×

Mechanical Engineering

  1. Home
  2. Departments
  3. Mechanical Engineering

Publication, Patent, Copyright, Grants

Session Publication Copyright Patent Grants
  Journal Conference and Book Chapter Book      
2022-23 15 48 03 09 07 Rs 51.24 lakhs (Submitted)
2021-22 19 06 09 Rs.12.09 lakhs
2020-21 30 19 03 Rs.  2.8 lakhs
2019-20 23 15 Nil Rs.3 lakhs

Faculty Publication Details (Journal)- 2022-23

Sr. No. Name of the Author(s) Title of the Paper Name of the Journal Publisher DOI Index
1.          Gurjeet Singh, Hongwei Wu Effect of Different Inlet/Outlet Port Configurations on the Thermal Management of Prismatic Li-Ion Batteries ASME Journal of Heat and Mass Transfer, ASME https://doi.org/10.1115/1.4055340 SCI  
2.         P. S. Barve Application of ANN modelling for optimisation of surface quality and kerf taper angle in abrasive water jet machining of AISI 1018 steel Advances in Materials and Processing Technologies (Journal) Taylor and Francis https://doi.org/10.1080/2374068X.2022.2096830  Scopus
3.         S. P. Ambade, Ravinder Kataria, C.K.Tembhurkar, Santosh Gupta Experimental and finite element analysis of temperature distribution in 409 M ferritic stainless steel by TIG, MIG and SMAW welding processes Advances in Materials and Processing Technologies     Taylor and Francis https://doi.org/10.1080/2374068X.2022.2100127     Scopus
4.         Prashant D. Kamble, Ketan Fulzele, Nikhil Shahare, Ritik Rane, Shilpa B. Sahare and YashikaGaidhani Automated Sanitizing Machine for Recording Thermal Detection and Hygiene Application IOP Conf. Series: Materials Science and Engineering     IOP doi:10.1088/1757-899X/1259/1/012037     Scopus
5.         Chetan Mahatme, Jayant Giri Error Minimization in Pre-surgical Model of Brain Tumor for 3-D Printing   Institute of Engineer C series Springer https://doi.org/10.1007/s40032-022-00894-w Scopus
6.         Mahatme C., Giri, J., Chadge, R., Bhagat, A. Comparative analysis of different lattice topologies for cellular structure optimization in additive manufacturing   Materials Today Elsevier https://doi.org/10.1016/j.matpr.2022.03.280 Scopus
7.         A.H. Pundkar, Chaudhari, S.S. Performance parameters enhancement with application of nanotechnology to MTR refrigeration system Materials Today Elsevier https://doi.org/10.1016/j.matpr.2022.09.087 Scopus
8.         Chaudhari, S.S., S.N. Aloni Optimization of green sand process for quality improvement in castings by using combination of Taguchi Techniques-GRA-PCA Materials Today Elsevier https://doi.org/10.1016/j.matpr.2022.04.322 Scopus
9. N. P. Mungle, N.,Waghmare, S. N., Shelare, Structural design and its analysis of two station notching tool for industrial die Materials Today: Proceedings Elsevier https://doi.org/10.1016/j.matpr.2022.06.360 Scopus
10. Jayant Giri, Hamad A. Al-Lohedan, Faruq Mohammad, Ahmed A. Soleiman, Rajkumar Chadge, Chetan Mahatme, Neeraj Sunheriya, Pallavi Giri, Dhananjay Mutyarapwar and Shreya Dhapke A Comparative Study on Predication of Appropriate Mechanical Ventilation Mode through Machine Learning Approach Bioengineering MDPI https://doi.org/10.3390/bioengineering10040418 SCI
11. Rajesh G. Bodkhe, Rakesh L. Shrivastava , Vinod Kumar Soni, Rajkumar B. Chadge A review of renewable hydrogen generation and proton exchange membrane fuel cell technology for sustainable energy development International Journal of Electrochemical Science Elsevier https://doi.org/10.1016/j.ijoes.2023.100108 SCI
12. Neeraj Sunheriya, Satish Kumar Dewangan, Sanjeev B. Thool Experimental and computational analysis of riser tubes of modified simple solar water heater with different twisted inserts International Journal on Interactive Design and Manufacturing (IJIDeM) Springer https://doi.org/10.1007/s12008-023-01233-8 ESCI, Scopus
13. SachinAmbade, Faraz Khan, Atharva Dahikar, Yash Bhonde, Sagar Shelare, Chetan Tembhurkar, DiweshMeshram Dissimilar welding of austenitic SS and ferritic SS in last decades Materials Today Proceedings Elsevier https://doi.org/10.1016/j.matpr.2023.04.533 SCOPUS
14 Neeraj Sunheriya; Sachin G Mahakalkar; Rajkumar B. Chadge; Pratik Lande; Jayant P Giri; AshuoshBagde Experimental analysis of twin blade contra-rotating wind turbine IEEE Xplore IEEE doi: 10.1109/ICETEMS56252.2022.10093565 SCOPUS
15 Chetan Mahatme; Jayant Giri; Rajkumar Chadge; Punit Fulzele Brain Tumor Segmentation and Model Optimization for 3-D Printing IEEE Xplore IEEE doi: 10.1109/ICETEMS56252.2022.10093365 SCOPUS

