | 14-11-2025 |
| 16 | Construction Project Management | Coursera | AMBARISH M.OGALE | 17-11-2025 |
| 17 | Introduction to Thermodynamics | Coursera | YASH S.BABDE | 08-10-2025 |
| 18 | AI for Mechanical Engineers | Coursera | MAYANK S KADBE | 08-11-2025 |
| 19 | SOLIDWORKS 3D FOR CAD EDUCATION | Coursera | VIDHIT P. DHOPTE | 12-11-2025 |
| 20 | Refrigeration and Air Conditioning | NPTEL | MAITRAY S.DHANVIJAY | 02-10-2025 |
| 21 | Principle of Hydraulic Machines and System Design | NPTEL | TUSHAR VITTHAL YUVNATE | 01-11-2025 |
| 22 | NPTEL | PRATIK K. BORKAR | 25-10-2025 | |
| 23 | Soft Skill | NPTEL | MAYANK V. BANSAL | 25-10-2025 |
| 24 | Understanding Incubation and Enterpreneur | NPTEL | AALHAD MOHAN JAT | 21-10-2025 |
| 25 | Labour Welfae and Industrial Relations | NPTEL | SUYOG P. BADWAIK | 01-11-2025 |
| 26 | Urbanization and Environment | NPTEL | KANISHK S. MISHRA | 21-09-2025 |
| 27 | Fundamentals of Manufacturing Processes | NPTEL | SAURABH D. SINGH | 02-11-2025 |
| 28 | Fundamentals of Manufacturing Processes | NPTEL | TUSHAR D. BHIMTE | 02-11-2025 |
| 29 | AIin Human Resource Management | NPTEL | MRUNALI G. BEHARE | 04-05-2025 |
| 30 | Principle of hydraulic and pneumatic systems | NPTEL | PRACHI CHHAGAN TEKAM | 01-11-2025 |
| 31 | Principle of Hydraulic Machine and System Design | NPTEL | TRUPTI K. KHOBRAGADE | 01-11-2025 |
| 32 | Understanding Incubation and Entrepreneurship | NPTEL | Satyam H. Shende | 26-10-2025 |
| 33 | Soft Skill | NPTEL | VANSH BAIS | 25-10-2025 |
| 34 | Understanding Incubation and Enterpreneur | NPTEL | KALYANI .K. BELORKAR | 26-10-2025 |
| 35 | Understanding Incubation and Entrepreneurship | NPTEL | MRUNMAY M. KEOTE | 26-10-2025 |
| 36 | Urbanization and Environment | NPTEL | HUMNOOR SINGH MARWAHA | 21-09-2025 |
| 37 | Fundamentals of Manufacturing Processes | NPTEL | JIDNYASA SUNIL SOMANKAR | 02-11-2025 |
| 38 | Enterpreneurship | NPTEL | MOHIT PRADEEP TIRPUDE | 25-10-2025 |
| 39 | Urbanization and Environment | NPTEL | Aryan Anil Sakhare | 21-09-2025 |
| 40 | Fundamentals of Manufacturing Processes | NPTEL | YASH A. MESHRAM | 02-11-2025 |
| 41 | Solar Energy Engineering and Technology | NPTEL | DIVYARATNA S. UKEY | 01-11-2025 |
| 42 | ENTREPRENEURSHIP | NPTEL | Veeraj Dehankar | 25-10-2025 |
| 43 | Understanding Incubation and Entrepreneurship | NPTEL | KHUSHAD BRAHMANKAR | 26-10-2025 |
| 44 | NPTEL | NPTEL | AVISHKAR .B. GHODKE | 30-09-2006 |
| 45 | SOLR ENGINEERING AND TECHNOLOGY | NPTEL | PREM SANJAY MAUDEKAR | 01-11-2025 |
| 46 | FUNDAMENTALS OF MANUFACTURING PROCESS | NPTEL | JAYESH MAHENDRA JAMBHALE | 02-11-2025 |
| 47 | MATERIAL PROCESSING (CASTING , FORMING AND WELDING) | NPTEL | SHIVAM P. HATWAR | 01-11-2025 |
| 48 | MATERIALS PROCESSING (CASTING , FORMING , WELDING) | NPTEL | ABHAY BHOTMANGE | 11-04-2025 |
| 49 | NPTEL: Partial Differential Equations | NPTEL | SAMYAK A. SURYAWANSHI | 01-11-2025 |
| 50 | HTML CSS AND JAVASCRIPT Course for UI/IX Designing | UDEMY | HIMANSHU RAMTEKE | 29-11-2025 |
| 51 | Machine Learning A-Z : AI PYTHON & R+CHATGPT Price | UDEMY | Siddheshwar Madne | 18-11-2025 |
| SN | Title of programme | Organized by | Name of participant | Dates |
| 1. | Soft Skills Development | IIT Kharagpur | Sayali Santosh Gajbhiye | 22-07-2024 |
| 2. | Soft Skill Development | IIT Kharagpur | Durgesh Jagdish Jibhkate | 22-07-2024 |
| 3. | The tradition of Mahabharata in Tamilnadu | IIT Madras | Kapkar Shantanu Mahesh | 02-07-2024 |
| 4. | The performance traditions of Mahabharata in Tamil Nadu | IIT Madras | Somankar Jidnyasa Sunil | 02-07-2024 |
| 5. | Soft skill development | IIT Kharagpur | Pochampalliwar Akshad Ravi | 22-07-2024 |
| 6. | Soft skill development | IIT Kharagpur | Gondane Vansh Parag | 22-07-2024 |
| 7. | Technical Communication for Engineers | IIT | Mohit Tirpude | 20-07-2024 |
| 8. | Brief introduction to psychology | IIT Kanpur | Mohite Vinay Pankaj | 29-07-2024 |
| 9. | Sports and Performance Nutrition | IIT | Dethe Swayam Vinayak | 19-08-2024 |
| 10. | Sport and performance Nutrition | IIT | Bharathi Raghav Govind | 19-08-2024 |
| 11. | Soft Skill Development | IIT Kharagpur | Shende Satyam Haridas | 01-10-2024 |
| 12. | Soft skill development | IIT Kharagpur | Belorkar Kalyani Kishor | 01-10-2024 |
| 13. | Brief Introduction to Psychology – IIT Kanpur | IIT | Yash Avinash | 29-07-2024 |
| 14. | Sports and performance nutrition | IIT | Tatewar Nayan Nikhil | 19-08-2024 |
| 15. | Sports and performance nutrition | IIT | Dahapute Tejas Rajesh | 15-07-2024 |
| 16. | Tayota Production System | IIT | Rangari Ayush Jogendra | 19-08-2024 |
| 17. | Soft skill development | IIT Kharagpur | Hrishikesh Raj | 01-10-2024 |
| 18. | Automation In Manufacturing | IIT Guwahati | Sonkusare Dharmesh Vijay | 14-06-2024 |
| 19. | Thermal Operations in Food Process Engineering: Theory and Applications | IIT Kharagpur | Pise Abhas Dhanraj | 22-07-2024 |
| 20. | Basics of Mechanical Engineering – 1 | IIT | Biranchi Mahto | 22-07-2024 |
| 21. | Automation in Production System and Management | IIT Kharagpur | Khandwe Shantanu Anil | 22-07-2024 |
| 22. | Automation in production systems and management | IIT Kharagpur | Bhiwgade Shatayu Anil | 15-07-2024 |
| 23. | Automation in production systems and management | IIT Kharagpur | Meshram Ruchika Rajesh | 26-07-2024 |
| 24. | AI in Human Resource Management | IIT | Nandini Channe | 03-05-2025 |
| 25. | United Nations Sustainable Development Goals (UN SDGs) | IIT | Satyam Shende | 04-05-2025 |
| 26. | United Nations Sustainable Development Goals (UN SDGs) | IIT | Karan Suresh Chavhan | 04-05-2025 |
| 27. | United Nations Sustainable Development Goals(UN SDGs) | IIT | Swayam Dethe | 04-05-2025 |
| 28. | United Nations Sustainable Development Goals(UN SDGs) | IIT | Kalyani Kishor Belorkar | 04-05-2025 |
| 29. | Psychology Of Stress, Health And well-Being | IIT | Aneesh Chandrashekhar Deo | 11-05-2025 |
| 30. | Psychology Of Stress, Health And well-Being | IIT | Aman Bangre | 11-05-2025 |
| 31. | Psychology Of Stress, Health And well-Being | IIT | Jidnyasa Somankar | 11-05-2025 |
| 32. | Psychology Of Stress, Health And well-Being | IIT | Vansh Narayani | 11-05-2025 |
| 33. | Psychology Of Stress, Health And well-Being | IIT | Purab Nitin Jambhulkar | 11-05-2025 |
| 34. | Psychology Of Stress, Health And well-Being | IIT | Vinay Mohite | 11-05-2025 |
| 35. | Psychology Of Stress, Health And well-Being | IIT | Vansh Gondane | 11-05-2025 |
| 36. | Psychology Of Stress, Health And well-Being | IIT | Tushar Dilesh Bhimte | 11-05-2025 |
| 37. | Psychology Of Stress, Health And well-Being | IIT | Savinay Shashikant Meshram | 11-05-2025 |
| 38. | Psychology Of Stress, Health And well-Being | IIT | Rajat Rajesh Anturkar | 11-05-2025 |
| 39. | Psychology Of Stress, Health And well-Being | IIT | Mohd Muzammil Shaikh | 11-05-2025 |
| 40. | Product Design and Manufacturing | IIT | Mrunmay Manik Keote | 10-05-2025 |
| 41. | Product Design and Manufacturing | IIT | Bhavika Vijay Sathawane | 10-05-2025 |
| 42. | Education for Sustainable Development | IIT | Pranav Damodhar Itankar | 10-05-2025 |
| 43. | Advanced Machining Processes | IIT | Trupti Krushna Khobragade | 03-05-2025 |
| 44. | Advanced Machining Processes | IIT | Prachi Chhagan Tekam | 03-05-2025 |
| 45. | Inspection And Quality Control In Manufacturing | IIT | Mohit Tirpude | 03-05-2025 |
| 46. | Global Marketing Management | IIT | Yash Meshram | 03-05-2025 |
| 47. | English Language for competitive Exams | IIT | Jayesh Jambhale | 04-05-2025 |
| 48. | Education for Sustainable Development | IIT | Tejas Dahapute | 04-05-2025 |
| 49. | Education for Sustainable Development | IIT | Nayan Tatewar | 04-05-2025 |
| 50. | Education for Sustainable Development | IIT | Greeshm Suresh Charde | 04-05-2025 |
| 51. | Education for Sustainable Development | IIT | Akshad Ravi Pochampalliwar | 04-05-2025 |
| 52. | Business Fundamentals for Entrepreneurs | IIT | Mahesh Bhagvandas Chandak | 03-05-2025 |
| 53. | Advanced Machining Processes | IIT | UDDESH RAJENDRA GAJBHIYE | 03-05-2025 |
| 54. | AI in Human Resource Management | IIT | MRUNALI GAJANAN BEHARE | 03-05-2025 |
| 55. | Psychology Of Stress, Health And Well-Being | IIT | KHUSHANT ARUN KUMRE | 11-05-2025 |
| SN | Title of programme | Organized by | Name of participant | Dates |
| 1. | Introduction to thermodynamics:transferring energy from here to There | Coursera | Mangesh Ramkisan Dhurve | 2 weeks |
| 2. | Java 11 essentials | Infosys | Akshita Parag Joshi | 2 weeks |
| 3. | Java 11 essentials | Infosys | Himanshu Rajendra Sarode | 2 weeks |
| 4. | Java 11 essential | Infosys | Neeraj Tulsidas Chamate | 2 weeks |
| 5. | Sketchers and CAD modeling using Solidworks (Yeshwantrao Chavan College of engineering and technology) C++ (Tim Buchalka’s Learn Programming Academy – Udemy) | UDEMY;VAC | Bhavesh Dipak Nagdeve | VAC – 30 hrs , C++ – 45 hrs |
| 6. | Coursera | Coursera | Rasika Dnyaneshwar Likhar | 1month |
| 7. | Java 11 essential | Infosys | Dhanashree Manish Watkar | 28 hrs |
| 8. | 1) BASICS OF PYTHON. 2) DATA BASE MANAGEMENT SYSTEM. (INFOSYS SPRINGBOARD) | INFOSYS SPRINGBOARD | Jayant Dipak Mondal | 20 hours |
| 9. | 1)BASICS OF PYTHON 2)DATA MANAGEMENT SYSTEM. INFOSYS SPRINGBOARD | INFOSYS SPRINGBOARD | Jayant Dipak Mondal | 20 hours |
| 10. | Java 11 Essentials | Infosys | Maitray Sanjay Dhanvijay | 6 months |
| 11. | Java 11 essentials from infosys | Infosys | Aman Ramchandra Badkhal | 2 weeks |
| 12. | Java11 | NPTEL;UDEMY | Aditya Umesh Shukla | 2 weeks |
| 13. | Infosys | Infosys | Aaradhya Rajendra Londhe | 2 weeks |
| 14. | Java 11 essential | Infosys | Mohit Vilas Bhise | 28 |
| 15. | Java 11 essentials | Infosys | Gaurav Chandrakant Kshirsagar | 28 |
| 16. | Java 11 essential | Infosys | Dipesh Bhupendra Jogi | 28hours |
| 17. | Java 11 essencials | Infosis | Gaurav Gajanan Dandage | 28 hours |
| 18. | Java 11 essential | NPTEL;Coursera;VAC | Atharva Harish Chavan | 1 month |
| 19. | Python | UDEMY | Kausal Vijay Mishra | 4 weeks |
| 20. | Introduction to microsoft excel. | Coursera | Mohanish Rajesh Pansare | 6 weeks |
| 21. | Java 11 essentials | Infosys | Aman Ramchandra Badkhal | 2 weeks |
| 22. | Qualcomm wireless academy | Coursera | Roshan Jadhav | 4 Weeks |
| 23. | Basics of linear algebra by using python | INFOSYS | Kunal Tularam Bhure | 20 hours |
| 24. | Linear algebra by using python | Infosis | Tejas Ganesh Barapatre | 20hours |
| 25. | Course-CLOUD COMPUTING and Course organisation -COURSERA | Coursera | Atharva Vinod Thorane | 4 week |
| 26. | Linear algebra by using python | Infosis | Tejas Ganesh Barapatre | 20 hours |
| 27. | Basics of linear algebra using python | Infosys | Yash Sanjay Bode | 1.5 week |
| 28. | Java 11 essential | Infosys | Vedant Sanjay Dhopre | 28hours |
| 29. | Java 11 essentials | Infosys | Riya Girish Ambokar | 28 hours |
| 30. | Infosys Spring Board 1) Basics of python 2)data base management and system part1 | INFOSYS SPRINGBOARD | Jayant Dipak Mondal | 3 weeks |
| 31. | Tirumala Arohi | Infosys | Dikshant Dilip Khobragade | 1 week |
| 32. | Java 11 Essential, Infosys | Infosys | Ambarish Mahendra Ogale | 28 hours |
| 33. | Thirumala Arohi | Infosys | Dikshant Dilip Khobragade | 1 week |
| 34. | 1) BASICS OF PYTHON 2)DATA BASE MANAGEMENT SYSTEM PART 1 (INFOSYS SPRINGBOARD) | INFOSYS SPRINGBOARD | Jayant Dipak Mondal | 4 weeks |
| 35. | COSMO CLENCH | Techfest IIT BOMBAY | Siddhesh Sanjay Bodhare | 1 day |
| 36. | Couresera – introduction of python | Coursera | Shaurya Ramesh Bhole | 5 week |
| 37. | Java 11 essential – Infosys | Infosys Springboard | Pranav Nilkanth Dange | 28 hrs 58 min |
| 38. | Java 11 Essentials | Infosys Spring board | Pratik Kishor Borkar | 28 hours 58 min |
| 39. | PHP MASTERS | UDEMY | Pranay Moreshwar Rotke | 37 hours |
| 40. | Java 11 Essentials & Infosys Springboard | Infosys springboard | Rutuj Umesh Patil | 4 |
| 41. | Infosys spring board | Infosys | Om Rajesh Mane | 28 hr |
| 42. | Java essential 11 | Infosys | Meshram Bhavesh Rajesh | 8 weeks |
| 43. | Java 11 Essential | Infosys Springboard | Pratik Kishor Borkar | 28 hours 56 min |
| 44. | Introduction to java | Coursera | Priyanshu Bandu Tabhane | 2-3 weeks |
| 45. | Java 11 essential by Infosys springboard | Infosys springboard | Spandan Sushant Das | 4 weeks |
| 46. | Blenders | Spoken tutorial | Om Ajay Rajulwar | 8 weeks |
| 47. | Blender_ spoken tutorial | Spoken Tutorial | Pranav Nilkanth Dange | 8 weeks |
| 48. | Yashvantrav chavan college of engineering | NPTEL;VAC;Blender | Nikhil Shyam Khandel | Four weeks |
| 49. | Java 11 essential | Infosys springboard | Prem Ravindra Bedarkar | 28 hours 58 min |
| 50. | Blender software by IIT BOMBAY | IIT BOMBAY | Piyush Mahendra Nandeshwar | 8 weeks |
| 51. | Blender | NPTEL | Pranay Moreshwar Rotke | 8 weks |
| 52. | Blender,IIT bombay | Spoken tutorial | Om Ajay Rajulwar | 8 weeks |
| 53. | Java 11 essential | Infosys springboard | Spandan Sushant Das | 4 weeks |
| 54. | Java 11 Essential | Infosys Springboard | Pratik Kishor Borkar | 4 weeks |
| 55. | Blender Training | IIT BOMBAY | Piyush Mahendra Nandeshwar | Blender By IIT BOMBAY |
| 56. | JAVA 11 ESSENTIAL, Infosys | Infosys Spring board | Sushant Dinesh Fulzele | 12 weeks |
| 57. | Java 11 Essential | Infosys Springboard | Pratik Kishor Borkar | 4 weeks |
| 58. | Java 11 Essential | Infosys Springboard | Pratik Kishor Borkar | 4 weeks |
| 59. | Java 11 | Infosys springboard | Yash Sanjay Mahale | 4 weeks |
| 60. | About microsoft excel. | Coursera | Mohanish Rajesh Pansare | 16 weeks |
| 61. | About microsoft excel. | Coursera | Mohanish Rajesh Pansare | 16 weeks |
| 62. | The complete python Developer | UDEMY | Aditya Deepak Tayade | 30.5 hours |
| 63. | Google ads for beginners bycoursera project network | Coursera | Dhruv Mohan Charde | 4 weeks |
| 64. | FEM Linear, Nonlinear Analysis & Post- Processing | Coursera | JADHAV ROSHAN PRABHAKAR | 3 Week |
| 65. | Name-Java Programming Fundamentals, Organisation-Infosys | Infosys | Ambarish Mahendra Ogale | Total 32 hours course |
| 66. | Solidworks by udemy | UDEMY | Mayur Prakash Choudhary | 15 weeks |
| 67. | Solidworks by udemy | UDEMY | Mayur Prakash Choudhary | 3 months |
| 68. | Coursera cloud computing | Coursera | Himanshu Rajendra Sarode | 3 week |
| 69. | Developing AI Applications with Python and Flask – coursera. | Coursera;VAC | Ayush Vilas Urkude | 4 weeks ( 28 days ) |
| 70. | Basics of computational tools by Department of Mechanical Engineering | UDEMY | Mayur Prakash Choudhary | 4 weeks |
| 71. | PROGRAMMING USING JAVA | Infosys Springboard | Jayant Dipak Mondal | 4 Hours |
| 72. | Java 11 essentials | Infosys | Bhavesh Rajesh Meshram | 1 month |
| 73. | Introduction to Data Science By Infosys Springboard | Infosys Springboard | Sankalp Dharmendra Gajwe | 4 weeks |
| 74. | NPTEL – Python for Data Science, VAC – Basics of Computational Tools | NPTEL;VAC | Taranpreet Singh Rajinder Singh Kalsi | 4 weeks |
| 75. | Introduction to Data Science by Infosys Springboard | Infosys Springboard | Sankalp Dharmendra Gajwe | 4 Weeks |
| 76. | Blenders | Spoken Tuturials | Ishant Sidharth Dhoke | 02/10/2023 – 03/11/2023 |
| 77. | BLENDER SOFTWARE TRAINING(IIT BOMBAY) | SPOKEN TUTORIAL IIT BOMBAY | Vedang Shriram Paralkar | 02-10-2023 TO 03-11-2023 |
| 78. | Fundamentals of material processing | NPTEL | Sania Sanjay Ramteke | 8weeks |
| 79. | BLENDER Training course organised by IIT Bombay | IIT Bombay | Shubham Sudhakar Kamble | 2-10-2023 to 3-11-2023 |
| 80. | Python (Durga soft technology ) | UDEMY | Ayush Nitin Jambhulkar | (114 hrs) 3 month |
| 81. | Engineering Metrology | NPTEL | Abhas Dhanraj Pise | 12 |
| 82. | Engineering Metrology,IIT KANPUR | NPTEL | Abhas Dhanraj Pise | 12 |
| 83. | Blender | Spoken tutorial, IIT Bombay | Umang Dilip Somkuwar | 8 weeks |
| 84. | Blender | Spoken tutorial, IIT Bombay | Umang Dilip Somkuwar | 8 weeks |
| 85. | Blender | Spoken tutorial IIT Bombay | Umang Dilip Somkuwar | 4 |
| 86. | Blender | IIT BOMBAY | Om Mangesh Jaikumar | 2-10-2023 to 3-11-2023 |
| 87. | Blender , IIT BOMBAY | IIT BOMBAY | Bhagvat Balaji Ware | 2/10/23-3/11/23 |
| 88. | python course on UDEMY, Value Added Course on “3D Printing & Laser Cutting†, VAC by IIT bombay of blender | UDEMY;VAC | Rajat Ramakant Gillurkar | 4 week |
| 89. | Blender by IIT bombay | Coursera | Sahil Suresh Gaikwad | 02-10-2023 to 03-11-2023 |
| 90. | Python | UDEMY | Sahil Deonath Khadilkar | 4 week |
| 91. | Blender | Spoken tutorial IIT Bombay | Umang Dilip Somkuwar | 4 |
| 92. | Work System Design,iit roorkee | NPTEL | Aniket Dnyaneshwar Chaudhari | 12 weeks |
| 93. | Spoken Tutorial ( IIT BOMBAY ) | IIT BOMBAY | Om Mangesh Jaikumar | 45233 |
| 94. | Blender – vac ycce by Pratik lande sir and IBM what is data science – coursera | Coursera;VAC | Pratham Prasanna Thorat | (Vac)Blender :- 2/10/2023 to 3/11/2023 and (Coursera) IBM what is data science? – 8 weeks |
| 95. | Mechanics of machining by IIT Guwahati | NPTEL | Abhas Dhanraj Pise | 8 weeks |
| 96. | Procurement basics | Coursera | Paras Rana Singh Saini | 1 week |
| 97. | Procurement Basics | Coursera | Atharva Mohan Pathak | 4 week |
| 98. | Introduction to data science on Python | Coursera | Vaibhav Sunit Kamble | 4 Weeks |
| 99. | Foundations of Cybersecurity from coursera. | Coursera | Apurva Vijay Urkude | 3 months . 25th Jan 2024 to 22 April 2024. |
| 100. | AutoCAD | UDEMY | Vineet Subhash Jagdale | 4 Weeks |
| 101. | AutoCAD | UDEMY | Vineet Subhash Jagdale | 4 Weeks |
| 102. | Strategic procurement and sourcing conclusions | Coursera | Paras Rana Singh Saini | 8 week |
| 103. | Strategic Procurement and Sourcing Conclusions | Coursera | Atharva Mohan Pathak | 8-12 weeks |
| 104. | Data structures and algorithms using python conducted by Infosys springboard | Infosys springboard | Himanshu Prabhudas Sonewane | 8 weeks |
| 105. | Coursera | Coursera | Aniket Narendra Sonone | 4 week |
| 106. | Supplier Management by Coursera | Coursera | Madhura Pramod Wankhade | 4 weeks |
| 107. | Aryan Mene | Coursera | Aryan Rajendra Mene | 12 weeks ( 3 months) |
| 108. | Artificial Intelligence and Machine Learning Fundamentals | Infosys | Bhumika Chandrashekhar Gedam | 2 weeks |
| 109. | Strategic procurement and sourcing conclusion(coursera) | Coursera | Ayush Nitin Jambhulkar | 8-12 weeks |
| 110. | Procurement Basics | Coursera | Ishant Sidharth Dhoke | 12 |
| 111. | Java programming solving problem with software | Coursera | Sandesh Prakash Shende | 48 hours |
| 112. | Strategic Procurement and Sourcing Conclusions By coursera | Coursera | Viraj Sanjay Bhoge | 12 weeks |
| 113. | Strategic procurement and sourcing conclusions | Coursera | Amogh Mahesh Wadikhaye | 12 weeks |
| 114. | CIM, electric habirit VAC, Basics of Computational Tools VAC | NPTEL;VAC | Biranchi Bhawesh Mahto | 12week, 4week |
| 115. | Graphic Design , udemy | UDEMY | Sanika Satish Bhuyar | 10 total hours, date of completion -13 /4/2024 |
| 116. | Noice Management and Control | NPTEL | Rajat Jagdish Paigwar | 12 weeks |
| 117. | Robotics: Estimation and Learning, Robotics: Mobility conducted by Penn University of Pennsylvania | Coursera | Vedant Ganesh Lakhe | 4 Weeks, 4 weeks |
| 118. | Supply chain management | Coursera | Tanmay Sunil Thakre | 8-12 weeks |
| 119. | “SUPPLY CHAIN MANAGEMENT” by Rutgers the State University of New Jersey and offered through Coursera | Coursera | Prajwal Prakash Zodape | 45634 |
| 120. | Extensive Python Fundamentals (udemy) and What Is Data Science (IBM Coursera) | Coursera;UDEMY | Pratham Prasanna Thorat | 4weeks and 44 hours |
| 121. | Supply chain management | Coursera | Kaustubh Purushottam Barewar | 12 |
| 122. | Robotics Estimation and learning | Coursera | Navneet Madhav Thakre | 4 weeks 4 weeks |
| 123. | Introduction to Bigdata by University of California san Diego | Coursera | Sanskar Avinash Chinnawar | 8 weeks |
| 124. | Introduction to big data by University of California San Diego | Coursera | Prathmesh Murlidhar Bagwale | 8 weeks |
| 125. | Cybersecurity Solutions and Microsoft Defender (Coursera), Extensive Python Fundamentals (UDEMY) | Coursera;UDEMY | Rishi Nirav Shukla | 4 weeks + 4 weeks |
| 126. | Extensive pathon and fundamentals from udemy & Robotics: Estimation and Learning by Coursera | Coursera;UDEMY | Satvik Dipak Diwate | 4 weeks |
| 127. | Extensive python fundamentals | UDEMY | Shreyash Martand Girhepunje | 4. Week |
| 128. | 1)Data Structures and OOP with C++ BY OCSALY Academy , 2)C++ Code Like you are in MATRIX BY OCSALY Academy, 3)Google Analytics 4 (GA4) BY Anton Voroniuk, 4)Coding Basics: Gentle Intro to Computer Programming BY SDE Arts by Ahmed EL Mohandes | UDEMY | Shreejit Jitendra Demapure | 4 weeks |
| 129. | ROBOTICS- MOBILITY AND ROBOTICS ESTIMATION | Coursera | Kohad Kamod Dinanath | 4 weeks |
| 130. | Preparing to manage human resources | Coursera | Sahil Deonath Khadilkar | 12 week |
| 131. | Advanced Robotics | NPTEL | Shatayu Anil Bhiwgade | 12 weeks |
| 132. | Data Structures and Algorithms in C | Infosys Springboard | Jayesh Suresh Giri | 1 month |
| 133. | EXTENSIVE PYTHON FUNDAMENTALS / UDEMY | UDEMY | Madhur Shrikant Natekar | 4 WEEKS |
| 134. | What is the mind and what is artificial intelligence | Coursera | Sahil Suresh Gaikwad | 8 weeks |
| 135. | Silab spoken tutorial | IIT Bombay | Ankit Sushil Thakur | . |
| 136. | MATLAB AND PYTHON | Coursera;UDEMY | Kohad Kamod Dinanath | 4 weeks + 4 weeks |
| 137. | Robotics: Estimation and learning & Mobility | Coursera | Mogalla Seshasai Sowrabh | 4 weeks, 4 weeks |
| 138. | Programming with javascript | Coursera;Meta | Jayesh Suresh Giri | 1 month |
| 139. | Coursera | Coursera | Geetesh Ashokrao Shinde | 5 |
| 140. | Work system design by IIT Roorkee | NPTEL | Aniket Dnyaneshwar Chaudhari | 12 |
| 141. | Work system Design, NPTEL | NPTEL | Aniket Dnyaneshwar Chaudhari | 12 |
| 142. | 1..What is Data Science ? | Coursera | Sarthak Vilasrao Aswar | 4 week |
| 143. | What is data science , | Infosys | Sanchit Subodhrao Kshirsagar | 4 week |
| 144. | Programming Fundamentals…Duke University | Coursera | Sarthak Vilasrao Aswar | 8 week |
| 145. | The Complete JavaScript Course 2023:From Zero to Expert! | UDEMY | Abhishek Anil Kanoje | 3-4 week |
| 146. | Programming fundamentals Duke University | Coursera | Sanchit Subodhrao Kshirsagar | 8 week |
| 147. | Advance Robotics ,IIT Kanpur | NPTEL | Piyush Ramesh Bajirao | 12 weeks |
| 148. | Blender, IIT Bombay | IIT Bombay | Sahil Vilas Gaiki | 4 week |
| 149. | The Finite Element Method (FEM/FEA) | UDEMY | Sameer Sunil Gajbhiye | 4 weeks |
| 150. | Introduction to big data | Coursera | Rohit Ramesh Meshram | 1 month |
| 151. | Work system Design NPTEL | NPTEL | Aniket Dnyaneshwar Chaudhari | 12 |
| 152. | Robotic:mobility by coursera | Coursera | Rajnish Vijay Rangari | 6 weeks |
| 153. | What is data science | Infosys | Sanchit Subodhrao Kshirsagar | 4 week |
| 154. | Manufacturing process technology | NPTEL | Umang Dilip Somkuwar | 12 weeks |
| 155. | Electric power system | Coursera | Ashwadip Dhananand Sahare | 9 weeks |
| 156. | Electric power system | Coursera | Ashwadip Dhananand Sahare | 9 weeks |
| 157. | BlockChain Basic | Coursera | Reena Ravindra Bodele | 4 weeks |
| 158. | Python Programming for Beginners | UDEMY | Abhishek Anil Kanoje | 3.5 hours |
| 159. | What is mind what is artificial intelligence? | Coursera | Prajwal Bhimrao Wahane | 8 weeks |
| 160. | The Finite element method | UDEMY | Prajwal Bhimrao Wahane | 4 week |
| 161. | Dart and flutter the complete flutter development course | UDEMY | Umang Dilip Somkuwar | 4 week |
| 162. | Dart and flutter | UDEMY | Umang Dilip Somkuwar | 4 week |
| 163. | Introduction to Thermodynamics: Transferring Energy from Here to There | Coursera | Parth Ramesh Dhore | 8 weeks |
| 164. | Python | UDEMY | Vaibhav Suresh Umare | 2 weeks |
| 165. | Course on Aerial Robotics & Robotics Mobility under Robotics specialization Coursera | Coursera | Ibrahim Murtaza Badri | 8 weeks |
| 166. | Introduction to Mechanical Engineering Design and Manufacturing with Fusion 360 | Coursera | Himanshu Suresh Gundawar | 8weeks |
| 167. | Python:-Data Structures | Coursera | Ram Dinesh Sant | 5 |
| 168. | Introduction to Thermodynamics, Coursera | Coursera | Sahil Uttam Ghangare | 8 |
| 169. | Advanced Machining Process – IIT Guwahati | NPTEL | Prachitesh Prakash Wakde | 8 weeks |
| 170. | C for everyone: Programming fundamentals, Coursera | Coursera | Dnyaneshwar Narayan Giri | 6 weeks |
| 171. | Python Basics by University of Michigan | Coursera | Gagan Ganesh Kaware | 4 weeks |
| 172. | University of Pennsylvania | Coursera | Akshay Moreshwar Khode | 8 Weeks |
| 173. | ROBOTICS: AERIAL ROBOTICS & MOBILITY (Coursera) | Coursera | Akshay Ashok Patne | 4 + 4 = 8 Weeks |
| 174. | robotics mobility & robotics aerial robotics | Coursera | Aryan Sanjay Ramteke | 4 Weeks + 4 Weeks |
| 175. | Introduction to Statistics | Coursera | Ashish Pramod Jivtode | 8 Weeks |
| 176. | Semiconductor packaging manufacturing (Arizona state University) | Coursera | Saurabh Dilip Dupare | 12 weeks |
| 177. | UC SANTA CRUZ | Coursera | Harsh Rajiv Gathibandhe | 6 weeks |
| 178. | Introduction to thermodynamics, transferring energy from here to there | Coursera | Prathmesh Anil Sutrupkar | 8 week |
| 179. | Aerial robotics and mobility | Coursera;Spoken tutorial | Swayamdeep Arun Bhange | 8 |
| 180. | Product management marketing | UDEMY | Sanghanshu Devanand Gondane | 9 weeks |
| 181. | Arizona State University | Coursera | Kamesh Subhash Ghatole | 12 weeks |
| 182. | Robotics, University of Pennsylvania | Coursera | Aditya Raju Nimje | 8 week |
| 183. | Coursera course in semiconductor packaging manufacturing in online | Coursera | Aniket Ishwar Dhurve | 12 weeks |
| 184. | Complete Solidworks Beginners Course by udemy | UDEMY;Prepinsta | Siddhesh Sachin Pande | 8 |
| 185. | Blender – Spoken tutorial IIT bombay | Spoken Tutorial | Atharva Vijay Chimote | 4 weeks |
| 186. | Spoken Tutorial | Spoken Tutorial | Metta Dnyaneshwar Bhandare | 4 weeks |
| 187. | Blender Course (SpokenTutorial, IIT Bombay) | Spoken Tutorial | Pawan Raju Mandekar | 4 weeks |
| 188. | Spoken tutorial by IIT Bombay | Spoken tutorial | Sohan Gautam Tabhane | 1 month |
| 189. | Blender IIT bombay | spoken tutorial | Chaitanya Mahadeo Kohad | 1 month |
| 190. | Blender , IIT Bombay | Spoken Tutorial Project | Utkarsh Ananda Patil | 4 Weeks |
| 191. | Blender, Spoken Tutorial project at IIT Bombay | Spoken Tutorial Project at IIT Bombay | Abhishek Shyam Dharme | 4 weeks |
| 192. | Blender by Spoken Tutorial Project,IIT Bombay | Spoken Tutorial | Pranay Ashok Dhakate | 4 weeks |
| 193. | Blender and spoken tutorial | Spoken tutorial | Ankit Madhukar Kumar | 3 |
| 194. | IIT Bombay | Spoken tutorial Blender | Bhivesh Bhupendra Katre | 4 weeks |
| 195. | Spoken tutorial project at IIT Bombay organized at Yeshwantrao Chavan College of Engineering, Nagpur | Spoken tutorial project at IIT Bombay | Aditi Ganesh Morghade | 5 weeks |
| 196. | Aerial Robotics and Mobility Conducted by University of Pennsylvania | Coursera | Himanshu Rajesh Meshram | Total No. Of week – 08 |
| 197. | This training is offered by the Spoken Tutorial Project, IIT Bombay. | Spoken Tutorial Project | Tejas Kashinathji Wankhade | 8 Weeks |