Faculty Publication Details (Journal)- 2021-22

Sr. No. Name of the Author(s) Title of the Paper Name of the Journal Publisher DOI Index
1. S. P. Ambade, A.P. Patil, C.K. Tembhurkar, DiweshMeshram Shielded metal arc welding of AISI 409M ferritic stainless steel: study on mechanical, intergranular corrosion properties and microstructure analysis World Journal of Engineering Emerald https://doi.org/10.1108/WJE-03-2021-0146     ESCI, Scopus
2. Dr. S. P. Ambade, A.P. Patil, C.K. Tembhurkar, DiweshMeshram Effect of filler and autogenous welding on microstructure, mechanical and corrosion properties of low nickel Cr-Mn ASS Advances in Materials and Processing Technologies Taylor and Francis https://doi.org/10.1080/2374068X.2021.1970989     ESCI, Scopus
3. C.K. Tembhurkar, S. P. Ambade, Ravinder kataria Spot welding analysis of dissimilar joint by finite element analysis Materials Today Proceeding Elsevier https://doi.org/10.1016/j.matpr.2021.09.410   Scopus
4.          Santosh Gupta, .C. Tathod, A.P.Patil, S. P. Ambade Effect of gas tungsten arc welding on the microstructural, mechanical and corrosion properties of Ti-stabilized 439 ferritic stainless steel Materials Today Proceeding Elsevier https://doi.org/10.1016/j.matpr.2021.09.116   Scopus
5.          Bhojraj Kale, V. R. Khawale, Performance and exhaust emission characteristics investigation of compression ignition engine fuelled with microalgae biodiesel and its diesel blends Environmental Science and Pollution Research   Springer https://doi.org/10.1007/s11356-021-17587-z     Scopus
6.           R. G. Bodkhe, DR. R.L. Shrivastava Design, development and Performance Analysis of Polymer Electrolyte Membrane Fuel Cell Design Engineering (Toronto) Rogers Media Publishing Ltd. https://www.thedesignengineering.com/index.php/DE/article/view/6178   Scopus
7.          R. G. Bodkhe, R.L. Shrivastava A Review on Design, Development & Performance Analysis of Solar Powered Hydrogen Fuel Cell System Design Engineering (Toronto) Rogers Media Publishing Ltd.  https://www.thedesignengineering.com/index.php/DE/article/view/6986     Scopus
8.          Y.Y. Nandurkar, R.L. Shrivastava Improvement in Energy Efficiency of CPV Module by Way of various Active and Passive Cooling Techniques Journal of The Institution of Engineers (India): Series C (2021) Springer https://doi.org/10.1007/s40032-021-00765-w     Scopus
9.          A. S. Bonde Design of Multipurpose Mechanical machine Materials Today Proceeding Elsevier https://doi.org/10.1016/j.matpr.2021.06.165   Scopus
10.       Prof. G.H. Waghmare Design and Development of Modular Arm Cast Using Additive Manufacturing IOP Conference Series: Materials Science and Engineering IOP https://doi.org/10.1088/1757-899X/1170/1/012014     Scopus
11.       Prof. C. A. Mahatme, Dr. J.P. Giri Comparative analysis of different lattice topologies for cellular structure optimization in additive manufacturing Materials Today Proceeding Elsevier https://doi.org/10.1016/j.matpr.2022.03.280   Scopus
12.       Dr. P. D. Kamble Performance Evaluation of CNC Turning Process for Tool Tip Temperature and Tool Wear by Taguchi Method Materials Today Proceeding Elsevier https://doi.org/10.1016/j.matpr.2022.04.147      Scopus
13.       Dr.R.B. Chadge, Dr. J.P. Giri Experimental investigation of different electrical configurations and topologies for Photovoltaic system Materials Today Proceeding Elsevier https://doi.org/10.1016/j.matpr.2022.03.097   Scopus
14.       Prasad A.Hatwalne Productivity Improvement of Rear Axle Carrier Assembly using Motionand Time Study– A Case Study forTractor Manufacturing Company Indian Journal of Natural Sciences Tamil Nadu Scientific Research Organisation   WOS
15.       N Sunheriya, R Sambare, T Sathe, N Kanojiya,SMahakalkar Experimental Investigation on Enhancement of Convective Heat Transfer Coefficient in Parabolic Collector Using Nanofluids Applied Solar Energy Springer https://doi.org/10.3103/S0003701X21020110 Scopus
16.       N Sunheriya,  SKDewangan, T RaviKiran Review of component wise performance enhancement techniques for simple solar water heater Energy Sources, Part A: Recovery, Utilization, and Environmental Effects Taylor and francis https://doi.org/10.1080/15567036.2021.1954728 SCI
17.       Ambade, S., DB Meshram, YM Puri, V Gohil Novel curved trajectory machining using VOEDM process–experimental study and statistical optimisation thereof Advances in Materials and Processing Technologies Taylor and Francis https://doi.org/10.1080/2374068X.2020.1793271 WOS
18.       Ambade, S., Meshram, D.B., Gohil, V., Puri, Y.M. Implementation of multi-objective Jaya optimization for performance improvement in machining curve hole in P20 mold steel by sinking EDM World Journal of Engineering Emerald https://doi.org/10.1108/WJE-11-2020-0568 Scopus
19.       Chaudhari, S.S. Optimization of green sand process for quality improvement in castings by using combination of Taguchi Techniques-GRA-PCA Materials Today: Proceedings Elsevier https://doi.org/10.1016/j.matpr.2022.04.322 Scopus