| 198. | Name: introduction to thermodynamics transferring energy from here and there by:university of Michigan | Coursera | Om Diliprao Gorde | 8 week |
| 199. | Python program from UST | Coursera | Shardul Paresh Belan | 10 weeks |
| 200. | Python program from UST | Coursera | Anurag Parag Aparajit | 4 weeks |
| 201. | Java Programming for Complete Beginners. | UDEMY | Girish Sanjay Sorte | 8 weeks |
| 202. | Robotics: Aerial Robotics & Mobility by coursera | Coursera | Chetan Pradip Dhapodkar | 8 weeks |
| 203. | CPP training | Coursera;IIT Bombay | Shrirang Gajanan Chobe | 8 weeks |
| 204. | Product Management Marketing: Dekker’s Product Marketing MBA | UDEMY | Nayan Arun Wadhai | 33 hours |
| 205. | Aerial robotics and mobility (University of Pennsylvania) | Coursera | Ashay Sanjay Shrirao | 7 weeks |
| 206. | course 1 :- Foundations Of Cybersecurity course 2 :- Play It Safe: Manage Security Risk course 3 :- Connect And Protect: Networks And Network Security (GOOGLE) | Coursera | Vaibhav Pundlikrao Sathe | course 1 :- 4WEEKS course 2 :- 4WEEKS course 3 :- 4WEEKS |
| 207. | Foundations: data, Data, Everywhere By Google (Coursera) | Coursera | Kshitij Sudhakar Lonkar | 6 weeks |
| 208. | Supply Chain Excellence | Coursera | Kushal Pramod Gawande | 4 |
| 209. | Honor – Subtractive and Additive Manufacturing | Coursera;UG MINOR/Honour | Sahil Chandrashekhar Lakhote | Semester long |
| 210. | Automate cyber security tasks with python | Coursera | Saurabh Vijay Pande | 4 weeks |
| 211. | Proper dot institute , UDEMY | Coursera;UDEMY | Shamsundar Gangadhar Ware | 8 week |
| 212. | Crash Course On Python, Coursera | Coursera | Ganesh Laxman Dake | 6 |
| 213. | Robotics: Aerial Robotics | Coursera | Vaibhav Rajesh Amale | 4 |
| 214. | Production Management : Foundation and Initiation | Coursera | Divya Pravin Chamate | 4 weeks |
| 215. | Tim Buchalka’s learn Programming University | UDEMY | Tejas Ramkrushna Gaiki | 25.5 hours |
| 216. | Introduction to mechanical engineering design and manufacturing with fusion 360(coursera) | Coursera | Yash Anil Kuhikar | 4 weeks |
| 217. | course 1:Foundations: Data, Data, Everywhere, course 2 :Ask Questions to Make Data-Driven Decisions (COURSERA GOOGLE) | Coursera | Lalit Prabhakar Bhute | Course 1: 5 week , Course 2: 4 week |
| 218. | Introduction to Thermodynamics: Transferring Energy from Here to There | Coursera | Shubham Suresh Rangari | 45 hours |
| 219. | Introduction to Artificial Intelligence , Coursera | Coursera | Shreyash Ashok Wakde | 4 weeks |
| 220. | Introduction to cloud computing By IBM | Coursera | Yash Narendra Ukey | 12weeks |
| 221. | 1.Spoken Tutorials – Blender Training, 2. Spoken Tutorials – Cpp Training, 3. Coursera – Programming Foundations with JavaScript, HTML and CSS, 4. Coursera – Nanotechnology: A Maker’s Cours, 5. Udemy – The Complete Python Bootcamp From Zero to Hero in Python | Coursera;UDEMY;Spoken Tutorials | Owais Ashfaque Sheikh | 8 Weeks |
| 222. | Blender Training Course organized by IIT Bombay | Spoken Tutorial Project, IIT Bombay | Gaurav Pramod Kinholkar | 5 weeks |
| 223. | Spoken Tutorial Project, IIT Bombay. | Spoken tutorial Blender | Ankit Ashok Uikey | 4 weeks |
| 224. | BLENDER- IIT BOMBAY | Spoken Tutorial | Spandan Devidas Patre | 4 |
| 225. | Spoken Tutorials by IIT BOMBAY | Spoken Tutorials IIT BOMBAY | Satish Raju Bidkar | 4 Weeks |
| 226. | IIT BOMBAY | Spoken Tutorial (Blender) | Vitthal Kashiram Kumre | 4 weeks |
| 227. | Blender Course organised by Spoken tutorial IIT Bombay | Spoken Tutorial | Tushar Sureshrao Pande | 4 WEEK |
| 228. | Certificate for the Completion of Blender Training | spoken tutorial IIT BOMBAY | Mohd Shaquib Mohd Wahid . | 4 weeks |
| 229. | Blender Training by IIT Bombay | Spoken tutorial project by IIT Bombay | Utkarsh Nitin Waghmare | 6 weeks |
| 230. | Blender organised by ycce | IIT Bombay | Avadhut Pandurang Shrimalwar | 12 |
| 231. | Introduction to Mechanical Engineering Design & Manufacturing with Fusion 360 | Coursera | Ritwik Arvind Kadu | 4 weeks |
| 232. | (Blender software )Spoken Tutorial Project, IIT Bombay. | spoken tutorial | Nehal Pramod Thape | 4 weeks |
| 233. | Spoken tutorial IIT Bombay | spoken tutorial | Aryan Deepak Lade | 2/10/23 to 3/11/23 |
| 234. | Blender Course | SPOKEN TUTORIAL (BLENDER) | Hritik Vidyasagar Jibhe | 4 weeks |
| 235. | Data science for health research specialization by university of Michigan | Coursera | 9010495 Simran Ashish Marotkar | 12 week course |
| 236. | Matlab | Coursera | Piyush Anil Bankar | 8 weeks |
| 237. | Blender(IIT Bombay) | Spoken tutorial | Prajwal Baba Dhok | 4 week |
| 238. | Blender by YCCE | Spoken tutorial project at IIT Bombay | SAWARKAR ROMA CHHATRAPAL | 5 weeks |
| 239. | Python:Master Programming and Development with 15 Projects / Udemy | UDEMY | Niraj Vinayak Tathod | 32 hours |
| 240. | Spoken Tutorial Project, IIT Bombay Blender | Spoken Tutorial Project, IIT Bombay Blender | Mohit Anil Gaikwad | 4 months |
| 241. | Blender | Spoken tutorial | Vikshapti Gulab Warkar | 4 weeks |
| 242. | Foundations of Cybersecurity | Coursera | Swarnim Pornima Patil | 4 weeks |
| 243. | Introduction ot Mechanical Engineering Design and Manufacturing with Fusion 360 | Coursera | Prathamesh Nitin Deshpande | 4 weeks |
| 244. | Programming with javascript | Coursera | Mandar Arvind Purohit | 30 days |
| 245. | Blender Training, Spoken Tutorial Project, IIT Bombay. | Spoken Tutorial, IIT Bombay, Blender Training | Vaidehi Manoj Ingle | 13 weeks |
| 246. | The Complete Python Bootcamp From Zero to Hero in Python Instructors Jose Portilla | UDEMY | Ujwal Kishor Ghate | 22 Total Hour |
| 247. | NVIDIA – building video Ai application at the end of jetson nano | NVIDIA | Prajwal Manik Ingle | 5week |
| 248. | Python and django framework | UDEMY | Akash Bhojraj Dhoke | 4week |
| 249. | Sports and Building Aerodynamics | Coursera | Shahid Shamim Hussain | 8 Weeks |
| 250. | Introduction to probability and data by coursera | Coursera | Vaibhav Sudam Hatwar | 4 weeks |
| 251. | Coursera | Coursera | Yash Anil Wange | 4 weeks |
| 252. | AWS Fundamentals :Migrating to the Cloud | Coursera | Swapnil Hemant Deshmukh | 10 weeks |
| 253. | Introduction to Additive Manufacturing Process , AutoCAD for Design and Drafting | Coursera | Saili Raju Satfale | Autodesk Autocad- 2 weeks , Introduction to Additive Manufacturing Process -5 weeks |
| 254. | 1) Renewable Energy Projects by University of Colorado Boulder and 2) Introduction to Additive Manufacturing Processes by Arizona State University | Coursera | Parth Prashant Maske | 5 weeks per course |
| 255. | Pythone and django Framework | UDEMY | Apeksha Kishor Bhaisare | 4 weak |
| 256. | Introduction to Mechanical Engineering Design and Manufacturing with Fusion 360 organised by coursera | Coursera | Ayushi Sunilsingh Bais | 4 weeks |
| 257. | Successful Negotiation: Essential Strategies and Skills, University of Michigan | Coursera | Satyam Santosh Singh | 7 Weeks |
| 258. | supply chain operations | Coursera | Aniruddha Vishal Dalal | 8 weeks |
| 259. | Introduction to solar cell | Coursera | Siddheshwar Ganesh Yerne | 8 weeks |
| 260. | Digital Transformation:- Theory and applications ( IIMB ) | Coursera;Swayam | Vaibhav Gurudeo Tajne | 5 weeks |
| 261. | Machine learning by standford University | Coursera | Sumit Subhash Kolhe | 4 weeks |
| 262. | The complete leadership mastery | UDEMY | Shreyash Chandradas Meshram | 6 |
| 263. | Name : Automate cybersecurity Task with Python Organization: Coursera | Coursera;UDEMY | Gaurav Shrikant Karajgikar | 4 weeks (for VAC-1) 3 weeks (for VAC-2) |
| 264. | Programming for Everybody (Getting Started with Python) COURSERA | Coursera | Isha Mukesh Mahalle | 7 |
| 265. | Programming for Everybody (Getting Started with Python) | Coursera | Aryant Sudhir Yeole | 7weeks |
| 266. | Machine Learning | Coursera | Aniket Harish Bilgaiya | 4 week |
| 267. | FEM – Linear, Nonlinear Analysis & Post- Processing | Coursera | Rushikesh Purushottam Nikam | 4 |
| 268. | Autodesk From Coursera | Coursera | Nemashri Kawduji Kulsange | 4 weeks |
| 269. | University of miniseotta | Coursera | Aditya Uddhaorao Selokar | 12 weeks |
| 270. | Big data and machine learning | Coursera | Nikhil Prabhakar Wankhede | 8 week |
| 271. | Supply chain management and strategy | Coursera | Sakshi Vilasrao Chavhan | 6 week |
| 272. | Python for data science ,AI and development through coursera | Coursera | Jayesh Naresh Vairagade | 5 weeks |
| 273. | Python for Data Science, AI & Developmet | Coursera;Mathworks | Rohit Narayan Bhanuse | 5 weeks |
| 274. | IIT (BLENDER) | Spoken Tutorial | Aayush Akhilesh Dixit | 2 Month |
| 275. | 1)Blender 2) Supply chain Management | Spoken tutorial at IIT Bombay | Viraj Arvind Kothe | 4 weeks |
| 276. | Blender training | IIT Bombay | Anmol Khojram Wanjari | 2 month |
| 277. | Blenders and IIT BOMBAY | Spoken tutorial | Prasad Prakash Khobaragade | 5 weeks (02/10/2023 to 03/11/2023) |
| 278. | Blender ,IIT Bombay | Spoken Tutorial IIT Bombay | Shantanu Shriram Kalode | 5 weeks (2/10/23 to 3/11/23) |
| 279. | Introduction to probability and data and blender | Coursera | Abhishek Prafullrao Ralekar | 4 week |
| 280. | Spoken tutorial blender software (IIT Bombay) | IIT Bombay | Shreyas Sanjay Gajbhiye | 9/10/2023 to 10/11/2023 |
| 281. | Programming for Everybody (Getting Started with Python) | Coursera;masai | Himanshu Rameshwar Dhabarde | 6 weeks |
| 282. | Blender Spoken Tutorial Project, IIT Bombay | IIT BOMBAY | Khushal Sanjay Walde | 4 |
| 283. | Supply Chain Sourcing | Coursera | Aditya Dilip Dhapodkar | 8-weeks |
| 284. | Supply Chain : Planning (By Rutgers University) | Coursera | Manthan Umesh Bansod | 8 weeks |
| 285. | Machine Learning and stanford University | Coursera | Anshul Laxman Ghutke | 4 week |
| 286. | IIT Bombay | Spoken tutorial | Gunit Gulab Mandade | 4 weeks |
| 287. | English for Business and Entrepreneurship | Coursera;Spoken tutorial | Nilesh Chandrabhan Khonde | 6 week |
| 288. | Coursera 1 month | Coursera | Piyush Mahesh Borkar | 4 weeks |
| 289. | MATLAB , Vanderbilt University | Coursera | Harendra Sanjay Thakur | 8 weeks |
| 290. | Blender Training and Spoken Tutorial Project (IIT Bombay) | UDEMY;Spoken Tutorial Project (IIT Bombay) – Blender | Durvesh Rajesh Mokadam | 02-10-2023 to 03-11-2023 |
| 291. | 1.Python for data science AI & Development 2. Blender Training certificate | Coursera;Blender Certificate | Raunak Satish Somkuwar | 40 hours |
| 292. | Additive Manufacturing Processes | Coursera | Pavitra Suresh Athawale | 5 week |
| 293. | Python Program UST | Coursera | Ameya Nitin Labdi | 3months |
| 294. | Work System Design (NPTEL) | NPTEL | Aviral Sanjay Bhivgade | 12 weeks |
| S.N | Title of Programme | Organised by | Name of Participant | Organised by | Date |
| 1 | Work System Design by IIT Roorkee | NPTEL | WAKDE PRACHITESH PRAKASH | NPTEL | 04-08-2022 |
| 2 | 1) Work system design (NPTEL : IIT Roorkee) 2) Python 3.4.3 (spoken tutorial : IIT Bombay) | NPTEL | SUTRUPKAR PRATHMESH ANIL | NPTEL | 25-07-2022 |
| 3 | Work System Design/NPTEL | NPTEL | GHANGARE SAHIL UTTAM | NPTEL | 02-08-2022 |
| 4 | Work System Design NPTEL IIT ROORKEE & Python 3.4 spoken tutorial IIT BOMBAY | NPTEL | DHORE PARTH RAMESH | NPTEL | 25-07-2022 |
| 5 | Work system design by IIT roorkee | NPTEL | GORDE OM DILIPRAO | NPTEL | 08-08-2022 |
| 6 | Advanced machining processes -NPTEL , Python -Spoken Tutorial | NPTEL | SATFALE SAILI RAJU | NPTEL | 22-08-2022 |
| 7 | Advanced machining processes -NPTEL , Python -Spoken Tutorial | NPTEL | BAIS AYUSHI SUNILSINGH | NPTEL | 23-08-2022 |
| 8 | NPTEL, VAC, Spoken Tutorial Project, IIT Bombay. (VAC ANSYS undergoing valuation) | NPTEL | BHONSLE KALPESH SUNIL | NPTEL | 16-08-2022 |
| 9 | IIT Guwahati Advanced machining processes | NPTEL | BILGAIYA ANIKET HARISH | NPTEL | 14-08-2022 |
| 10 | Advance Machining Processess- IIT GUWAHATI | NPTEL | WELANKIWAR TEJAS VIVEK | NPTEL | 20-08-2022 |
| 11 | Robotics Specialization (6 courses) | University of Pennsylvania | ARPITA SINGH | Coursera | Jan. 2023 |
| 12 | Robotics Specialization (6 courses) | University of Pennsylvania | MALWAR RUTUJA DEVMAN | Coursera | Jan. 2023 |
| 13 | Robotics Specialization (6 courses) | University of Pennsylvania | SAKSHEE ASHIK TEMBHURKAR | Coursera | Jan. 2023 |
| 14 | Robotics Specialization (6 courses) | University of Pennsylvania | BAWANKAR MOHANISH CHANDRAKANT | Coursera | Jan. 2023 |
| 15 | Robotics Specialization (6 courses) | University of Pennsylvania | CHAKOLE RITIK JITENDRA | Coursera | Jan. 2023 |
| 16 | Robotics Specialization (6 courses) | University of Pennsylvania | BOKDE RUSHABH VINOD | Coursera | Jan. 2023 |
| 17 | Robotics Specialization (6 courses) | University of Pennsylvania | GABHANE SAHADEO RAMESHWAR | Coursera | Jan. 2023 |
| 18 | Robotics Specialization (6 courses) | University of Pennsylvania | NIMSARKAR SHUBHAM PRAVIN | Coursera | Jan. 2023 |
| 19 | Robotics Specialization (6 courses) | University of Pennsylvania | KUMBHARE YASH RAMESH | Coursera | Jan. 2023 |
| 20 | Robotics Specialization (6 courses) | University of Pennsylvania | RAMTEKE ADITYA KUNDAN | Coursera | Jan. 2023 |
| 21 | Robotics Specialization (6 courses) | University of Pennsylvania | BHAWALKAR AKASH RAMESH | Coursera | Jan. 2023 |
| 22 | Robotics Specialization (6 courses) | University of Pennsylvania | NIKOSE ANITYA RAJENDRA | Coursera | Jan. 2023 |
| 23 | Robotics Specialization (6 courses) | University of Pennsylvania | JAWAJWAR NINAD RAMESH | Coursera | Jan. 2023 |
| 24 | Robotics Specialization (6 courses) | University of Pennsylvania | PAWAR PARIMAL KAILAS | Coursera | Jan. 2023 |
| 25 | Robotics Specialization (6 courses) | University of Pennsylvania | DEWANGAN PRATIK DHARMESH | Coursera | Jan. 2023 |
| 26 | Robotics Specialization (6 courses) | University of Pennsylvania | BHOYAR SATYAM NAMDEO | Coursera | Jan. 2023 |
| 27 | Robotics Specialization (6 courses) | University of Pennsylvania | UMRE SHASHVAT SURESH | Coursera | Jan. 2023 |
| 28 | Robotics Specialization (6 courses) | University of Pennsylvania | AYUSH SHAILENDRASINGH CHOUHAN | Coursera | Jan. 2023 |
| 29 | Robotics Specialization (6 courses) | University of Pennsylvania | MESHRAM SHREYASH RAJESH | Coursera | Jan. 2023 |
| 30 | Robotics Specialization (6 courses) | University of Pennsylvania | SOMKUWAR SNEHANSHU SUNIL | Coursera | Jan. 2023 |
| 31 | JAVA 11 ESSENTIALS | Infosys | GAJBHIYE SHRIKANT MARTAND | Infosys | January 8th 2023 |
| 32 | Modeling and Design for Mechanical Engineers with Autodesk Fusion 360 | Autocad | Pratham PRASANNA Thorat | Coursera | Jan 23, 2023 |
| 33 | Supply Chain Management Specialization | Rutgers the State University of New Jersey | Kawale Sakshi Naresh | Coursera | April-2023 |
| 34 | Supply Chain Management Specialization | Rutgers the State University of New Jersey | Nimje Aditya Raju | Coursera | April-2023 |
| 35 | Supply Chain Management Specialization | Rutgers the State University of New Jersey | Khode Akshay Moreshwar | Coursera | April-2023 |
| 36 | Supply Chain Management Specialization | Rutgers the State University of New Jersey | Patne Akshay Ashok | Coursera | April-2023 |
| 37 | Supply Chain Management Specialization | Rutgers the State University of New Jersey | Dhapodkar Chetan Pradip | Coursera | April-2023 |
| 38 | Supply Chain Management Specialization | Rutgers the State University of New Jersey | Gundawar Himanshu Suresh | Coursera | April-2023 |
| 39 | Supply Chain Management Specialization | Rutgers the State University of New Jersey | Meshram Himanshu Rajesh | Coursera | April-2023 |
| 40 | Supply Chain Management Specialization | Rutgers the State University of New Jersey | Badri Ibrahim Murtaza | Coursera | April-2023 |
| 41 | Supply Chain Management Specialization | Rutgers the State University of New Jersey | BhangeSwayamdeep Arun | Coursera | April-2023 |
| 42 | Supply Chain Management Specialization | Rutgers the State University of New Jersey | Lokhande Udyan Vilas | Coursera | April-2023 |
| 43 | Supply Chain Management Specialization | Rutgers the State University of New Jersey | Pohane Aditya Dilip | Coursera | April-2023 |
| 44 | Supply Chain Management Specialization | Rutgers the State University of New Jersey | Anshuman PrafullMangrulkar | Coursera | April-2023 |
| 45 | Supply Chain Management Specialization | Rutgers the State University of New Jersey | PatreSpandanDevidas | Coursera | April-2023 |
| 46 | Supply Chain Management Specialization | Rutgers the State University of New Jersey | Amale Vaibhav Rajesh | Coursera | April-2023 |
| 47 | Supply Chain Management Specialization | Rutgers the State University of New Jersey | Lakhote Sahil Chandrashekhar | Coursera | April-2023 |
| 48 | Supply Chain Management Specialization | Rutgers the State University of New Jersey | Wanjari Anmol Khojram | Coursera | April-2023 |
| 49 | Supply Chain Management Specialization | Rutgers the State University of New Jersey | Wankhede Nikhil Prabhakar | Coursera | April-2023 |
| 50 | Supply Chain Management Specialization | Rutgers the State University of New Jersey | Borkar Piyush Mahesh | Coursera | April-2023 |
| 51 | Supply Chain Management Specialization | Rutgers the State University of New Jersey | Gadekar Pranit Sanjay | Coursera | April-2023 |
| 52 | Supply Chain Management Specialization | Rutgers the State University of New Jersey | Dehankar Aman Ramdas (B. E.) | Coursera | April-2023 |
| 53 | Supply Chain Management Specialization | Rutgers the State University of New Jersey | Kawale Sakshi Naresh | Coursera | April-2023 |
| 54 | Supply Chain Management Specialization | Rutgers the State University of New Jersey | Nimje Aditya Raju | Coursera | April-2023 |
| 55 | Supply Chain Management Specialization | Rutgers the State University of New Jersey | Khode Akshay Moreshwar | Coursera | April-2023 |
| 56 | Supply Chain Management Specialization | Rutgers the State University of New Jersey | Patne Akshay Ashok | Coursera | April-2023 |
| 57 | Supply Chain Management Specialization | Rutgers the State University of New Jersey | Dhapodkar Chetan Pradip | Coursera | April-2023 |
| 58 | Supply Chain Management Specialization | Rutgers the State University of New Jersey | Gundawar Himanshu Suresh | Coursera | April-2023 |
| 59 | Supply Chain Management Specialization | Rutgers the State University of New Jersey | Meshram Himanshu Rajesh | Coursera | April-2023 |
| 60 | Supply Chain Management Specialization | Rutgers the State University of New Jersey | Badri Ibrahim Murtaza | Coursera | April-2023 |
| 61 | Supply Chain Management Specialization | Rutgers the State University of New Jersey | BhangeSwayamdeep Arun | Coursera | April-2023 |
| 62 | Supply Chain Management Specialization | Rutgers the State University of New Jersey | Lokhande Udyan Vilas | Coursera | April-2023 |
| 63 | Supply Chain Management Specialization | Rutgers the State University of New Jersey | Pohane Aditya Dilip | Coursera | April-2023 |
| 64 | Supply Chain Management Specialization | Rutgers the State University of New Jersey | Anshuman PrafullMangrulkar | Coursera | April-2023 |
| 65 | Supply Chain Management Specialization | Rutgers the State University of New Jersey | PatreSpandanDevidas | Coursera | April-2023 |
| 66 | Supply Chain Management Specialization | Rutgers the State University of New Jersey | Amale Vaibhav Rajesh | Coursera | April-2023 |
| 67 | Supply Chain Management Specialization | Rutgers the State University of New Jersey | Lakhote Sahil Chandrashekhar | Coursera | April-2023 |
| 68 | Supply Chain Management Specialization | Rutgers the State University of New Jersey | Wanjari Anmol Khojram | Coursera | April-2023 |
| 69 | Supply Chain Management Specialization | Rutgers the State University of New Jersey | Wankhede Nikhil Prabhakar | Coursera | April-2023 |
| 70 | Supply Chain Management Specialization | Rutgers the State University of New Jersey | Borkar Piyush Mahesh | Coursera | April-2023 |
| 71 | Supply Chain Management Specialization | Rutgers the State University of New Jersey | Gadekar Pranit Sanjay | Coursera | April-2023 |
| 72 | Supply Chain Management Specialization | Rutgers the State University of New Jersey | Dehankar Aman Ramdas | Coursera | April-2023 |
| 73 | Six Sigma Tools for Define and Measure | Kennesaw State University | PRATHAMESH SHAH | Coursera | May 4, 2023 |
| 74 | Six Sigma Tools for Analyze | Kennesaw State University | PRATHAMESH SHAH | Coursera | May 5, 2023 |
| 75 | Six Sigma Tools for Analyze | Kennesaw State University | Faraz Khan | Coursera | May 7, 2023 |
| S.N | Name Of Participant | Title Of Paper | Type of Publication | Conference Name | Organizing Institute | Date of Conference |
| 1 | Tushar Lungare | Benefit-Cost Model For Sustainable Fashion Using Multi-Objective Optimization On The Basis Of Ratio Analysis | Conference | International Conference on Smart Mechanical Systems for Sustainability | DWARKADAS J. SANGHVI COLLEGE OF ENGINEERING, MUMBAI | 22-12-2025 |
| 2 | Atharva khonde | An extensive review on past, present and future trends of soft cervical collar | Conference | 3rd IEEE DMIHER (DU) International Conference on“Artificial Intelligence in Healthcare, Education & Industry” (IDICAIHEI 2025) | DMIHER | 28-11-2025 |
| 3 | Prof. P.S. Barve, HIMANSHU K. KUKDE, SIDDHESH S. BODHARE, VAIBHAV R. SURYAWANSHI | Development of Ventilated Helmet with UV Disinfection System | Conference | “Third International Conference on Recent Advances in Engineering, Technology & Management” | CK College of Engineering and Technology | 23-05-2025 |
| 4 | Amarendra Akre | INTEGRATION OF IOT, AI AND SCADA FOR SMART DRINKING WATER TREATMENT PLANTS | Conference | ICSIETS 2026 International Conference on Sustainability & Innovation in Engineering, Technology & Applied Sciences | Yeshwantrao Chavan college of Engineering, Nagpur | 26-02-2026 |
| 5 | Nandkishor Chavan | DESIGN AND IMPLEMENTATION OF A LOW-COST QUALITY CONTROL SYSTEM FOR CARD CLOTHING (CARDING ROPE/WIRE) | Conference | ICSIETS 2026 International Conference on Sustainability & Innovation in Engineering, Technology & Applied Sciences | Yeshwantrao Chavan college of Engineering, Nagpur | 27-02-2026 |
| 6 | Aniruddha Tikaramji Khandekar | An IOT based Multi sensor digital twin for predictive maintenance of industrial motors | Conference | ICSIETS 2026 International Conference on Sustainability & Innovation in Engineering, Technology & Applied Sciences | Yeshwantrao Chavan College of engineering, Nagpur | 27-02-2026 |
| 7 | Ashish Premshankar Umarkar | Experimental Investigation of a Passive Direct Polymer Electrolyte Fuel Cell Using L-Ascorbic Acid as a Fuel | Journal | Reports in Mechanical Engineering | Reports in Mechanical Engineering | 20-02-2026 |
| 8 | Ku Albela Himmatrao Pundkar | Advancing frontiers: A comprehensive review on 21st century smart advanced materials and their emerging applications to mechanical engineering | Conference | API Conference Proceeding | OPJU University | 12-12-2024 |
| 9 | Om Kiran Urkande | AI-Based Knee Implant Recommendation from Radiographic Images using Deep Learning | Conference | 2025 3rd DMIHER International Conference on Artificial Intelligence in Healthcare, Education and Industry (IDICAIHEI) | DMIHER, Wardha. | 28-11-2025 |
| 10 | Ku.Albela Himmatrao Pundkar | Overall impact on thermal and tribological performance of air conditioning system with nanoparticle application: a critical review | Journal | INTERNATIONAL JOURNAL OF AIRCONDITIONING AND REFRIGERATION | NA | 17 September 2025 |
| 11 | LOKESH GANPAT KAMDE | A Comprehensive Review of Human Wildlife Conflict and Effective Technological Mitigation Strategies | Journal | Society and Natural Resource | T & F | 18-11-2025 |
| 12 | Madhao B.Bhambere | 2.Experimental and numerical investigation of heat transfer enhancement using perforated fins in electric motor. | Journal | International Communications in Heat and Mass Transfer | Not Applicable | 01-08-2025 |
| 13 | Madhao B. Bhambere | 1.Investigation of convective heat transfer from non perforated and perforated rectangular and pin fins for effective cooling of electric motors: A numerical approach. | Journal | International Journal of Thermofluids | Not Applicable | 15-08-2025 |
| 14 | Madhao B. Bhambere | Artificial Neural Network approach for heat transfer analysis of solid and perforated finned housing of electric motor | Conference | International Conference on AI Driven Engineering & Technology (AIDCon-2025) | St. Vincent Palloti College of Engineering & Technology, Nagpur | 12-12-2025 |
| S.N | Name of the Students | Faculty Guides | Event Title | Organized By | Prize | Dates | Title of Paper/Project |
| 1 | Madhur Natekar, Sunil Prayagi | – | ESCI PAPER | Heat Transfer Journal | – | – | Thermal Stress Analysis and Heat Transfer Optimization in Functionally Graded Annular Fin With Memory-Dependent Effects |
| 2 | Geetesh Shinde, Rohit Gawhare, Nilesh Gedam, Vivek Korde | – | ICRAETM2025 | Ck College of Engineering and Technology | – | 23 May 2025 | Experimental investigation, performance characteristics and efficiency assessment of water harvesting system |
| 3 | Rahul Katre | G H Waghmare | SCOPUS JOURNAL PAPER | International Journal of Environmental Sciences | – | June 2025 | Robotics in Underground Mining for Improved Worker Safety and Efficiency |
| 4 | Ajay Mahakalkar | S S KHEDKAR | ICRAMEN 2025 | St John College of Engineering and Management, Palghar | Best paper award | 16–17 May 2025 | Development and optimisation of flexible ultrasonic phased-array probes for enhanced inspection of complex shaped components |
| 5 | Sagar Kumbhare | S T Bagde | MIGS2025 | G H Raisony University, Amravati | – | 17–18 April 2025 | Development and optimisation of automatic cotton ginning and Bell press plant |
| 6 | KRUNAL BHIMRAO BORKAR | M S TUFAIL | MIGS2025 | G H Raisony University, Amravati | – | 17–18 April 2025 | A mini review of spark erosion machining process for tool materials by using different electrodes |
| 7 | Mahesh Bele | A P EDLABADKAR | MIGS2025 | G H Raisony University, Amravati | – | 17–18 April 2025 | A literature review on comparative analysis of non contact AI vision controlled diameter measurement versus conventional methods in flux core wire drawing measurement |
| 8 | Kunal kumar singh | G M Dhote | MIGS2025 | G H Raisony University, Amravati | – | 17–18 April 2025 | A review of simulation and experimental analysis of heat treatment for steel tie rod |
| 9 | Suhas R Padawe | G M Dhote | MIGS2025 | G H Raisony University, Amravati | – | 17–18 April 2025 | Recent trends in Rotary kin and refractory material patterns in cement production: a review approach |
| 10 | Yash Dhabarde | P D Kamble | MIGS2025 | G H Raisony University, Amravati | – | 17–18 April 2025 | Application of genetic algorithm to optimise turning process parameters for aluminium alloy 64430 |
| 11 | Rahul Katre | G H Waghmare | MIGS2025 | G H Raisony University, Amravati | – | 17–18 April 2025 | A sensor integrated tool for cutting force monitoring in gantry milling to improve flatness and surface finish: Review study |