Faculty Publication Details (Journal)- 2020-21

Sr. No. Name of Authors Title of the Paper Title of Journal Publisher   DOI Index
1                       Chetan K. Tembhurkar, Ravinder Katariya, S.P. Ambade, Jagesvar Verma, Anand Sharma, Saurabh Sarkar Effect of filler and autogenous welding on dissimilar welded 316L austenitic and 430 ferritic stainless steels Journal of material engineering and performance, Springer SPRINGER DOI 10.1007/s11665-020-05395-4 SCI
2                       Satish Kumar Dewangan, Neeraj Sunheriya& T RaviKiran Review of component wise performance enhancement techniques for simple solar water heater Energy Sources, Part A: Recovery, Utilization, and Environmental Effects Taylor and Francis https://doi.org/10.1080/15567036.2021.1954728 SCI
3                       A.S. BondeMandavgade, Ghate, Wankhede, Nandi Design and analysis of walker with sit to stand assistance Materials Today: Proceedings ELSEVIER https://doi.org/10.1016/j.matpr.2021.05.009 SCOPUS
4                       Chetan Mahatme, Jayant Giri, Rajkumar Chadge, Satish Sonwane Compression deformation analysis of cellular lattice structure for structural optimization in additive manufacturing Materials Today: Proceedings ELSEVIER https://doi.org/10.1016/j.matpr.2021.04.463 SCOPUS
5                       D.I. Sangotra, M.Mendhe,DrS.D.Kshirsagar and Prof Ram Tamboli, Mathematical Modelling of Hoverboard JOURNAL OF PHYSICS CONFERENCE SERIES IOP Publishing doi:10.1088/1742-6596/1913/1/012142 SCOPUS
6                       J.P. Giri, S.R. JACHAK Optimization of FDM Process Parameters for Dual Extruder 3D Printer using Artificial Neural Network Materials Today: Proceedings, ELSEVIER https://doi.org/10.1016/j.matpr.2021.01.899 SCOPUS
7                       M.K. Mendhe, Shrikant Jachak, Prashant Kamble, Dilip Sangotra and Anupam Kakde Space Optimized Design of a Flywheel for Punching Press Journal of Physics Conference Series IOP Publishing doi:10.1088/1742-6596/1913/1/012142 SCOPUS
8                       P.D. Kamble, Atul Waghmare, Ramesh Askhedkar, Shilpa Sahare and Brij Singh Application of Hybrid Taguchi- Grey Relational Analysis ( HTGRA) Multi-Optimization Technique to Minimize Surface Roughness and Tool Wear in Turning AISI4340 Steel Journal of Physics Conference Series IOP Publishing doi:10.1088/1742-6596/1913/1/012142 SCOPUS
9                       P.S. Barve, M.K.Mendhe Maintenance optimization in Goliath Crane in supply current cable trolley system. Journal of Physics Conference Series IOP Publishing doi:10.1088/1742-6596/1913/1/012142 SCOPUS
10                    R.V. Adkane, Krushna Chaitanya Patnaik1, Seema H. Thakare2, Prashil P. Jumade3, Shilpa Gaidhane4, A Survey Study on Etiological factors of Mutrashmari (Urolithiasis) in Perspective of Ayurved and Contemporary Era International Journal of Current Research and Review IJCRR DOI: http://dx.doi.org/10.31782/IJCRR.2020.SP83   SCOPUS
11                    S.B. Sahare, Sachin Untawale, Prashant Kamble, Sharad Chaudhari and TrupatiBalwir Experimental Investigation of Milling Process under Optimum Lubricant Use by Optimization Technique Journal of Physics Conference Series IOP Publishing doi:10.1088/1742-6596/1913/1/012142   SCOPUS
12                    S.P. Ambade, Anand Sharma, Awanikumar P. Patil, Yogesh M. Puri Effect of welding processes and heat input on corrosion behaviour of Ferritic stainless steel 409M Materials Today: Proceedings ELSEVIER https://doi.org/10.1016/j.matpr.2020.06.251   SCOPUS
13                    D.B. Meshram, Yogesh M Puri, Vikas Gohil, S.P. Ambade Novel curved trajectory machining using VOEDM process – experimental study and statistical optimisation thereof Advances in Materials and Processing Technologies Taylor and Francis https://doi.org/10.1080/2374068X.2020.1793271   SCOPUS
14                    S.R.JACHAK, J.P. GIRI, G.K. AWARI,  A.S. BONDE Surface Finish Generated In Turning Of Medium Carbon Steel Parts Using Conventional And Adhesive Bonded Tools Materials Today: Proceedings, ELSEVIER https://doi.org/10.1016/j.matpr.2021.01.127     SCOPUS
15                    Aloni, S.N., Chaudhari, S.S., Shrivastava, R.L. Optimisation and predictive modelling of green sand casting process to minimise persisting defects in GI components International Journal of Productivity and Quality Management Inderscience 10.1504/IJPQM.2020.108379   SCOPUS
16                    Vivek Korde, Jayant Giri, NaredraGiradkar Formulation of Empirical correlation for internal forced convection Materials Today: Proceedings ELSEVIER https://doi.org/10.1016/j.matpr.2021.04.569   SCOPUS SCOPUS
17                    C.A. Mahatme, Mangesh Deshmukh,Ceinsys Tech Ltd, Nagpur, India Generative Design: A New Intelligent Design & Manufacturing Approach Chemik International Chemik International     WEB OF SCIENCE
18                    P.D. Kamble, Bijal Shah Application of Autodesk Architecture, Engineering and Construction (AEC) Workflow in Architecture Industry Chemik International Chemik International         WEB OF SCIENCE
19                    R.B. Chadge, Mangesh Deshmukh,Ceinsys Tech Ltd, Nagpur, India Design Automation using the Power of Inventor iLogic Chemik International Chemik International       WEB OF SCIENCE
20                    Adkane, R. ,Ehtesham, M.A., Lakhkar, B. Lactate dehydrogenase as predictor for severity in sickle cell disease International Journal of Current Research and Review, Radiance Research Academy DOI: http://dx.doi.org/10.31782/IJCRR.2020.SP84 SCOPUS
21                    Choudhari, S.S. ,Kuchewar, V., Desai, P., Sawarkar, G., Umate, R., Effect of introduction of ‘research orientation module’ in ayurveda undergraduates International Journal of Current Research and Review, Radiance Research Academy DOI: http://dx.doi.org/10.31782/IJCRR.2020.SP91 SCOPUS
22                    Choudhari, S.S. ,Parwe, S., Kuchewar, V., Nisargandha, M., Patil, M., Comparative study of manjishtadi oil and ashwagandha oil matrabasti on vishwachi (Cervical radiculopathy) International Journal of Current Research and Review, Radiance Research Academy DOI: http://dx.doi.org/10.31782/IJCRR.2020.SP85 SCOPUS
23                    Chaudhari, S.S. ,Ranjan, A., Jain, S., A study of clinical profile in patients with vestibular and non-vestibular vertigo International Journal of Current Research and Review, Radiance Research Academy DOI: http://dx.doi.org/10.31782/IJCRR.2020.SP75 SCOPUS
24                    Chaudhari, S.S. ,Jadhav, S., Dudhekar, U., Saoji, K. Outcome analysis of high tibial osteotomy in osteoarthritis of knee: A study protocol International Journal of Current Research and Review, Radiance Research Academy DOI: http://dx.doi.org/10.31782/IJCRR.2020.SP60 SCOPUS
25                    Purushottam S Barve, Abhishek Madankar, Parikshit Dumbhare, Yogesh Vasantrao Deshpande, Atul B Andhare, Estimation and control of surface quality and traverse speed in abrasive water jet machining of AISI 1030 steel using different work-piece thicknesses by RSM Australian Journal of Mechanical Engineering Taylor and Francis https://doi.org/10.1080/14484846.2021.1876600 SCOPUS
26                    Narkhede, A.R., Deshpande, A., Desai, P., Deshpande, M., Choudhary, S., The study protocol of comparative study on efficacy of marmachikitsa, agnikarma and physiotherapy in avabahuka (Frozen shoulder) International Journal of Current Research and Review, Radiance Research Academy ·         DOI:10.31782/ijcrr.2020.sp95   SCOPUS
27                    Prof. Dipti Kashyap, Shrinivas Andhare4 Yaseer Phyrose1*, , Abhijeet Bulbule3 Automation of sundry board machine used in Paper-Cardboard mills Materials Today: Proceedings ELSEVIER https://doi.org/10.1016/j.matpr.2021.01.025 SCOPUS
28                    Vishal Fegade, A,V. Kale, RL Srivastava Remanufacturing feasibility of bike suspension by hybrid TOPSIS-Taguchi optimization Journal of Advanced Research in Fluid Mechanics and Thermal Sciencesthis SemarakIlmu Publishing https://www.akademiabaru.com/submit/index.php/arfmts/article/view/2976 SCOPUS
29                    J P Giri, Anghachiwande, chetanMahatme Effect of process parameters on mechanical properties of 3d printed samples using FDM process Materials Today: Proceedings, ELSEVIER https://doi.org/10.1016/j.matpr.2021.04.283 SCOPUS
30                    Jayant Giri, Neeraj Kshirsagar Design and simulation of AI-based low-cost mechanical ventilator: An approach Materials Today: Proceedings, ELSEVIER https://doi.org/10.1016%2Fj.matpr.2021.04.369 SCOPUS