| 12 | Ajay kutarekar | R V Adakane | MIGS2025 | G H Raisony University, Amravati | – | 17–18 April 2025 | Development of solar powered automatic cotton picking machine using movable robotic arm a review |
| 13 | Rahul Katre, G H Waghmare, P D Kamble | – | Journal Paper | International Journal of Manufacturing and Materials Processing | – | 23 June 2025 | A Sensor Integrated Tool for Cutting Force Monitoring in Gantry Milling to Improve Flatness and Surface Finish: Review Study |
| S.N | Name Of Participant | Title Of Paper | Type of Publication | Conference Name | Organizing Institute | Date of Conference |
| 1 | Prajwal Chamata, Tushar Motghareb, Shreyash Borgharec, Aaradhya Wanged and Md. Sharique Tufaile | A mini-review on electro discharge machining of aluminium metal matrix composite materials | Conference | Recent Advanced in Material, Manufacturing and Machine Learning RAMMML-2023 | Dept Of Mechanical Engineering YCCE Nagpur | Feb-23 |
| 2 | Ashish P. Umarkar1, Dr. Rajkumar Chadge1, Dr. Jayant Giri1 and Dr. Naveen Shriwastava2 | Direct liquid fuel cell: challenges and advances | Conference | Recent Advanced in Material, Manufacturing and Machine Learning RAMMML-2023 | Dept Of Mechanical Engineering YCCE Nagpur | Feb-23
|
| 3 | Aditya Solankia, Shashank Jibhakateb, Vivek Mahadulec, Yash Belekard and Prasad Hatwalnee | Comparative analysis of NACA 0015 airfoil with bump using CFD | Conference | Recent Advanced in Material, Manufacturing and Machine Learning RAMMML-2023 | Dept Of Mechanical Engineering YCCE Nagpur | Feb-23
|
| 4 | Ninad Jawajwara, Sakshee Tembhurkarbb, Parimal Pawarc, Devendra Shahared | Implementation of origami application in a solar PV system: a review | Conference | Recent Advanced in Material, Manufacturing and Machine Learning RAMMML-2023 | Dept Of Mechanical Engineering YCCE Nagpur | Feb-23
|
| 5 | Kshitij S Lonkar Avadhut Shrimalwar Saurabh dupare Rushikesh Jambewar
| Design improvement of automobile radiator using evaporative cooling system | Conference | International conference on technological innovations & applications in industry 4.0: challenges and way ahead” (ICTIA-2024). | St Vincent PallottiCollege of Engineering & Technology, Nagpur. | April 24th-25th, 2024 |
| 6 | Prasad Khobragade Saili Satfale Nilesh Gedam Ayushi Bais Raunak Somkuwar | Overview of a vertical Axis wind turbine using multiple generators with single rotor | Conference | International conference on Robotics, automation and intelligent computing ICRAIC 2K24 | Research Association of Masters of Engineering | MAY 18th-19th, 2024 |
| 7 | Aditya Raju Nimje | Javelin throw training machine:- a comprehensive review | Conference | International conference on technological innovations & applications in industry 4.0: challenges and way ahead” (ICTIA-2024). | St Vincent PallottiCollege of Engineering & Technology, Nagpur. | April 24th-25th, 2024 |
| 8 | Gitesh sakure Yash wange | Technical review of a variable height speed breaker system with speed detection of two wheelers on a one way road | Conference | International conference on Robotics, automation and intelligent computing ICRAIC 2K24 | Research Association of Masters of Engineering | MAY 18th-19th, 2024 |
| 9 | Abhishek dharme Suvarsh S Rajankar Utkarsh Patil Ankit Kumar Rakesh adakane
| Design and Fabrication of automated commode cleaning machine | Conference | International conference on technological innovations & applications in industry 4.0: challenges and way ahead” (ICTIA-2024). | St Vincent PallottiCollege of Engineering & Technology, Nagpur. | April 24th-25th, 2024 |
| 10 | Tanmay panao Alok Narkhede Devendra shahare | Design and development of automatic rice transplanter machine | Conference | Nabard sponsored 9th international conference Shaastrarth-2024 emerging Technologies and multidisciplinary research for sustainable development | Rungta College of Engineering Technology Bhilai | 5th and 6th January 2024 |
| 11 | Dr. P.D. Kamble, Vaibhav Hatwar, Durvesh Mokadam, Satish Bidkar, Shubham Rangari | Literature Review on Automated Inspection System for Quality of Tyre Before Entry of Vehicle at Toll Gate | Conference | International conference on advances in mechanical engineering ICAME 23 | G H Raisoni College of Engineering. Nagpur | 22th and 23th December 2023 |
| 12 | Prajwal Chamata, Tushar Motghareb, Shreyash Borgharec, Aaradhya Wanged and Md. Sharique Tufaile | A mini-review on electro discharge machining of aluminium metal matrix composite materials | Conference | Recent Advanced in Material, Manufacturing and Machine Learning RAMMML-2023 | Dept Of Mechanical Engineering YCCE Nagpur | Feb-23
|
| 13 | Akash Dhoke Nemashri Kulsange Parth maske Manish Dakhore | Design and development of solar operated fodder cutting and collecting machine | Journal | International Journal of research in Applied Science and Engineering Technology | JOURNAL
IJRASET | VOL 12, ISSUE V, MAY 2024 |
| 14 | Jayesh Vairagade Khushal Walde Sakshi Chavan Swanim Patil Arun Kedar | Design and Fabrication of friction floor cleaner for cattle shade | Journal | International Journal of research in Applied Science and Engineering Technology | JOURNAL
IJRASET | VOL 12, ISSUE V, MAY 2024 |
| 15 | Navneet Shelke samyak Meshram Yash Kuhikar Manish dakhore | Design and development of automated lower Limb continuous passion motion CPM machine | Journal | International Journal of research in Applied Science and Engineering Technology | JOURNAL
IJRASET | VOL 12, ISSUE V, MAY 2024 |
| 16 | Dr. Sandip s. khedkar, Anshuman mangrulkar, owais Sheikh , kushal gawande, yash ukey5 | Design and Fabrication of Walking Aid for Knee Arthritis Patients | Journal |
International Journal of Science and Healthcare Research |
Vol.9; Issue: 2; April-June 2024 |
| S.N | Name Of Participant | Title Of Paper | Type of Publication | Conference Name | Organizing Institute | Date of Conference |
| 1 | Yusuf Baig | Investigation and comparative analysis of laminated composite leaf spring for lightweight vehicles using FEA | International Conference | Recent Advances in Materials, Manufacturing and Machine Learning (RAMMML)-2023 | Department of mechanical engineering, YCCE, Nagpur | 2nd to 4th Feb 2023 |
| 2 | Prajwal Chamat | A Mini-Review On Electro Discharge Machining of Aluminium Metal Matrix Composite Materials | International Conference | Recent Advances in Materials, Manufacturing and Machine Learning (RAMMML)-2023 | Department of mechanical engineering, YCCE, Nagpur | 2nd to 4th Feb 2023 |
| 3 | Pratham Atram | Design and Fabrication of Automatic Quantifiable Cereals Dispenser | International Conference | Recent Advances in Materials, Manufacturing and Machine Learning (RAMMML)-2023 | Department of mechanical engineering, YCCE, Nagpur | 2nd to 4th Feb 2023 |
| 4 | Aditya Solanki | Comparative analysis of NACA 0015 airfoil with bump using CFD | International Conference | Recent Advances in Materials, Manufacturing and Machine Learning (RAMMML)-2023 | Department of mechanical engineering, YCCE, Nagpur | 2nd to 4th Feb 2023 |
| 5 | Yogesh Pole | Experimental Analysis of active and passive cooling of Multijunction Tandem (MJT) cell using various cooling methods | International Conference | Recent Advances in Materials, Manufacturing and Machine Learning (RAMMML)-2023 | Department of mechanical engineering, YCCE, Nagpur | 2nd to 4th Feb 2023 |
| 6 | RiteshSureshrao Raut | Design and Fabrication of Fodder Cutter & Collecting Machine. | International Conference | Recent Advances in Materials, Manufacturing and Machine Learning (RAMMML)-2023 | Department of mechanical engineering, YCCE, Nagpur | 2nd to 4th Feb 2023 |
| 7 | Syed AvaisAshher | Design and development of semi-automated sand refining machine | International Conference | Recent Advances in Materials, Manufacturing and Machine Learning (RAMMML)-2023 | Department of mechanical engineering, YCCE, Nagpur | 2nd to 4th Feb 2023 |
| 8 | Ajith Krishnan Nambudiripad | Fabrication of smartphone operated robotic arm based trasportation vehicle in industries | International Conference | Recent Advances in Materials, Manufacturing and Machine Learning (RAMMML)-2023 | Department of mechanical engineering, YCCE, Nagpur | 2nd to 4th Feb 2023 |
| 9 | SahadeoGabhane | Design of Portable Hand Moving Briquetting Machine. | International Conference | Recent Advances in Materials, Manufacturing and Machine Learning (RAMMML)-2023 | Department of mechanical engineering, YCCE, Nagpur | 2nd to 4th Feb 2023 |
| 10 | Shubham Bhave | DESIGN & EVALUATION OF VALUE STREAM MAPPING IN SMALL SCALE INDUSTRY | International Conference | Recent Advances in Materials, Manufacturing and Machine Learning (RAMMML)-2023 | Department of mechanical engineering, YCCE, Nagpur | 2nd to 4th Feb 2023 |
| 11 | YASH SURYAKANT DALAL | Design and development of Pressure cuff baby massager garment | International Conference | Recent Advances in Materials, Manufacturing and Machine Learning (RAMMML)-2023 | Department of mechanical engineering, YCCE, Nagpur | 2nd to 4th Feb 2023 |
| 12 | RushabhBokde | Design and development of Automated Dimension Measurement System by Image Processing | International Conference | Recent Advances in Materials, Manufacturing and Machine Learning (RAMMML)-2023 | Department of mechanical engineering, YCCE, Nagpur | 2nd to 4th Feb 2023 |
| 13 | DIPALI KALE | 3d printer filament making machine using PET bottles | International Conference | Recent Advances in Materials, Manufacturing and Machine Learning (RAMMML)-2023 | Department of mechanical engineering, YCCE, Nagpur | 2nd to 4th Feb 2023 |
| 14 | Yash Ramesh Kumbhare | Bharat Thyrometer | International Conference | Recent Advances in Materials, Manufacturing and Machine Learning (RAMMML)-2023 | Department of mechanical engineering, YCCE, Nagpur | 2nd to 4th Feb 2023 |
| 15 | ShwetalBadwaik | Introduction to mileage booster for electric vehicle | International Conference | Recent Advances in Materials, Manufacturing and Machine Learning (RAMMML)-2023 | Department of mechanical engineering, YCCE, Nagpur | 2nd to 4th Feb 2023 |
| 16 | Revan Zope | OPTIMIZATION OF THE PROCESS PARAMETER USING CUSTOMIZED DUAL EXTRUDER 3D PRINTER | International Conference | Recent Advances in Materials, Manufacturing and Machine Learning (RAMMML)-2023 | Department of mechanical engineering, YCCE, Nagpur | 2nd to 4th Feb 2023 |
| 17 | Bhavesh musale | Design and development of rideable luggage | International Conference | Recent Advances in Materials, Manufacturing and Machine Learning (RAMMML)-2023 | Department of mechanical engineering, YCCE, Nagpur | 2nd to 4th Feb 2023 |
| 18 | Mansi Kirloskar | A Literature Survey on Welding Application of Robot Arm | International Conference | Recent Advances in Materials, Manufacturing and Machine Learning (RAMMML)-2023 | Department of mechanical engineering, YCCE, Nagpur | 2nd to 4th Feb 2023 |
| 19 | Vishal sureshborule | A mini-review on continious Passive motion machine | International Conference | Recent Advances in Materials, Manufacturing and Machine Learning (RAMMML)-2023 | Department of mechanical engineering, YCCE, Nagpur | 2nd to 4th Feb 2023 |
| 20 | NinadJawajwar | Implementation of origami application in a solar PV system: A review | International Conference | Recent Advances in Materials, Manufacturing and Machine Learning (RAMMML)-2023 | Department of mechanical engineering, YCCE, Nagpur | 2nd to 4th Feb 2023 |
| 21 | Aditya Ramteke | Investigation of pre and post harvesting factors affecting Onions: A Review | International Conference | Recent Advances in Materials, Manufacturing and Machine Learning (RAMMML)-2023 | Department of mechanical engineering, YCCE, Nagpur | 2nd to 4th Feb 2023 |
| 22 | Kevin Daniel | Review Paper on Smart identified Railway Crossing | International Conference | Recent Advances in Materials, Manufacturing and Machine Learning (RAMMML)-2023 | Department of mechanical engineering, YCCE, Nagpur | 2nd to 4th Feb 2023 |
| 23 | DnyandeepRewatkar | Review on Battery Management Systems in Electric Vehicles | International Conference | Recent Advances in Materials, Manufacturing and Machine Learning (RAMMML)-2023 | Department of mechanical engineering, YCCE, Nagpur | 2nd to 4th Feb 2023 |
| 24 | Akash Bhawalkar | A LITERATURE SURVEY ON OPTIMIZATION OF THE DRILLING PROCESS FOR DIFFERENT MATERIALS | International Conference | Recent Advances in Materials, Manufacturing and Machine Learning (RAMMML)-2023 | Department of mechanical engineering, YCCE, Nagpur | 2nd to 4th Feb 2023 |
| 25 | PurveshRangari | Advance Intravenous Peripheral Cannula: A Review | International Conference | Recent Advances in Materials, Manufacturing and Machine Learning (RAMMML)-2023 | Department of mechanical engineering, YCCE, Nagpur | 2nd to 4th Feb 2023 |
| 26 | Nayan korde | Review On Machines Made For Cotton Crop Harvesting. | International Conference | Recent Advances in Materials, Manufacturing and Machine Learning (RAMMML)-2023 | Department of mechanical engineering, YCCE, Nagpur | 2nd to 4th Feb 2023 |
| 27 | PriyanshuAshtikar | POWER GENERATION FOR HIGHWAYS USING A COMPACT ADJUSTABLE VERTICAL AXIS WIND TURBINE | International Conference | Recent Advances in Materials, Manufacturing and Machine Learning (RAMMML)-2023 | Department of mechanical engineering, YCCE, Nagpur | 2nd to 4th Feb 2023 |
| 28 | AdeshMeshram | A review on Actuation of Shape Memory Alloy | International Conference | Recent Advances in Materials, Manufacturing and Machine Learning (RAMMML)-2023 | Department of mechanical engineering, YCCE, Nagpur | 2nd to 4th Feb 2023 |
| 29 | Vaishnavi Bharsakle | A Mini-Review On Adjustable 3D-Printed Wrist Orthosis | International Conference | Recent Advances in Materials, Manufacturing and Machine Learning (RAMMML)-2023 | Department of mechanical engineering, YCCE, Nagpur | 2nd to 4th Feb 2023 |
| 30 | Prathamesh Rajesh Dangre | A Review Paper on Performance Parameters of Pneumatic Ramp. | International Conference | Recent Advances in Materials, Manufacturing and Machine Learning (RAMMML)-2023 | Department of mechanical engineering, YCCE, Nagpur | 2nd to 4th Feb 2023 |
| 31 | Arpita Pathade, | Streamlining process flow of manufacturing process in an Aluminium foil rewinding industry- A case study | International Conference | Recent Advances in Materials, Manufacturing and Machine Learning (RAMMML)-2023 | Department of mechanical engineering, YCCE, Nagpur | 2nd to 4th Feb 2023 |
| 32 | PraharshKatole | A Review Paper on best practices of Yarn Winding Machine. | International Conference | Recent Advances in Materials, Manufacturing and Machine Learning (RAMMML)-2023 | Department of mechanical engineering, YCCE, Nagpur | 2nd to 4th Feb 2023 |
| 33 | Dheeraj Karadbhajne | Development of improved spraying turntable for the primer shop: A review | International Conference | Recent Advances in Materials, Manufacturing and Machine Learning (RAMMML)-2023 | Department of mechanical engineering, YCCE, Nagpur | 2nd to 4th Feb 2023 |
| 34 | Ashutosh Gedam | Grain Drying Process In India | International Conference | Recent Advances in Materials, Manufacturing and Machine Learning (RAMMML)-2023 | Department of mechanical engineering, YCCE, Nagpur | 2nd to 4th Feb 2023 |
| 35 | SHREYASH NARESH BHAISWAR | Numerical Optimization of EDM Process Parameters: An approach | International Conference | Recent Advances in Materials, Manufacturing and Machine Learning (RAMMML)-2023 | Department of mechanical engineering, YCCE, Nagpur | 2nd to 4th Feb 2023 |
| 36 | Bhushan Ramesh Kamdi | Study on Implementation of lean six Sigma in small and medium scale industries | International Conference | Recent Advances in Materials, Manufacturing and Machine Learning (RAMMML)-2023 | Department of mechanical engineering, YCCE, Nagpur | 2nd to 4th Feb 2023 |
| 37 | NmanshuKolhe | Implementation of 5S methodology : Review paper | International Conference | Recent Advances in Materials, Manufacturing and Machine Learning (RAMMML)-2023 | Department of mechanical engineering, YCCE, Nagpur | 2nd to 4th Feb 2023 |
| 38 | Rahul Nandankar | A LITERATURE REVIEW TO ENHANCE THE EFFICIENCY OF PHOTOVOLTAIC PANEL BY STATIONARY COOLING | International Conference | Recent Advances in Materials, Manufacturing and Machine Learning (RAMMML)-2023 | Department of mechanical engineering, YCCE, Nagpur | 2nd to 4th Feb 2023 |
| 39 | Pragati Kumbhare | Review on Earth Heat Tube Exchanger | International Conference | Recent Advances in Materials, Manufacturing and Machine Learning (RAMMML)-2023 | Department of mechanical engineering, YCCE, Nagpur | 2nd to 4th Feb 2023 |
| 40 | Dhiraj Ugemuge | Improvement Of Street Light Pole | International Conference | Recent Advances in Materials, Manufacturing and Machine Learning (RAMMML)-2023 | Department of mechanical engineering, YCCE, Nagpur | 2nd to 4th Feb 2023 |
| 41 | Gaurav barekar | A review Paper on Selection of Hydrogen-rich fuel And their Performing Parameters in PEMFC | International Conference | Recent Advances in Materials, Manufacturing and Machine Learning (RAMMML)-2023 | Department of mechanical engineering, YCCE, Nagpur | 2nd to 4th Feb 2023 |
| 42 | Amit prasad | Automatic Wheelchair Convertible Stretcher :- A Review | International Conference | Recent Advances in Materials, Manufacturing and Machine Learning (RAMMML)-2023 | Department of mechanical engineering, YCCE, Nagpur | 2nd to 4th Feb 2023 |
| 43 | Akshay Patil | Solar Photovoltaic Water Pumping System – A Review | International Conference | Recent Advances in Materials, Manufacturing and Machine Learning (RAMMML)-2023 | Department of mechanical engineering, YCCE, Nagpur | 2nd to 4th Feb 2023 |
| 44 | Abhishek Chandanbatwe | LITERATURE REVIEW OF HEAT TRANSFER IN CONICAL TUBE HEAT EXCHANGER WITH TWISTED STRIP INSERTS INSIDE INNER CIRCULAR TUBE | International Conference | Recent Advances in Materials, Manufacturing and Machine Learning (RAMMML)-2023 | Department of mechanical engineering, YCCE, Nagpur | 2nd to 4th Feb 2023 |
| 45 | Aditya Kailash Nagpure | Review paper on developement and design of hybrid solar and vertical axis wind turbine system | International Conference | Recent Advances in Materials, Manufacturing and Machine Learning (RAMMML)-2023 | Department of mechanical engineering, YCCE, Nagpur | 2nd to 4th Feb 2023 |
| 46 | Atharva Paturde | Development of a fully Automatic Portable light-load Washing Machine for Bachelors. | International Conference | Recent Advances in Materials, Manufacturing and Machine Learning (RAMMML)-2023 | Department of mechanical engineering, YCCE, Nagpur | 2nd to 4th Feb 2023 |
| 47 | AJIT SINGH SHEKHAWAT | Plastic And Biomedical Waste Generation And Management Via Pyrolysis : A Review | International Conference | Recent Advances in Materials, Manufacturing and Machine Learning (RAMMML)-2023 | Department of mechanical engineering, YCCE, Nagpur | 2nd to 4th Feb 2023 |
| 48 | Anitya Nikose | A Literature Review of Portable Battery operated Milking Machine | International Conference | Recent Advances in Materials, Manufacturing and Machine Learning (RAMMML)-2023 | Department of mechanical engineering, YCCE, Nagpur | 2nd to 4th Feb 2023 |
| 49 | K s Bais | AUTOMATED DUSTER FOR CLEANING OF GREEN BOARD | International Conference | Recent Advances in Materials, Manufacturing and Machine Learning (RAMMML)-2023 | Department of mechanical engineering, YCCE, Nagpur | 2nd to 4th Feb 2023 |
| 50 | Jitesh Polojwar | Integrated Pneumatic Jack for four wheeler Vehicle – A Survey | International Conference | Recent Advances in Materials, Manufacturing and Machine Learning (RAMMML)-2023 | Department of mechanical engineering, YCCE, Nagpur | 2nd to 4th Feb 2023 |
| 51 | PRATIK PATIL. | Design and fabrication of automatic T-shirt folding machine with the help of pneumatic | International Conference | Recent Advances in Materials, Manufacturing and Machine Learning (RAMMML)-2023 | Department of mechanical engineering, YCCE, Nagpur | 2nd to 4th Feb 2023 |
| 52 | Hitesh Choudhary | Conceptual design of PVC Powder/Granules and Oil pouring machine for proper blending proportion- A case study | International Conference | Recent Advances in Materials, Manufacturing and Machine Learning (RAMMML)-2023 | Department of mechanical engineering, YCCE, Nagpur | 2nd to 4th Feb 2023 |
| 53 | AkashKatkade | Optimization of titanium skull implant for 3d printing in cranioplasty | International Conference | Recent Advances in Materials, Manufacturing and Machine Learning (RAMMML)-2023 | Department of mechanical engineering, YCCE, Nagpur | 2nd to 4th Feb 2023 |
| 54 | Rochak Raut | Review: Passive Direct Liquid Alkaline fuel cells. | International Conference | Recent Advances in Materials, Manufacturing and Machine Learning (RAMMML)-2023 | Department of mechanical engineering, YCCE, Nagpur | 2nd to 4th Feb 2023 |
| 55 | DEVESH KADEKAR | Drying process of Bitter Gourd: A Review | International Conference | Recent Advances in Materials, Manufacturing and Machine Learning (RAMMML)-2023 | Department of mechanical engineering, YCCE, Nagpur | 2nd to 4th Feb 2023 |
| 56 | ChitranshiTagade | FIXED BED DRYER FOR DRYING OF GREEN PEAS | International Conference | Recent Advances in Materials, Manufacturing and Machine Learning (RAMMML)-2023 | Department of mechanical engineering, YCCE, Nagpur | 2nd to 4th Feb 2023 |
| 57 | Avinash Thakare | Measurement of flank wears using edge detection method | International Conference | Recent Advances in Materials, Manufacturing and Machine Learning (RAMMML)-2023 | Department of mechanical engineering, YCCE, Nagpur | 2nd to 4th Feb 2023 |
| 58 | Aditya Thaware | Critical review on weldability of 316 Austenitic and 410 Martensitic stainless steel | International Conference | Recent Advances in Materials, Manufacturing and Machine Learning (RAMMML)-2023 | Department of mechanical engineering, YCCE, Nagpur | 2nd to 4th Feb 2023 |
| 59 | Ashish Umarkar | Direct liquid Fuel cell :- challenges and Advances | International Conference | Recent Advances in Materials, Manufacturing and Machine Learning (RAMMML)-2023 | Department of mechanical engineering, YCCE, Nagpur | 2nd to 4th Feb 2023 |
| Sr. No. | Title of Program | Organised BY | Name of Participants | Completion Date |
| 1 | VAC on “Advances in thermal enginnering” | ME, YCCE | 46 | 08-11-2025 |
| 2 | VAC on “Introduction to solidworks” | ME, YCCE | 30 | 28-11-2025 |
| 3 | VAC on “Ansys APDL” | ME, YCCE | 24 | 22-11-2025 |
| 4 | VAC on ” Introduction to MATLAB software with hand -on experience with MATLAB on-line” | ME, YCCE | 104 | 16-10-2025 |
| 5 | VAC on ” Blender” | ME, YCCE | 116 | 14-11-2025 |
| 6 | VAC on ” Scilab” | ME, YCCE | 15 | 14-11-2025 |
| 7 | VAC on ” Qcad” | ME, YCCE | 93 | 14-11-2025 |
| 8 | Resilience Engineering: Bouncing Back from CAT Failures to IIM Success | ME, YCCE | 50 | 29/07/2025 |
| 9 | AI & Leadership: How Future Leaders Can Leverage Technology | ME, YCCE | 50 | 29/07/2025 |
| 10 | The Impact of biulding information modeling on Mechanical Engineerers Innovation | ME, YCCE | 60 | 18/09/2025 |
| 11 | Jobs v/s higher studies v/s business: the carrer dilemma | ME, YCCE | 96 | 26/09/2025 |
| 12 | Your Career, Your Choice: Evaluating Job Offers, Academic Programs | ME, YCCE | 96 | 26/09/2025 |
| 13 | Study in abroad orientation program | ME, YCCE | 50 | 15/10/2025 |
Completed Academic Programs
| Title of Program | Organised By | Completion Date |
| VAC on “Design of Experiments” | YCCE | 26-04-2025 |
| VAC on “FEA Analysis” | YCCE | 15-04-2025 |
| VAC on “Industrial Safety” | YCCE | 04-05-2025 |
| How to crack CAT | YCCE | 23-07-2024 |
| Advance Approaches for Conquering the CAT Examination | YCCE | 16-08-2024 |
| Students psychology for GATE exam and other competitive exam | YCCE | 16-10-2024 |
| Project training and design drafting | YCCE | 22-10-2024 |
| Opportunities for Students in Research and Development in the USA | YCCE | 13-01-2025 |
| Track to Future Railway Engineering for Mechanical Engineers | YCCE | 21-02-2025 |
| Importance of Higher Study and Research for Future Prospective | YCCE | 27-02-2025 |
| Research Funding Proposal | YCCE | 03-03-2025 |
| Application of Catia Software and Its Benefits | YCCE | 03-12-2025 |
| Prospective for Higher Studies and Opportunities in Germany | YCCE | 21-03-2025 |
| Engineering of Leadership: Technicalities in CAT & Life through IIM | YCCE | 13-04-2025 |
| Project Training and Design Drafting | YCCE | 16-04-2024 |
| Guidance on Aptitude Test, CRT, CAT & Different Government Exam | YCCE | 17-04-2025 |
Workshop/seminar/Training attended by students (2023-24)
| Sr. No. | Title of Program | Organised BY | Completion Date |
| 1 | VAC on “Electric and hybrid vehicle ” | YCCE | 18/12/2023 to 23/12/2023 |
| 2 | VAC on “Basics of computational tools” | YCCE | 18/03/2024 to 23/03/2024 |
| 3 | VAC on “Basics of computational tools” | YCCE | 21/05/2024 |
| 4 | VAC on “Computer aided modelling by solidworks” | YCCE | 16 -03-2024 to 27-04-2024 |
| 5 | VAC on ” Industrial trends in manufacturing systems” | YCCE | 16-09-2023 to 22-10-2023 |
| 6 | Importance of research paper and research work in future | YCCE | 16-02-2024 to 20-03-2024 |
| 7 | Industrial Robotics & Automation and It’s Future Opportunities | YCCE | 16-02-2024 to 06-04-2024 |
| 8 | Career Opportunities and Career guidance | YCCE | 16 -03-2024 to 13-04- 2024 |
| 9 | Mechanical Engineering Career Paths | YCCE | 04-10-2023 |
| 10 | UPSC and MPSC career guidance | YCCE | 04-10-2023 |
| 11 | CAT, IPMAT , CLAT , SSE Exam preparation | YCCE | 08-11-2023 |
| 12 | How to Crack GATE/ESE exams in First Attempt | YCCE | 20-12-2023 |
| 13 | How to conquer GATE Examination | YCCE | 20-02-2024 |
| 14 | Er. Harish Deshpande, Director, NDT solutions pvt, ltd, delivers expert Lecture on Manufacturing processes (Professor of Practice) | YCCE | 13-03-2024 |
| 15 | One-day workshop on Project Management & its application by Mr. Shounak Totade, Nikhil Furniture, MIDC Nagpur | YCCE | 14-03-2024 |
| 16 | One day workshop on Project and Safety Management by Dr. Amit Dutta Mecgale Pneumatics MIDC Nagpur | YCCE | 16-05-2024 |
| 17 | One day workshop on Production process of Parle-G Biscuits and other products in Parle-G Industry by Mr. Ajay Pethkar , Parle-G Industry , Bahadura Nagpur | YCCE | 23-04-24 to 26.04.2024 |
| 18 | One day workshop on Industrial Project, Internship, and Placement Opportunities at Plastic Industry by Mr. Tanmay Deshmukh, Tanmay Industry, MIDC Nagpur | YCCE | 28/07/2023 |
| 19 | One day workshop on Supply Chain Management and its applications by Mr. R. S. Chandna, Kinetic Gears Sourabh Jamdar, Mahalasa Tool craft | YCCE | 21/08/2023 |
| 20 | One day workshop on Internship, and Placement Opportunities at Mahindra by Mr. Ashish Subhedar, Ms. Shivani, Ms. Priya Shanu, Mahindra, MIDC Nagpur | YCCE | 21/09/2023 |
Workshop/seminar/Training attended by students (2022-23)
| Sr. No. | Title of Program | Organised by | Name of Participants | Completion Date |
| 1 | Training | ISRO,Government of India-IIRS Outreach Program-“Geo-data sharing and Cyber Security” | prachiteshWakde | 21/10/2022 |
| 2 | Workshop | ISRO,Government of India-IIRS Outreach Program-Applications of Geospatial Technology in Paleochannel Studies: Potential And Future Trends | prachiteshWakde | 10-11-2022 |