Faculty Publication Details (Journal)- 2019-20

Sr. NO. Name of Co-Authors Title of the paper Title of Journal Publisher DOI Index
1. Chaudhari, S.S., Chakule, R.R., Talmale, P.S. Experimental study of heat transfer characteristics of Al2O3 and CuO nanofluids for machining application Materials Today: Proceedings Elsevier   https://doi.org/10.1016/j.matpr.2019.06.499 Scopus
2. Chakule, R.R., Chaudhari, S.S., Talmale, P.S Optimization of Nanofluid Minimum Quantity Lubrication (NanoMQL) Technique for Grinding Performance Using Jaya Algorithm Advances in Intelligent Systems and Computing Springer https://doi.org/10.1007/978-981-13-8196-6_20   Scopus
3. Chakule, R.R., Chaudhari, S.S., Talmale, P.S Performance Improvement of Nanofluid Minimum Quality Lubrication (Nanofluid MQL) Technique in Surface Grinding by Optimization Using Jaya Algorithm Advances in Applied Mechanical Engineering, Springer 10.1007/978-981-15-1201-8_86   Scopus
4. Vinod kumar, S.P. Untawale,Kshitijshrivastava,  R.L. Shrivastava Performance Analysis and Optimization of Fresnel Lens Concentrated Solar Water Heater Journal of Solar Energy Engineering ASME https://doi.org/10.1115/1.4041846   Scopus
5. R.L. Shrivastava, Manisha Lande, Dinesh Seth Application of graph-theoretic approach for the evaluation of lean-six-sigma (LSS) critical-success-factors (CSFs) facilitating quality-audits in Indian small & medium enterprises (SMEs) International Journal of Quality & Reliability Management Emerald DOI: 10.1108/IJQRM-05-2019-0166     Scopus
6. V.R. Khawale, B.N. kale

Analysis of direct, indirect and hybrid solar dryer

 		 International Journal of Mechanical and Production Engineering Research and Development, 2020, 10(3), pp. 775–792, Transstellar Journal Publications and Research Consultancy Private Limited   Scopus
7. R.B. Chadge, R.L. Shrivastava, J.P. Giri, T.N. Desai Role Of Industry 4.0 In Performance Improvement of Furniture Cluster New Paradigm of Industry 4.0 Springer DOI:10.1007/978-3-030-25778-1_2 Web of Science
8.
 Rajesh G. Bodkhe,RakeshL.Shrivastava,Vinod Kumar Soni,Lovely Kumari
 State of the art solar-powered fuel cell system Journal of Advanced Research in Dynamical and Control Systems Institute of Advanced Scientific Research https://www.jardcs.org/abstract.php?id=5583 Scopus
9. Chadge, R., Numerical analysis of flat plate solar collector Journal of Advanced Research in Dynamical and Control Systems     Scopus
10. Edlabadkar, A.P., Chaudhari, S.S., Telrandhe, S. The finite element analysis of the human rib cage Journal of Advanced Research in Dynamical and Control Systems     Scopus
11. Kamble, P.D., Waghmare, A.C., Askhedkar, R.D., Sahare, S.B. Taguchi approach to optimize surface roughness for turning AISI 4340 steel Journal of Advanced Research in Dynamical and Control Systems     Scopus
12. POOJA P Thakre, Vinod N Ade, DR SHILPA GAIDHANE, RAKESH ADAKANE Study the efficacy of duhsparshadileha and kantakariavaleha in the management of vatajakasa International Journal of Pharmaceutical Research   https://doi.org/10.53730/ijhs.v6nS2.5051 Scopus
13. Design and fabrication of water surface garbage cleaner machine using non-conventional energy Design and fabrication of water surface garbage cleaner machine using non-conventional energy Journal of Advanced Research in Dynamical and Control Systems   https://www.researchgate.net/publication/343602644_Design_and_fabrication_of_water_surface_garbage_cleaner_machine_using_non_conventional_energy Scopus
14. Adakane, R., Fulzale, P., Lavhale, A., ...Adakane, R., Bajaj, P. Review paper on dental crown holder Journal of Advanced Research in Dynamical and Control Systems   https://www.jardcs.org/abstract.php?id=5589 Scopus
15. Agrawal, A., Keche, H.A., Adakane, R. A study of accessory renal arteries and its clinical implications International Journal of Pharmaceutical Research     Scopus
16. Krishnendu, S., Chandak, A.V., Singam, A., Narkhede, A.R. Comparative evaluation of the effect of clonidine and dexmedetomidine as adjuncts to lignocaine in intravenous regional anaesthesia in forearm and hand surgeries. International Journal of Pharmaceutical Research     Scopus
17. Wadekar, A., Wanjari, A., Kumar, S., Narkhede, A.R. Visceral adiposity index in pre-hypertensives International Journal of Pharmaceutical Research   https://doi.org/10.31838/ijpr/2019.11.03.156 Scopus
18. Fulzele, P., Kumbhare, A., Mangde, A., ...Narkhede, A., Choudhary, S. Smart IoT based portable vaccine cold box for healthcare use Journal of Advanced Research in Dynamical and Control Systems   https://www.jardcs.org/abstract.php?id=4502 Scopus
19. Fulzele, P., Bodkhe, H., Patil, R., ...Narkhede, A., Gaidhane, A., Quazi, Z. Enhancing magnification to recognize cell structure in foldscope Journal of Advanced Research in Dynamical and Control Systems   https://www.jardcs.org/abstract.php?id=4505 Scopus
20. Narkhede, A., Adakane, R., Umate, R. Design and fabrication of water surface garbage cleaner machine using non-conventional energy Journal of Advanced Research in Dynamical and Control Systems   https://www.researchgate.net/publication/343602644_Design_and_fabrication_of_water_surface_garbage_cleaner_machine_using_non_conventional_energy Scopus
21. Sachin G Mahakalkar ,RiteshSambare , Neeraj Sunheriya Effect of Environmental Conditions on Performance of Corrugated Sheet Boxes Manufacturing Process International Journal of Recent Technology and Engineering   DOI: 10.35940/ijrte.B1122.0782S719 Scopus
22. V. Reddy, Chaudhari, S.S. Fluid balance in critically ill children admitted in picu International Journal of Pharmaceutical Research Advanced Scientific Research https://doi.org/10.31838/ijpr/2019.11.03.160 Scopus
23. Bhuyan B, Chandak A.V, Chaudhari, S.S. A study on analgesic efficacy of intrathecal bupivacaine and fentanyl with intrathecal midazolam for lower limb surgeries International Journal of Pharmaceutical Research Advanced Scientific Research https://www.cochranelibrary.com/central/doi/10.1002/central/CN-02138245/full Scopus