| 3 | Training | S.S.CAD PRO & MKCL- Certificate course in Creo | Sharvari Pathak | 30/06/2022 |
| 4 | Workshop | PDPM Jabalpur-NEP 2020 IN Higher Education, Shaping the Shapers Workshop in collab. With RFRF and Bhartiya Shikshan Mandal | Sharvari Pathak | 27/12/2022 |
| 5 | Short Term Training Program (STTP) | Techgyan Technologies | Mohammad Atif Khan | 31/12/2022 |
| 6 | Short Term Training Program (STTP) | Google Digital Unlocked- The Fundamentals of Digital Marketing | Mohammad Atif Khan | 26/10/2022 |
| 7 | Short Term Training Program (STTP) | Prime Minister’s Research Fellowship Scheme , IISC Bangalore and AICTE | Prathmesh Shah | Apr-22 |
| 8 | Short Term Training Program (STTP) | IIT Bombay | Gagan Kaware | 10-09-2022 |
| 9 | Short Term Training Program (STTP) | IIT Bombay | Gagan Kaware | 11-09-2022 |
| 10 | Short Term Training Program (STTP) | IIT Bombay | Ram Sant | 10-09-2022 |
| 11 | Short Term Training Program (STTP) | GUVI and GOOGLE for Education | Atif Khan | 14/07/2022 |
| 12 | Short Term Training Program (STTP) | Elsevier Academy | Sharvari Pathak | 13/12/2022 |
| 13 | Short Term Training Program (STTP) | TCS ion Career edge- Young Professional | Sharvari Pathak | 15/02/2023 |
| 14 | Short Term Training Program (STTP) | Barclay Lifeskill Programme | SahadeoGabhane | 14/05/2022 |
| 15 | Training | Linked in Learning- SOLIDWORKS 2019 Essential Training | Mansi Kirloskar | 21/07/2022 |
| 16 | Training | Linked in Learning- Project Management: Technical Projects | Mansi Kirloskar | 07-12-2023 |
| 17 | Short Term Training Program (STTP) | IRO YCCEAND Department of Electronics Engineering ,YCCE | Prathmesh Shah | 30/04/2022 |
| 18 | Training | Intellectual Property India (IP), Office of Controller General of Patents,Design and Trade Marks- IP Awareness/Training Programme | Mohammad Atif Khan | 02-06-2023 |
| 19 | Workshop | Techgyan Technologies & Abhyudaya IIT Bombay- Machine Learning Workshop | Mohammad Atif Khan | 31/12/2022 |
| 20 | Workshop | Techgyan Technologies & Abhyudaya IIT Bombay- Internet of Things IoT Workshop | Mohammad Atif Khan | 31/12/2022 |
| 21 | Workshop | Techgyan Technologies & Abhyudaya IIT Bombay- Android App Development Workshop | Mohammad Atif Khan | 31/12/2022 |
| 22 | Short Term Training Program (STTP) | GUVI and GOOGLE for Education- Basics of Internet | Atif Khan | 14/07/2022 |
| 23 | Workshop | Techfest IIT Bombay-Machine Learning | Rushi Shukla | 17/12/2022 |
| 24 | Workshop | Google Digital Unlocked- The Fundamentals of Digital Marketing | Tanmay Thakre | 25/01/2023 |
| 25 | Short Term Training Program (STTP) | CATIA V-5 by Virtual SimutechPvt.Ltd.Pune Instructor:Mr.Anil Jain &Mr.amitBadwaik | MISHRA SHRADDHA VIJAYRAO | 17th Jan to 3rd Feb, 2023 (20Hrs) |
| 25 | Short Term Training Program (STTP) | CATIA V-5 by Virtual SimutechPvt.Ltd.Pune Instructor:Mr.Anil Jain &Mr.amitBadwaik | GAWANDE KUSHAL PRAMOD | 17th Jan to 3rd Feb, 2023 (20Hrs) |
| 26 | Short Term Training Program (STTP) | CATIA V-5 by Virtual SimutechPvt.Ltd.Pune Instructor:Mr.Anil Jain &Mr.amitBadwaik | BHARADKAR AKSHAY DHARMENDRA | 17th Jan to 3rd Feb, 2023 (20Hrs) |
| 27 | Short Term Training Program (STTP) | CATIA V-5 by Virtual SimutechPvt.Ltd.Pune Instructor:Mr.Anil Jain &Mr.amitBadwaik | HAJARE DHANANJAY SURESH | 17th Jan to 3rd Feb, 2023 (20Hrs) |
| 28 | Short Term Training Program (STTP) | CATIA V-5 by Virtual SimutechPvt.Ltd.Pune Instructor:Mr.Anil Jain &Mr.amitBadwaik | BADRI IBRAHIM MURTAZA | 17th Jan to 3rd Feb, 2023 (20Hrs) |
| 29 | Short Term Training Program (STTP) | CATIA V-5 by Virtual SimutechPvt.Ltd.Pune Instructor:Mr.Anil Jain &Mr.amitBadwaik | MAROTKAR SIMRAN ASHISH | 17th Jan to 3rd Feb, 2023 (20Hrs) |
| 30 | Short Term Training Program (STTP) | CATIA V-5 by Virtual SimutechPvt.Ltd.Pune Instructor:Mr.Anil Jain &Mr.amitBadwaik | SHENDRE DEVESH SURENDRA | 17th Jan to 3rd Feb, 2023 (20Hrs) |
| 31 | Short Term Training Program (STTP) | CATIA V-5 by Virtual SimutechPvt.Ltd.Pune Instructor:Mr.Anil Jain &Mr.amitBadwaik | KATRE BHIVESH BHUPENDRA | 17th Jan to 3rd Feb, 2023 (20Hrs) |
| 32 | Short Term Training Program (STTP) | CATIA V-5 by Virtual SimutechPvt.Ltd.Pune Instructor:Mr.Anil Jain &Mr.amitBadwaik | PANDE SAURABH VIJAY | 17th Jan to 3rd Feb, 2023 (20Hrs) |
| 33 | Short Term Training Program (STTP) | CATIA V-5 by Virtual SimutechPvt.Ltd.Pune Instructor:Mr.Anil Jain &Mr.amitBadwaik | BAIS AYUSHI SUNILSINGH | 17th Jan to 3rd Feb, 2023 (20Hrs) |
| 34 | Short Term Training Program (STTP) | CATIA V-5 by Virtual SimutechPvt.Ltd.Pune Instructor:Mr.Anil Jain &Mr.amitBadwaik | SATFALE SAILI RAJU | 17th Jan to 3rd Feb, 2023 (20Hrs) |
| 35 | Short Term Training Program (STTP) | CATIA V-5 by Virtual SimutechPvt.Ltd.Pune Instructor:Mr.Anil Jain &Mr.amitBadwaik | KULSANGE NEMASHRI KAWDUJI | 17th Jan to 3rd Feb, 2023 (20Hrs) |
| 36 | Short Term Training Program (STTP) | CATIA V-5 by Virtual SimutechPvt.Ltd.Pune Instructor:Mr.Anil Jain &Mr.amitBadwaik | MASKE PARTH PRASHANT | 17th Jan to 3rd Feb, 2023 (20Hrs) |
| 37 | Short Term Training Program (STTP) | CATIA V-5 by Virtual SimutechPvt.Ltd.Pune Instructor:Mr.Anil Jain &Mr.amitBadwaik | KHOBARAGADE PRASAD PRKASH | 17th Jan to 3rd Feb, 2023 (20Hrs) |
| 38 | Short Term Training Program (STTP) | CATIA V-5 by Virtual SimutechPvt.Ltd.Pune Instructor:Mr.Anil Jain &Mr.amitBadwaik | CHAVHAN SAKSHI VILASRAO | 17th Jan to 3rd Feb, 2023 (20Hrs) |
| 39 | Short Term Training Program (STTP) | CATIA V-5 by Virtual SimutechPvt.Ltd.Pune Instructor:Mr.Anil Jain &Mr.amitBadwaik | ATHAWALE PAVITRA SURESH | 17th Jan to 3rd Feb, 2023 (20Hrs) |
| 40 | Short Term Training Program (STTP) | CATIA V-5 by Virtual SimutechPvt.Ltd.Pune Instructor:Mr.Anil Jain &Mr.amitBadwaik | BAMBAL HIMANSHU SURENDRA | 17th Jan to 3rd Feb, 2023 (20Hrs) |
| 41 | Short Term Training Program (STTP) | CATIA V-5 by Virtual SimutechPvt.Ltd.Pune Instructor:Mr.Anil Jain &Mr.amitBadwaik | TATHOD NIRAJ VINAYAK | 17th Jan to 3rd Feb, 2023 (20Hrs) |
| 42 | Short Term Training Program (STTP) | CATIA V-5 by Virtual SimutechPvt.Ltd.Pune Instructor:Mr.Anil Jain &Mr.amitBadwaik | KAPKAR DURGESH GANESH | 17th Jan to 3rd Feb, 2023 (20Hrs) |
| 43 | Short Term Training Program (STTP) | CATIA V-5 by Virtual SimutechPvt.Ltd.Pune Instructor:Mr.Anil Jain &Mr.amitBadwaik | GAIKWAD MOHIT ANIL | 17th Jan to 3rd Feb, 2023 (20Hrs) |
| 44 | Short Term Training Program (STTP) | CATIA V-5 by Virtual SimutechPvt.Ltd.Pune Instructor:Mr.Anil Jain &Mr.amitBadwaik | BHANDARE METTA DNYANESHWAR | 17th Jan to 3rd Feb, 2023 (20Hrs) |
| 45 | Short Term Training Program (STTP) | CATIA V-5 by Virtual SimutechPvt.Ltd.Pune Instructor:Mr.Anil Jain &Mr.amitBadwaik | ANSHUMAN PRAFULL MANGRULKAR | 17th Jan to 3rd Feb, 2023 (20Hrs) |
| 46 | Short Term Training Program (STTP) | CATIA V-5 by Virtual SimutechPvt.Ltd.Pune Instructor:Mr.Anil Jain &Mr.amitBadwaik | GAIKI TEJAS RAMKRUSHNA | 17th Jan to 3rd Feb, 2023 (20Hrs) |
| 47 | Short Term Training Program (STTP) | CATIA V-5 by Virtual SimutechPvt.Ltd.Pune Instructor:Mr.Anil Jain &Mr.amitBadwaik | BHAISARE APEKSHA KISHOR | 17th Jan to 3rd Feb, 2023 (20Hrs) |
| 48 | Short Term Training Program (STTP) | CATIA V-5 by Virtual SimutechPvt.Ltd.Pune Instructor:Mr.Anil Jain &Mr.amitBadwaik | MENDHE TUSHAR RAJESH | 17th Jan to 3rd Feb, 2023 (20Hrs) |
| 49 | Short Term Training Program (STTP) | CATIA V-5 by Virtual SimutechPvt.Ltd.Pune Instructor:Mr.Anil Jain &Mr.amitBadwaik | GEDAM DIPALI BHAGWAN | 17th Jan to 3rd Feb, 2023 (20Hrs) |
| 50 | Short Term Training Program (STTP) | CATIA V-5 by Virtual SimutechPvt.Ltd.Pune Instructor:Mr.Anil Jain &Mr.amitBadwaik | DHOKE AKASH BHOJRAJ | 17th Jan to 3rd Feb, 2023 (20Hrs) |
| 51 | Short Term Training Program (STTP) | CATIA V-5 by Virtual SimutechPvt.Ltd.Pune Instructor:Mr.Anil Jain &Mr.amitBadwaik | DHABARDE HIMANSHU RAMESHWAR | 17th Jan to 3rd Feb, 2023 (20Hrs) |
| 52 | Short Term Training Program (STTP) | CATIA V-5 by Virtual SimutechPvt.Ltd.Pune Instructor:Mr.Anil Jain &Mr.amitBadwaik | KANNAKE DHARMRAJ DEVANAND | 17th Jan to 3rd Feb, 2023 (20Hrs) |
| 53 | Short Term Training Program (STTP) | CATIA V-5 by Virtual SimutechPvt.Ltd.Pune Instructor:Mr.Anil Jain &Mr.amitBadwaik | SHELKE NAVNEET SUDHIRRAO | 17th Jan to 3rd Feb, 2023 (20Hrs) |
| 54 | Short Term Training Program (STTP) | CATIA V-5 by Virtual SimutechPvt.Ltd.Pune Instructor:Mr.Anil Jain &Mr.amitBadwaik | DHOK PRAJWAL BABA | 17th Jan to 3rd Feb, 2023 (20Hrs) |
| 55 | Short Term Training Program (STTP) | CATIA V-5 by Virtual SimutechPvt.Ltd.Pune Instructor:Mr.Anil Jain &Mr.amitBadwaik | BHIVGADE AVIRAL SANJAY | 17th Jan to 3rd Feb, 2023 (20Hrs) |
| 56 | Short Term Training Program (STTP) | CATIA V-5 by Virtual SimutechPvt.Ltd.Pune Instructor:Mr.Anil Jain &Mr.amitBadwaik | DHAPODKAR ADITYA DILIP | 17th Jan to 3rd Feb, 2023 (20Hrs) |
| 57 | Workshop | Automobile at Techfest. IIT Bombay | Ayush Vinod Narkhede | 16-12-2022 |
Workshop/seminar/Training attended by students (2021-22)
| S.N | Title of Programme | Organised by | Name of Participant | Exam date |
| 1 | NX-CAM, | Siemens Centre of Excellence for Digital Manufacturing and Robotics (NAFETIC) | Bhushan kondalkar | 24-09-2021 |
| 2 | Plant design and management system (pdms) | AVEVA technologies | Pratik Ramajilanjewar | 20-11-2021 |
| 3 | C# Console and Windows Forms Development with LINQ & ADO.NET | ûdemy | Devanshraut | 30-11-2021 |
| 4 | Plant design and management system | AVEVA technologies | Ankit funde | 10-12-2021 |
| 5 | Life skill program | Barclays | Faraz Khan | 24-10-2021 |
| 6 | Python language | Binary Brains | Atharva | 01-09-2021 |
| 7 | Core java | Ccit classes | VedantiHande | 01-07-2021 |
| 8 | Nx cam basic to advanced | Siemens Centre of Excellence for Digital Manufacturing and Robotics (NAFETIC) | UJWAL KISHOR GHATE | 25-11-2021 |
| 9 | Nx cam basic to advanced | Siemens Centre of Excellence for Digital Manufacturing and Robotics (NAFETIC) | Prathamesh Rajesh Dangre | 23-10-2021 |
| 10 | ELECTRIC AND HYBRID VEHICLES | CIIIT(A Joint Initiative of Tata Technologies & GCOE Chandrapur) | Hemant Khiratkar | 15-10-2021 |
| 11 | Machine Learning With Python | Cognitive Classes | AMIT PRASAD | 21-11-2021 |
| 12 | NX CAM | Siemens Centre of Excellence for Digital Manufacturing and Robotics (NAFETIC) | Shreyashwakde | 23-10-2021 |
| 13 | “Introduction& Application of CAE using ANSYS†| Mechanical Engineering Department at YCCE Nagpur | Akanksha Bandewar | 10-08-2021 |
| 14 | CATIA PROFESSIONAL | DCS | Ninad Ramesh Jawajwar | 29-09-2021 |
| 15 | Graphic programming in C | Department of electronic engineering | Siddheshwarganeshyerne | 18-10-2021 |
| 16 | “MATLAB,MULTISIM& ORCAD” | Department of electronics and telecommunications YCCE | Aniket Babhale | 09-10-2021 |
| 17 | Introduction and application of CAE using ANSYS | Department of mechanical engineering (D.Y.SHAHRE) | Saurabh uttamyerpude | 16-11-2021 |
| 18 | ANSYS | Department of mechanical engineering , YCCE | Hardik lohare | 21-10-2021 |
| 19 | Computer aided Manufacturing using NX-CAM | Siemens Centre of Excellence for Digital Manufacturing and Robotics (NAFETIC) | Divyanshudangore | 01-10-2021 |
| 20 | Introduction & Application of CAE using ANSYS | Department of Mechanical engineering at YCCE | Vedant Yerpude | 11-09-2021 |
| 21 | PLANT DESIGN AND MANAGEMENT SYSTEM | DEPARTMENT OF MECHANICAL ENGINEERING YCCE | PRATHAMESH KAMLESHKUMAR SHAH | 20-11-2021 |
| 22 | INTRODUCTION AND APPLICATION USING CAE AND ANSYS | DEPARTMENT OF MECHANICAL ENGINEERING YCCE,NAGPUR | PRATHAMESH KAMLESHKUMAR SHAH | 29-10-2021 |
| 23 | Introduction & Application of CAE using ANSYS | Department of Mechanical Engineering, YCCE, Nagpur | Akash Sakharam Kadam | 18-11-2021 |
| 24 | Introduction and application of CAE using ANSYS | Department of Mechanical Engineering, YCCE, Nagpur | Gaurav Barekar | 16-11-2021 |
| 25 | Introduction and Application of CAE Using ANSYS | Department of Mechanical Engineering, YCCE, Nagpur | Harsh Kadu | 16-11-2021 |
| 26 | BARCLAYS lifeskills programs | Dr . Uma ganesh GTT foundation | Saurabh uttamyerpude | 24-10-2021 |
| 27 | Plant Design and Management System | AVEVA technologies | Rohit R. Shende | 22-11-2021 |
| 28 | Plant Design And Management System | AVEVA technologies | Deepak Nilkanth Gawande | 22-11-2021 |
| 29 | Barcleys Life Skill Programme | Dr.Uma Ganesh | ShreyashMeshram | 24-10-2021 |
| 30 | Fundamentals of Manuscript preparation | ELSEVIER RESEARCH ACADEMY | Akshay Kulkarni | 06-10-2021 |
| 31 | GTT Barclays | GTT Barclays | Sharvari Pathak | 24-10-2021 |
| 32 | LIFE-SKILL PROGRAM | GTT FOUNDATION | Yash sorte | 24-12-2021 |
| 33 | GTT BARCLAYS life skill program | GTT foundation | SnehanshuSomkuwar | 24-10-2021 |
| 34 | Barclays Lifeskills Programme | GTT foundation | Arpita Pathade | 24-10-2021 |
| 35 | Barclays LifeSkills Programme | GTT Foundation | SHUBHAM NAMDEO BHAVE | 24-10-2021 |
| 36 | Barclays Life Skills Programme | GTT Foundation | Nikhil Santosh Tekade | 24-10-2021 |
| 37 | Barclays lifeskill program | GTT foundation | Umang Chikte | 24-10-2021 |
| 38 | GTT Barclays | GTT Foundation | Yash Belekar | 24-10-2021 |
| 39 | Barclays Life Skills Programme | GTT Foundation | Jitesh Vijay Polojwar | 24-10-2021 |
| 40 | Barclays Lifeskills Program | GTT Foundation | Mayur VinodraoPusnake | 24-10-2021 |
| 41 | Barclays Lifeskill programme | GTT foundation | Govind Prasad | 24-10-2021 |
| 42 | BARCLAYS LIFESKILL PROGRAMME | GTT FOUNDATION AND T&P CELL YCCE NAGPUR | PRATHAMESH KAMLESHKUMAR SHAH | 24-10-2021 |
| 43 | Barclays Life Skill Programme (Aptitude) | GTT FOUNDATION Collaboration with YCCE | Rushabh Vinod Bokde | 24-10-2021 |