Faculty Publication Details (Conference and Book Chapter)- 2019-2023

Sr. No. Name of the Teacher Title of the Book published Title of the Chapter published Year
1 Dr. J.P. Giri Proceedings of 2nd International Conference on Communication, Computing and Networking. Lecture Notes in Networks and Systems, vol 46. Springer, Singapore The Effect of Various Parameters on the Nozzle Diameter and 3D Printed Product in Fused Deposition Modelling: An Approach 2nd International Conference on Communication, Computing and Networking, 2019
2 Dr. S.S. Chaudhari Proceeding - 1st International Conference on Innovative Trends and Advances in Engineering and Technology, ICITAET 2019 Review on design and heat transfer analysis of solid and perforated fins for the enhancement of thermal performance of heat sinks ICITAET 2019
3 Prof. Neeraj Sunheriya Advances in Applied Mechanical Engineering: Select Proceedings of ICAMER 2019 (Lecture Notes in Mechanical Engineering) Design, Development and Analysis of Intake Manifold of Single-Cylinder Diesel Engine   ICAMER 2019
4 Dr.R.BChadge New Paradigm of Industry 4.0, Springer Role of Industry 4.0 in Performance Improvement of Furniture Cluster 2020
5 Dr. S.P. Ambade Advances in Materials Processing, Springer Transient Analysis of GTA-Welded Austenitic and Ferritic Stainless Steel 23-June 2020
6 Dr. S. P. Ambade Optimization in Industrial and Manufacturing Systems and Applications, Springer A Critical Review on Dissimilar Joining of ASS and FSS  CIMS-2020
7 Dr. S.R. Jachak Smart Technologies for Energy, Environment and Sustainable Development, Vol 1 Performance Evaluation of Adhesive Bonded Tools Using Design of Experiments ICSTEESD 2020
8 Prof. Y.Y. Nandurkar Smart Technologies for Energy, Environment and Sustainable CDevelopment, Vol 2 Efficiency Improvement of Concentrated Photovoltaic (CPV) System by Way of Various Active and Passive Cooling Techniques—A Review ICSTEESD 2020
9 Dr. S.S. Chaudhari Lecture Notes in Mechanical Engineering, Springer Performance Improvement of Nanofluid Minimum Quantity Lubrication (Nanofluid MQL) Technique in Surface Grinding by Optimization Using Jaya Algorithm 2020
10 Dr. S.S. Chaudhari Advances in Intelligent Systems and Computing Optimization of Nanofluid Minimum Quantity Lubrication (NanoMQL) Technique for Grinding Performance Using Jaya Algorithm 2020
11 Prof. D.Y. Shahare Proceedings of International Conference in Mechanical and Energy Technology Investigating Heat Treatment Process for Shear Failed Traction Pinion Supported Using FEA 2020
12 Prof. N.J. GIRADKAR Technology Innovation in Mechanical Engineering Formulation of Empirical Correlation for Heat Transfer Coefficient, for Gases, in Terms of Fluid Properties, Tube Diameter and Mass Velocity; for Forced Convection Through Tubes. TIME 2021
13 Prof. V M KORDE Advances in Mechanical Engineering and Technology Design and Performance of Plate-Fin Heat Exchanger: A Brief Review ICAPIE - 2021
14 Prof. Dipti N. Kashyap Recent Advances in Manufacturing Modelling and Optimization Electrically Operated Hygiene Bin to Simplify the Initial Stage of Diaper Composting RAM 2021
15 Dr. J.P. Giri Transformation in Healthcare with Emerging Technologies Machine Learning for Designing a Mechanical Ventilator: An Approach -
16 Dr. J.P. Giri Bentham Science Book Series (Scopus Indexed) Radial Basis Function Neural Network for prediction of Mechanical Properties for Fused Deposition Method AIE2021, Delhi Technical Campus, Greater Noida, India
17 Chadge, R.B., Sunheriya, N., Mahatme, C., Giri, J.P. Lecture Notes in Mechanical Engineering, Springer

Experimental and Numerical Investigation of Flat Plate Solar Water Heater

 		 2021
18 Dr. S.P. Ambade 1st Edition Evolutionary Optimization of Material Removal Processes Application of ANN and Taguchi technique for material removal rate by Abrasive Jet Machining with special abrasive materials 2022
19 Dr. Sandip S. Khedkar 1st Edition Recent Advances in Materials, Manufacturing and Machine Learning Design And Development of Bull Operated Mulching Machine Suitable for Small Scale Farmers in India (https://doi.org/10.1201/9781003358596-80) RAMMML-2022, YCCE
20 Dr. S. T. Bagde 1st Edition Recent Advances in Materials, Manufacturing and Machine Learning Development of Low Cost Deburring Setup with Feedback Capability (https://doi.org/10.1201/9781003370628-32) RAMMML-2022, YCCE
21 Dr. V. R. Khawale 1st Edition Recent Advances in Materials, Manufacturing and Machine Learning Study and analysis of various characteristics of innovative Solar Crop Dryer (https://doi.org/10.1201/9781003370628-3) RAMMML-2022, YCCE
22 Narendra J Giradkar 1st Edition Recent Advances in Materials, Manufacturing and Machine Learning FLUID-PARTICLE HEAT TRANSFER IN FLUIDIZED AND FIXED BEDS (https://doi.org/10.1201/9781003370628-63) RAMMML-2022, YCCE
23 Dr. S. S Chaudhari 1st Edition Recent Advances in Materials, Manufacturing and Machine Learning Optimum Sprue design and analysis using InspireCast for performance Improvement in Casting Process (https://doi.org/10.1201/9781003370628-64) RAMMML-2022, YCCE
24 Prof. Narendra J Giradkar 1st Edition Recent Advances in Materials, Manufacturing and Machine Learning IRRELEVANCE OF DIMENSIONAL APPROACH AS APPLIED TO FORMULATE EQUATIONS IN CONVECTIVE HEAT TRANSFER (https://doi.org/10.1201/9781003370628-48) RAMMML-2022, YCCE
25 Prof. Ashvin amale 1st Edition Recent Advances in Materials, Manufacturing and Machine Learning Experimental and Numerical Analysis of Jet Impingement Heating on Cylindrical Body (https://doi.org/10.1201/9781003358596-81) RAMMML-2022, YCCE
26 Dr. Jayant Giri 1st Edition Recent Advances in Materials, Manufacturing and Machine Learning A Comparative Study of a Plane NACA2412 Airfoil with a NACA2412 Airfoil attached with Gurney Flap using CFD (https://doi.org/10.1201/9781003370628-74) RAMMML-2022, YCCE
27 Dr. Jayant Giri 1st Edition Recent Advances in Materials, Manufacturing and Machine Learning Public acceptance of drones : An approach (https://doi.org/10.1201/9781003358596-55) RAMMML-2022, YCCE
28 Dr. Girish M. Dhote 1st Edition Recent Advances in Materials, Manufacturing and Machine Learning Optimum Solution of Goal Programming Problem by Modified Charnes Penalty Method RAMMML-2022, YCCE
29 Prof. Ajay Bonde 1st Edition Recent Advances in Materials, Manufacturing and Machine Learning Optimization of Process Parameters of CNC Milling: An Approach RAMMML-2022, YCCE
30 Prof. Ajay Bonde 1st Edition Recent Advances in Materials, Manufacturing and Machine Learning Application of Value Stream Mapping for effective implementation of the Lean system in the small scale industry RAMMML-2022, YCCE
31 Prof. V.M. Korde 1st Edition Recent Advances in Materials, Manufacturing and Machine Learning FLUIDIZED BED DRYER FOR AGRICULTURAL PRODUCTS: AN APPROCH (https://doi.org/10.1201/9781003358596-59) RAMMML-2022, YCCE
32 Prof. N.R. Sunheriya 1st Edition Recent Advances in Materials, Manufacturing and Machine Learning CFD analysis of vortex tube using multiple nozzles (https://doi.org/10.1201/9781003358596-16) RAMMML-2022, YCCE
33 Dr. Prashant D. Kamble 1st Edition Recent Advances in Materials, Manufacturing and Machine Learning Prediction of Response Parameter for Turning AISI 4340 steel using Hybrid Taguchi-ANN Method (HTAM) (https://doi.org/10.1201/9781003358596-18) RAMMML-2022, YCCE
34 Dr. Arun P. Kedar 1st Edition Recent Advances in Materials, Manufacturing and Machine Learning AHP Approach for Measuring Service Quality of Passenger Car (https://doi.org/10.1201/9781003370628-38) RAMMML-2022, YCCE
35 Dr. S.P. Ambade 1st Edition Recent Advances in Materials, Manufacturing and Machine Learning Development and Analysis of Paperless SOPs and Travelcard for the Manufacturing Industry (https://doi.org/10.1201/9781003370628-60) RAMMML-2022, YCCE
36 Dr. Arun Kedar, Dr. Rajkumar Chadge 1st Edition Recent Advances in Materials, Manufacturing and Machine Learning Case Study on Quality Circle Implementation at a Large Scale Manufacturing Unit (https://doi.org/10.1201/9781003370628-4) RAMMML-2022, YCCE
37 Dr. S.P. Ambade 1st Edition Recent Advances in Materials, Manufacturing and Machine Learning Thyristor controlled LC (TCLC) Compensator for Current Harmonic Reduction (https://doi.org/10.1201/9781003370628-67) RAMMML-2022, YCCE
38 Dr. Jayant Giri, Rajkumar Chadge 1st Edition Recent Advances in Materials, Manufacturing and Machine Learning Workflow of Conversion of CT Scan Dicom Image of Reconstructed Humerus Fracture to 3D Printable Model for Preoperative  Usage with the help of Affordable Additive Manufacturing Process (https://doi.org/10.1201/9781003370628-25) RAMMML-2022, YCCE
39 Dr.R.BChadge 1st Edition Recent Advances in Materials, Manufacturing and Machine Learning Application of Supply Chain Management in Iron And Steel Industries (https://doi.org/10.1201/9781003370628-16) RAMMML-2022, YCCE
40 Prof. G. H. Waghmare 1st Edition Recent Advances in Materials, Manufacturing and Machine Learning Challenges and Recent Advances in Automated Plant Disease Recognition and Classification using Deep Learning and Machine Learning (https://doi.org/10.1201/9781003358596-56) RAMMML-2022, YCCE
41 Dr. Jayant Giri, Rajkumar Chadge 1st Edition Recent Advances in Materials, Manufacturing and Machine Learning Application of Additive Manufacturing in Orbital-Bone Fracture Reconstruction Surgery (https://doi.org/10.1201/9781003358596-15) RAMMML-2022, YCCE
42 Prof. Vivek M. Korde Advances in Manufacturing Technology and Management, Lecture Notes in Mechanical Engineering book series (LNME) Design and Optimization of an Evaporative Condenser: A Detailed Review   Nov. 2022
43 Prof. P.N. Shende Advances in Manufacturing Engineering Implementation of ISO 9001 in the Manufacturing Industry, a Literature Review. ICFAMMT 2022
44 Prof. Vivek M. Korde Lecture Notes in Mechanical Engineering, Springer Performance of an Evaporative Condenser: A Review 2022
45 Dr. S.S. Chaudhari AIP Conference Proceeding Comparative Review On Conventional And Recently Developed Perforated Fins For Heat Transfer Enhancement   2022
46 Dr. S.R. Jachak Smart Technologies for Energy, Environment and Sustainable Development, Springer Performance Evaluation of Adhesive Bonded Tools Using Design of Experiments   2022
47 Prof. P.A.Hatwalne Recent Advances in Manufacturing Processes and Systems, Springer Evaluating Torsional Properties of FDM Components for Various Layer Heights 2022
48 Prof. G.H. Waghmare Advances in Sustainability Science and Technology book series (ASST), Springer Design and Development of Universal Runner Cutting Machine 2022