| 44 | Basic Computer Skills | Indian Institute of Information Technology, Kota | Saurabh Vitthal Nirantar | 26-09-2021 |
| 45 | Isro | Indian space research organisation | Bhavesh musale | 28-09-2021 |
| 46 | Advanced Embedded Systems using Arduino Course | KitFlix | Tanmay Umathe | 24-08-2021 |
| 47 | PDM | ME DEPARTMENT IN ASSOCIATION WITH AVEVA TECHNOLOGYA | Saurav Gabhane | 31-10-2021 |
| 48 | Plant Design and Management system | AVEVA technologies | Kartik Wanjari | 31-10-2021 |
| 49 | Computer aided manufacturing using NX CAM basics to advance | Mechanical department YCCE | SnehanshuSomkuwar | 23-10-2021 |
| 50 | Introduction and Application of CAE using Ansys | Mechanical Engineering department | Nikhil Santosh Tekade | 11-09-2021 |
| 51 | Introduction And Application Of CAE using ANSYS | Mechanical Engineering Department at YCCE | Kshitij Rupesh Ramteke | 11-09-2021 |
| 52 | Introduction and application of CAE using ANSYS | Mechanical Engineering Department at YCCE Nagpur | SHUBHAM NAMDEO BHAVE | 11-09-2021 |
| 53 | Introduction & Application of CAE using ANSYS | Mechanical Engineering Department at Yeshwantrao Chavan College of Engineering | KunjanNinawe | 11-09-2021 |
| 54 | NX CAM | Mechanical Engineering Department, YCCE | KshitijBhadke | 25-11-2021 |
| 55 | TCS-iON Career edge – Young professionals | Mehul Mehta | ShreyashMeshram | 26-08-2021 |
| 56 | GTT Barclay’s | OTHER | Yusuf Baig | 24-10-2021 |
| 57 | Plant Design and Management System (PDMS) | AVEVA technologies | Suraj Bokade | 20-11-2021 |
| 58 | Barclays Lifeskills Programme | OTHER | ShreyashAshokraoBorghare | 24-10-2021 |
| 59 | Combined annual training camp | OTHER | Nikhil Santosh Tekade | 31-10-2021 |
| 60 | creating data visualization dashboards | OTHER | AdithyakrishnaPalery | 12-09-2021 |
| 61 | Masterclass on EV design using Matlab | Pantech learning & Skill APSSDC | Shripad Joshi | 21-09-2021 |
| 62 | Ansys | Mechanical Engineering Department at YCCE Nagpur | Nikita Gudadhe | 20-10-2021 |
| 63 | PDMS and Barclays Lifeskills Program | AVEVAtechnologies ,Dr. Uma Ganesh (GTT Foundation) | Himanshu Tajne | 20-11-2021 |
| 64 | INTRODUCTION AND APPLICATION OF CAE USING ANSYS | Mechanical Engineering Department at YCCE Nagpur | Shubham. P. Nimsarkar | 16-11-2021 |
| 65 | Introduction & Application of CAE using ANSYS | Mechanical Engineering Department at YCCE Nagpur | Rushabh Vinod Bokde | 21-10-2021 |
| 66 | Introduction and application of CAE by using ANSYS | Prof.Mechanical Engineering Department at YCCE Nagpur | ShreyashMeshram | 11-09-2021 |
| 67 | Python programming-virtual training | Ram Tavva | ShreyashMeshram | 15-09-2021 |
| 68 | Computer -Aided Manufacturing using NX-CAM Basics to Advanced | Siemens Centre of Excellence for Digital Manufacturing and Robotics (NAFETIC) | Prajwal Chamat | 23-10-2021 |
| 69 | Computer -Aided Manufacturing using NX-CAM Basics to Advanced | Siemens Centre of Excellence for Digital Manufacturing and Robotics (NAFETIC) | Atharv Paranjape | 23-10-2021 |
| 70 | NX-CAM | Siemens Centre of Excellence for Digital Manufacturing and Robotics (NAFETIC) | Sahil ashokmankar | 23-10-2021 |
| 71 | “Computer -Aided Manufacturing using NX-CAM Basics to Advanced†| Siemens Centre of Excellence for Digital Manufacturing and Robotics (NAFETIC) under the aegis of IQAC | Riya Chavhan | 23-10-2021 |
| 72 | Computer -Aided Manufacturing using NX-CAM Basics to Advanced†o | Siemens Centre of Excellence for Digital Manufacturing and Robotics (NAFETIC) under the aegis of IQAC at YCCE , Nagpur, | Ritik Rane | 23-10-2021 |
| 73 | Computer aided Manufacturing using NX-CAM Basics to advanced | Siemens Centre of Excellence for Digital Manufacturing and Robotics under the aegis of IQAC | Vaibhao Omprakash Surpam | 24-09-2021 |
| 74 | Python Core | Sololearn | SaksheeTembhurkar | 30-07-2021 |
| 75 | SQL | Sololearn | Shripad Joshi | 25-08-2021 |
| 76 | Cloud Computing | Team Pragyastra | Rushabh Vinod Bokde | 20-07-2021 |
| 77 | Introduction And Application Of ANSYS | Yashwantrao Chavan College Of Engineering, Nagpur. | Chandrakant Kshirsagar | 11-09-2021 |
| 78 | Computer aided manufacturing using NX-CAM | Siemens Centre of Excellence for Digital Manufacturing and Robotics (NAFETIC) | Dheeraj karadbhajne | 23-10-2021 |
| 79 | Introduction & Application of CAE using ANSYS | Mechanical Engineering Department at YCCE Nagpur | Dhiraj Ugemuge | 21-10-2021 |
| 80 | ANSYS | Mechanical Engineering Department at YCCE Nagpur | Akash Bhawalkar | 22-09-2021 |
| 81 | Introduction and application CAE using ANSYS | Mechanical Engineering Department at YCCE Nagpur | Parvesh Sudhakar badole | 10-08-2021 |
| 82 | Computer-Aided Manufacturing using NX-CAM | Siemens Centre of Excellence for Digital Manufacturing and Robotics (NAFETIC) | Raj Satish Gupta | 25-11-2021 |
| 83 | Plant design and management system | AVEVA technologies | Kalyani LobheshraoBawankar | 20-11-2021 |
| 84 | Computer Aided Manufacturing using NX-CAM Basics to Advanced. | Siemens Centre of Excellence for Digital Manufacturing and Robotics (NAFETIC) | Karan Thakur | 25-11-2021 |
| 85 | Nx-Cam | Siemens Centre of Excellence for Digital Manufacturing and Robotics (NAFETIC) | Pranjal Bopate | 23-12-2021 |
| 86 | PDMS | AVEVA technologies | Kawade Vaibhav Rajaram | 20-10-2021 |
| 87 | Computer -Aided Manufacturing using NX-CAM Basics to Advanced | Siemens Centre of Excellence for Digital Manufacturing and Robotics (NAFETIC) | Vedant Bachchuwar | 23-10-2021 |
| 88 | Introduction and application of CAE using ansys | Mechanical Engineering Department at YCCE Nagpur | Digvijay D. Salve | 21-10-2021 |
| 89 | Computer -Aided Manufacturing using NX-CAM Basics to Advanced | Siemens Centre of Excellence for Digital Manufacturing and Robotics (NAFETIC) | Aniruddha Jagirdar | 23-10-2021 |
| 90 | Graphics programming in C | Ycce | Lalit Bhute | 09-10-2021 |
| 91 | NX cam | Siemens Centre of Excellence for Digital Manufacturing and Robotics (NAFETIC) | Atharva Satish Nemad | 26-11-2021 |
| 92 | Gttbarclays | Ycce | Abhishek rajuchandanbatwe | 09-10-2021 |
| 93 | NX-CAM | Siemens Centre of Excellence for Digital Manufacturing and Robotics (NAFETIC) | CHETAN KONDE | 24-09-2021 |
| 94 | Introduction & Application of CAE using ANSYS | Mechanical Engineering Department at YCCE Nagpur | Saurabh Pandit | 16-11-2021 |
| 95 | Computer -Aided Manufacturing using NX-CAM -Basics to Advanced | Siemens Centre of Excellence for Digital Manufacturing and Robotics (NAFETIC) | Bhavesh Parate | 01-11-2021 |
| 96 | “Computer -Aided Manufacturing using NX-CAM Basics to Advanced | YCCE MECHANICAL DEPARTMENT | Sameer J Morey | 25-11-2021 |
| 97 | Computer -Aided Manufacturing using NX-CAM Basics to Advanced | Yeshwantrao Chavan college of Engineering | Bharat Ramesh Mate | 23-10-2021 |
| 98 | “Introduction& Application of CAE using ANSYS†| Yeshwantrao Chavan College Of Engineering Nagpur | Tejas Vishwas Dhole | 22-09-2021 |
| 99 | Introduction and application of CAE using ansys | Yeshwantraochavan College of engineering, nagpur | Rupali Surwase | 11-11-2021 |
| 100 | Plant Design and Management System | YeshwantraoChavhan College of Engineering | Ashish KailasraoYesankar | 20-11-2021 |
| 101 | Introduction &Application of CAE using Ansys | YESHWANTRAO CHAWAN COLLEGE OF ENGINEERING NAGPUR | Ankush verma | 11-09-2021 |
Workshop/seminar/Training attended by students (2020-21)
| Sr.No | Name Of Participant | Title Of Programme | Organised By |
| 1 | SanjyotDafale | Advances in Additive Manufacturing | YCCE, NAFETIC LAB |
| 2 | SHIVAM N. DEKATE | Advances in Additive Manufacturing | YCCE, NAFETIC LAB |
| 3 | ANAGHA CHIWANDE | Advances in Additive Manufacturing | YCCE, NAFETIC LAB |
| 4 | LOHITA POTUKUCHI | Advances in Additive Manufacturing | YCCE, NAFETIC LAB |
| 5 | YASH KADU | Advances in Additive Manufacturing | YCCE, NAFETIC LAB |
| 6 | ATHARVA TIKHAT | CNC PROGRAMMING, Additive Manufacturing,CAM USING NX-CAM | YCCE, NAFETIC LAB |
| 7 | ATHARVA CHOUDHARI | CNC PROGRAMMING, Additive Manufacturing,CAM USING NX-CAM | YCCE, NAFETIC LAB |
| 8 | AATISH SAHALE | CNC PROGRAMMING, Additive Manufacturing,CAM USING NX-CAM | YCCE, NAFETIC LAB |
| 9 | PRAJWAL GEDAM | CNC PROGRAMMING, Additive Manufacturing,CAM USING NX-CAM | YCCE, NAFETIC LAB |
| 10 | SARANG SOMANI | DIGITAL MFG AND ROBOTICS | YCCE, NAFETIC LAB |
| 11 | Diksha wasekar | DIGITAL MFG AND ROBOTICS | YCCE, NAFETIC LAB |
| 12 | RITIK RANE | WEB APP BEGINNER MODULE | PLEZMO,ATAL INNOVATION MISSION |
| 13 | VEDANT YERPUDE | Emotionally Intelligence Student | YCCE |
| 14 | SHIVAM N. DEKATE | MATLAB Interface | YCCE |
| 15 | JAYESH THOTE | TECHNICAL PAPER WRITING | YCCE |
| 16 | Prajwal Wanjari | TECHNICAL PAPER WRITING | YCCE |
| 17 | Diksha wasekar | TECHNICAL PAPER WRITING | YCCE |
| 18 | SHIVAM N. DEKATE | MATLAB Interface | YCCE |
| 19 | AISHWARYA WANJARI | MATLAB Interface | YCCE |
| 20 | LOHITA POTUKUCHI | MATLAB Interface | YCCE |
| 21 | YASH KADU | MATLAB Interface | YCCE |
| 22 | ARJUN GADE | MATLAB Interface | YCCE |
| 23 | YugalHulke | SCOPE AND OPPORTUNITIES IN POWER SECTOR | IEEE |
| 24 | NidhikaBagde | CATCH THE RAIN CUM WOMEN’S DAY | NEHRU YUVA KENDRA NAGPUR |
| 25 | NidhikaBagde | RACE CAR TECH COURSE | MYCAPTAIN |
| 26 | YugalHulke | Scope and opportunities in power sector | YCCE |
| 27 | Sourabh Zod | ELECTRIC VEHICLE AND BATTERY TECHNOLOGY | SKYY RIDER INSTITUTION |
| 28 | Sourabh Zod | PYTHON | NATIONAL SKILL DEVELOPMENT CORPORATION |
| 29 | AdithyakrishnaPalery | CNC MFG AND PROGRAMMING | SKYY RIDER INSTITUTION |
| 30 | AdithyakrishnaPalery | PRODUCTION PART APPROVAL PROCESS IN AUTOMOTIVE INDUSTRY | SKYY RIDER INSTITUTION |
| 31 | SanjyotDafale | INDUSTRIAL 3D PRINTING TECHNOLOGY | SKYY RIDER INSTITUTION |
| 32 | KARAN AKHARE | ABS, EBD AND ESP SAFETY FEATURES IN VEHICLES | SKYY RIDER INSTITUTION |
| 33 | KETAN FULZELE | TELESCOPIC SUSPENSION IN TWO WHEELER | SKYY RIDER INSTITUTION |
| 34 | KshitijNimje | Capability development (BEARING) | TATA STEEL |
| 35 | KshitijNimje | Capability development(HEAT TREATMENT OF STEEL) | TATA STEEL |
| 36 | SHIVAM N. DEKATE | Advanced IOS and Android Ethical Hacking Course | Udemy |
| 37 | SHIVAM N. DEKATE | Be A Pro : Industrial Panel Design Complete Guide with CATIA | Udemy |
| 38 | SHIVAM N. DEKATE | Scientist for a Day (Exploring the moons of Uranus) | NASA |
| 39 | ANKIT R.VAIDYA | C++ PROGRAMMING | Udemy |
| 40 | ANKIT R.VAIDYA | PYTHON PROGRAMMING | udemy |
| 41 | ANKIT R.VAIDYA | JAVA PROGRAMMING | udemy |
| 42 | KshitijNimje | vehicle dynamics in automobile | Udemy |
| 43 | ASHAY DIKE | EXCEL LESSONS | UDEMY |
| 44 | ASHAY DIKE | PYTHON | UDEMY |
| 45 | ANKIT R.VAIDYA | TECHNOLOGICAL BASED ENTREPRENEURSHIP DEVELOPMENT | YCCE |
| 46 | PRAJAKTA BHELAWE | TECHNOLOGICAL BASED ENTREPRENEURSHIP DEVELOPMENT | YCCE |
| 47 | SHIVAM N. DEKATE | Advanced Diploma in Heat Exchangers: Fundamental and Design Analysis | Alison Learner Record |
| 48 | RITIK RANE | WEB APP BEGINNER MODULE | ATAL INNOVATION MISSSIONNIT AAYOG |
| 49 | ATHARVA TIKHAT | BRIDGING THE GAP BETWEEN MECHANICAL INDUSTRY | AICTE |
| 50 | ANKIT R.VAIDYA | ASME EFX | ASME |
| 51 | SHIVAM N. DEKATE | Membership for All India CounsilFor Technical Skill Development (AICTSD) | AICTSD |
| 52 | AATISH SAHALE | ANTI ACCIDENTAL SYSTEM FOR DROWSINESS DETECTION USING A.I | LIVEWIRE |
| 53 | YugalHulke | Student development program | S. B. Patil College of Engineering |
| 54 | YugalHulke | Basic Geocomputation and Geowebsevices | IIRS,Dehradun, ISRO |
| 55 | YugalHulke | Geospatial Application For Disaster Risk Management | ISRO |
| 56 | YugalHulke | GRADUATE ROTATIONAL INTERNSHIP PROGRAM | SPARK FOUNDATION |
| 57 | NidhikaBagde | Nagpur photography contest | Hello Nagpur |
| 58 | AdithyakrishnaPalery | Be Vocal About Local | Ministry of electronics and information technology government of india |
| 59 | Harsh Kadu | Be Vocal About Local | Ministry of electronics and information technology government of india |
| 60 | AdithyakrishnaPalery | PROJECT MANAGEMENT PROFESSIONAL | TECH-ACT |
| 61 | AdithyakrishnaPalery | Python Course | Progate |
| 62 | KARAN AKHARE | DIESEL & GASOLINE ENGINE, ELECTRICAL, AIR CONDITIONING | BOSCH |
| 63 | Suvradeep Nandi | LEARNING DATA ANALYSIS | |
| 64 | Suvradeep Nandi | TRENDS AND APPORTUNITIES IN INDUSTRIAL ROBOTICS AND AUTOMATION | YCCE |
| 65 | LOHITA POTUKUCHI | TRENDS AND APPORTUNITIES IN INDUSTRIAL ROBOTICS AND AUTOMATION | YCCE |
| 66 | YASH KADU | TRENDS AND APPORTUNITIES IN INDUSTRIAL ROBOTICS AND AUTOMATION | YCCE |
| 67 | AATISH SAHALE | TRENDS AND APPORTUNITIES IN INDUSTRIAL ROBOTICS AND AUTOMATION | YCCE |
| 68 | RAHUL GUPTA | TRENDS AND APPORTUNITIES IN INDUSTRIAL ROBOTICS AND AUTOMATION | YCCE |
| 69 | AMEYA KUMBHARE | THINKBOTS | YCCE |
| 70 | AMEYA KUMBHARE | VIRTUAL INDUSTRY VISIT | TECHFEST |
| 71 | AISHWARYA WANJARI | MACHINE LEARNING WORSHOP | TECHFEST |
| 72 | HIMANSHU GHODMARE | MESHMERIZE | TECHFEST |
| 73 | ASHISH YESANKAR | VIRTUAL INDUSTRY VISIT | TECHFEST |
| 74 | ARJUN GADE | LEAN SIX SIGMA GREEN BELT CERTIFICATION | UDEMY |
Cultural /Sports events attended by students (2025-26)
SR. NO. | TITLE OF PROGRAMME | ORGANISED BY | NAME OF PARTICIPANT | DATE | WINNER/ PARTICIPANT | ACTIVITY |
1 | 52nd junior kabaddi State level championship | Maharashtra state kabaddi association | Deep pramod pranjale | 05-12-2025 | Winner (First Prize) | Junior kabaddi State level championship |
2 | Prarambh 1.0 | Engineering India, YCCE Nagur | Utkarsh Pardhi | 1st November 2025 | Participant | Ideathon |
3 | Krida and Sankrutik Mandadh, Kadmeshwar. | Group Dance Competition, Kadmeshwar. | Aryan Suke | 10 Jan. 2026 | Third Rank | Rangshadha Group. |