Faculty Publication Details (Book)- 2019-2023

Sr. No. Name of Authors Title of Book Publisher Year of Publication ISBN
      1 Dr.ShilpaSahare, Dr.SachinUntawale, Dr.PrashantKamble Investigation of milling process parameters under optimum lubricant use by Taguchi approach Prominent Publication, Nagpur     10/10/2021   978-93-91786-22-9
  2 Dr. Arun Kedar and Dr. Yogesh V. Deshpande, Line Balancing of Pain Line in Toy Manufacturing Industry Innovative Scientific Publication, Nagpur   2022   978-81-949989-5-2
      3 Dr. Sunil Prayagi Ketan Deshmukh Design and Analysis of CNC Bending Machine and manufacturing using3D Printing Technology for Refractory Anchor Innovative Scientific Publication, Nagpur     2022   978-81-949989-5-3

Copyright – 2022-23

Sr. No. Subject PPTs Name of the Author Aplication Status Diary No.
1 Orthographic Projection PPT Sujata Kimmatkar Registered 4683/2022-CO/L
2 Quantitative Techniques -UnitI PPT P.S.Barve Pending for Hearing 19721/2021-CO/L
3 Industrial Engineering and productivity PPT Manish Dakhole Re-scruitiny 15775/2022-CO/L
4 Lab Manual Fluid Power Lab Lab Manual Prasad Hathwalne Re-scruitiny 12392/2022-CO/L
5 Methods of Broken Tap Removal PPT M.S.Tufail Re-scruitiny 6714/2022-CO/L
6 Reliability Engineering Notebook NOTEBOOK Ajinkya Edlabadkar Re-scruitiny 16062/2022-CO/L
7 Lathe Unit -II PPT Gopaldas Waghmare Re-scruitiny 24028/2022-CO/L
8 Analysis of Regenerative Braking System POSTER Yogesh Nandurkar Re-scruitiny 20232/2022-CO/L
9 Unit II-Geometric Transformation in CAD PPT Prasad Hathwalne scruitiny 26717/2022-CO/L

Copyright- 2021-22

Sr. No. Subject PPTs Name of the Author Aplication Status Diary No.
1 LIGHTING SYSTEM AND ENERGY MANAGEMENT PPT NILESH GEDAM Registered 19722/2021-CO/L
2 LPP Graphical Method PPT Vijay Thakre , Dr. Shrikant Jachak Registered 24514/2021-CO/L
3 Introduction to Simplex Algorithm PPT Vijay Thakre Registered 26001/2021-CO/L
4 Experiment- Study and Drawing of Microstructure of Plain carbon Steel Lab Manual Dipti N. Kashyap Registered 303/2022-CO/L
5 Columns and Struts PPT Rakesh Adakane Registered 5750/2022-CO/L
6 WIRE ROPE DRIVE PPT Alok Narkhede Registered 5978/2022-CO/L
7 Performance evaluation of manufacturing Industries by using 5S technique PPT NILESH GEDAM Registered 19083/2021-CO/L
8 High energy rate forming processes PPT P N Shende, D I Sangotra Registered 22856/2021-CO/L
9 Orthographic projection PPT Ashwin Amale Registered 4683/2022-CO/L

Copyright– 2020-21

Sr. No. Subject PPTs Name of the Author Aplication Status Diary No.
1 Unconventional Machining Process PPT Ashwin Amle REGISTERED 9828/2020-CO/L
2 Belt Drive PPT Alok Narkhede REGISTERED 12169/2020-CO/L
3 PPT ON CNC INTRODUCTION PPT R.V.Adakane REGISTERED 12168/2020-CO/L
4 Training, Development and Core competencies Subject Notes A.P.Edlabadkar REGISTERED 12156/2020-CO/L
5 SINGLE POINT CUTTING TOOL GEOMETRY AND TOOL SIGNATURE PPT M.S.TUFAIL REGISTERED 15208/2020-CO/L
6 Implementation of Process Capability in Injection Moulding Process in Plastic Industry POSTER Dipti N. Kashyap REGISTERED 19502/2020-CO/L
7 PROTOTYPING AND INVESTIGATION OF ABRASIVE JET POSTER MOHAN K MENDHE, SACHIN P. AMBADE REGISTERED 14220/2020-CO/L
8 EMPIRICAL CORRELATIONS FOR FORCED CONVECTION OVER FLAT PLATE UNDER UNIFORM WALL TEMPERATURE LAB MANUAL V.M.KORDE REGISTERED 15062/2020-CO/L
9 SYSTEM DESIGN IMPROVEMENT IN GOLIATH CRANE FOR SUPPLY CURRENT SYSTEM WRITEUP PURUSHOTTAM BARVE REGISTERED 15306/2020-CO/L
10 DESIGN OF MULTI-SPINDLE TAPPING MACHINE POSTER A.J.Bonde REGISTERED 14262/2020-CO/L
11 FLEXIBLE MANUFACTURING SYSTEM PPT M.M.Dakhore REGISTERED 15716/2020-CO/L
12 "Linear and Angular Measurements" PPT C.A.MAHATME Dr.J.P.Giri Dr.R.B.Chadge REGISTERED  15724/2020-CO/L
13 Introduction to Simple Mechanism PPT ShipaShahare Dr. P.D. Kamble REGISTERED 20390/2020-CO/L
14 Introduction to Finite Element Method PPT Dr. P.D. Kamble ShipaShahare REGISTERED 20057/2020-CO/L
15 PLANT LAYOUT IN PRODUCTION MANAGEMENT PPT NILESH GEDAM REGISTERED 15841/2020-CO/L
19 Introduction to Simplex Method PPT Dr. Shrikant jachak REGISTERED 277/2021-CO/L
16 HYDROGEN FUEL CELL SYSTEM PPT RAJESH G BODKHE REGISTERED 16544/2020-CO/L
17 Design and Fabrication of Hydraulic Trainer Kit Integrated with Simulation and Modeling of Automation Studio 5.0 Software POSTER YOGESH Y. NANDURKAR REGISTERED 18467/2020-CO/L
18 Solid Modeling-Introduction to Primitives PPT Anil Bamnote REGISTERED 1254/2021-CO/L

Copyright– 2019-20

Sr. No. Subject PPTs Name of the Author Aplication Status Diary No.
1 Case Study on Improvement in Productivity of Machining and Welding Shop POSTER YOGESH NANDURKAR SUNIL AKANT Registered 12233/2019-CO/L
2 ENGINEERING DRAWING PPT ASHVIN B AMALE Registered 10742/2019-CO/L
3 KINEMATICS OF MACHINERY GEARS PPT SHILPA SAHARE, Dr P.D.KAMBLE Registered 17670/2019-CO/L
4 MATERIAL SCIENCE AND METALLURG-UNIT I PPT D.N.KASHYAP, AJINKYA P.EDLABADKAR Registered 17671/2019-CO/L
5 OPERATION RESEARCH TECHNIQUES-I PPT P.S.BARVE Registered 389/2020-CO/L
6 PRODUCTION PLANNING AND CONTROL PPT NILESH GEDAM Registered 1058/2020-CO/L
7 CHAIN DRIVE-UNIT 2 PPT ALOK R. NARKHEDE Registered 4987/2020-CO/L
8 MECHANICS  OF MATERIAL PPT RAKESH V.ADAKANE Registered 4981/2020-CO/L
9 DESIGN AND FABRICATION OF COCONUT WATER EXTRACTION, DEHUSKING AND COCOPEAT FORMING MACHINE POSTER Dr. S.S.CHAUDHARI Registered 4991/2020-CO/L
10 ENHANCEMENT OF PRODUCTIVITY BY USING SINGLE MINUTE EXCHANGE OF DIE METHODOLOGY POSTER A.S.BONDE Registered 17666/2019-CO/L
11 MEASUREMENT OF CUTTING FORCES USING LATHE TOOL DYNAMOMETER Lab Manual S.R.JACHAK Registered 17683/2019-CO/L
12 HEAT TRANSFER FROM THE VERTICAL PLATE IN NATURAL CONVECTION Lab Manual V.M.KORDE Registered 17679/2019-CO/L
13 ROTARY TABLE FOR INDUCTION HARDENING MACHINE POSTER SANJEEV BANKAR Registered 12397/2019-CO/L
14 DEVELOPMENT OF SEWAGE MONITORING SYSTEM POSTER M.S.TUFAIL Registered 11986/2019-CO/L
15 REDUCTION OF BREAKDOWN FREQUENCY ON SHAPER MACHINE POSTER SUNIL AKANT Registered 12235/2019-CO/L

Patents: 2022-23

Sr. No. Name of Faculty Department/ Institution Title of the patent Application No. Filing Date Status
1 Dr.S.S.Khedkar ME/YCCE PORTABLE COMPOSTER 2021105388 44420 Granted on 10-11-2022
2 Prof. D. Y. Shahare, Prof. S. Nagpure ME/YCCE FAN CLEANING DEVICE AND METHOD THEREOF 2.02221E+11 44616 Granted on 07/02/2023,  Patent no. 420771
3 Dr. S. R. Jachak ME/YCCE AN ADHESIVE BONDED TURNING TOOL 2.02121E+11 44561 Granted on 30-12-2022, Patent No. 416226
4 Dr.S.S.Khedkar ME/YCCE AN APPARATUS FOR STREACHING HAMSTRING MUSCLES 2.02021E+11 44174 Granted on 29/12/2022, Patent no. 416036
5 Dr. S. P. Ambade ME/YCCE A SYSTEM FOR WATER-EFFICIENT COOLING CONTROL OF DESERT AIR COOLER 2.02121E+11 44561 Granted on 08-12-2022, Patent No. 413931
6 Dr.S.S.Khedkar ME/YCCE AN ENGINE OPERATED TRENCHING MACHINE 2.02121E+11 44561 Granted on 08-12-2022, Patent No. 413881
7 Dr.S.S.Khedkar ME/YCCE AN APPARATUS FOR DISPENSING HERBAL ENEMA MEDICINE 2.02121E+11 44561 Granted on 03-11-2022, Patent No. 410937

Patents 2021-22

Sr. No. Name of Faculty Department/ Institution Title of the patent Application No. Filing Date Status
1 Dr.S.S.Khedkar ME/YCCE AN APPARATUS FOR STRETCHING HAMSTRING MUSCLES 2021103076 44350 Granted on 29-07-2021
2 Dr.S.S.Khedkar ME/YCCE DEVICE FOR CUTTING UNWANTED PLANTS 2021105389 44420 Granted on 27-10-2021
3 Prof. D.Y.Shahare ME/YCCE SIX STRAND-SINGLE CORE INDUSTRIAL WIRE ROPE MAKING MACHINE 2021105391 44138 Granted on 08-12-2021
4 Dr.S.S.Khedkar ME/YCCE PORTABLE COMPOSTER 2.02021E+11 44138 Granted on 09/07/2021, Patent no.371186
5 Dr.S.S.Khedkar ME/YCCE SYSTEM AND APPARATUS FOR INJECTING GRANULAR FERTILIZER 2.02021E+11 44133 Granted on 06/07/2021, Patent no.371043
6 Prof. A.R.Narkhede ME/YCCE ASSEMBLY FOR CLEANING WATER BODY 2.02021E+11 44135 Granted on 10/07/2021, Patent no.371576
7 Dr.S.S.Khedkar ME/YCCE DEVICE FOR CUTTING UNWANTED PLANTS 2.02021E+11 44135 Granted on 23/09/2021, Patent no.377641
8 Dr.S.S.Chaudhari ME/YCCE THRESHING APPARATUS FOR THRESHING OF SOFT SEED CROPS 2.01821E+11 43133 Granted on 02/07/2021, patent no. 371061
9 Prof. R.V.Adakane ME/YCCE AN APPARATUS TO HOLD CROWN DURING CROWN MANIPULATIONS 202021053748 04-06-2021 Granted on 20-04-2022

Patents 2020-21

Sr. No. Name of Faculty Department/ Institution Title of the patent Application No. Filing Date Status
1 Dr.S.S.Khedkar ME/YCCE APPARATUS AND METHOD FOR PRODUCING READY-MIX COMPOST 2.01821E+11 43132 Granted on 26/02/2021, patent no. 359288
2 Prof. A.R. Narkhede ME/YCCE AN IOT BASED PORTABLE VACCINE COLD CARRIER 2021101427 44274 Granted on 28-04-2021
3 Dr.S.S.Khedkar ME/YCCE A DEVICE FOR DILATION OF THE CERVIX 2021101426 44274 Granted on 28-04-2021

Grants and Funding 2022-23

SN Dept. Title of Proposal Name of Coordinator/s Funding Agency Funding Scheme Amount (Lakhs) Date of Submission Status: Submitted/ Sanctioned
1 ME Advances in 3-D printing for Healthcare Industry C.A. Mahatme SERB SG/ 1.6L 22-07-2022 Rejected
2 ME “Bridging the gap between Theoretical and Physical World in Mechanical Engineering Domain” A. R.Narkhede SERB SG/ 1.6L 22-07-2022 Rejected
3 ME “Design and Analysis of Experiments: A Research Approach” S.R.Jachak SERB SG/ 1.6L 22-07-2022 Rejected
4 ME Optimisation of topology of DICOM (Ct Scan) for pre-surgical models using additive manufacturing Dr J.P.Giri RGSTC   5L 22-07-2022 Submitted
5 ME Six Sigma P.N.Shende SERB SG/ 1.6L 26-07-2022 Submitted
6 ME An Investigation on cladding of functionally graded high entropy additive manufacturing process using cold metal transfer(CMT) Dr.S.P.Ambade SERB EEQ 34.24 25-06-2022 Provisionally accepted for further processing
7 ME Renewable and non Reneable energy and its future N.D.Gedam P.S.Barve SERB SG/ 1.6L 11-10-2022 Rejected
8 ME Sustainable maching of super alloy P.S.Barve N.D.Gedam SERB SG/ 0.95L 11-10-2022 Rejected
9 ME Substractivemcahining on CNC and Lathe handson M.M.Dakhore SERB SG/ 1.6L 11-10-2022 Submitted
10 ME Bridging the gap between theortical and physical  world in mechanical Engineering A.B. Amale SERB SG/ 1.3l 12-12-2022 Submitted

Grants and Funding 2021-22

SN Dept. Title of Proposal Name of Coordinator/s Funding Agency Funding Scheme Amount (Lakhs) Date of Submission Status: Submitted/ Sanctioned
1 ME   Design and Development of Fuel Cell System for Backup Power Applications and its Performance Analysis Prof. R. G. BodkheDr. Sharad S. Chaudhari Dr. J. P. Giri Dr. R. B. Chadge Dr. R. L. Shrivastava DST   AHFC 71.2 29-07-2021 Under Review
2 YCCE (ME & IT)   FIST PG COLLEGE LEVEL 0 PROJECT[ TPN/70230] Dr U.H.Gawande Dr.U.P.Waghe, Dr.J.P.Giri, D.Y.Shahare DST FIST 68.58 05-09-2021 Rejected
3 ME Experimental Investigation of machining operation for minimum quantity lubrication. Dr.S.B.Sahare Dr.P.D.Kamble SERB POWER 19.82 21-09-2021 Rejected
4 ME Center for Innovation Learning & Creation (CIL&C) Dr.G.M.Dhote DST AMT 71.86 15-10-2021 REJECTED
5 ME A Symposium on optimisation technique and recent advances in Engineering( OTRAE) Dr P.D.Kamble SERB SERB Symposium 1.5 11-10-2021 REJECTED
6 ME Application of CAE in the field of sand casting process for technology development to ensure optimal performance and quality improvement of castings. Dr.S.S.Chaudhari Dr.S.N.Aloni DST TDP 27.42 30-12-2021 REJECTED
7 ME Performance Improvement of CNC turning process by ANN to optimise the output parameters. Dr P.D.Kamble Dr.S.P.Kamble,Prof.P.P.Shirpurkar DST TDP 67.55 31-12-2021 Rejected
8 ME An initiative to demonstrate innovative solar crop dryer in rural area of Maharashtra,India and to bring widespread public education and awareness leading to empowerment and capacity building. Dr.VijayKhawale Dr.J.P.Giri,D.Y.Shahare DST TDP 12.28 14-01-2022 REJECTED
9 ME Design and Development of Automatic ‘Dhara Device’ for various Musculo-Skeletal Disorders. D.Y.Shahare Dr.V.Kuchewar BIRAC BIG 2022 20.48 14-02-2022 REJECTED
10 ME   D.Y.Shahare MSME MSME 7.99 18-03-2022 Approved
11 ME Rebursement of Patent grant MSME SCHEME D.Y.Shahare Patent grant MSME SCHEME MSME 0.75 15-03-2022 Approved
12 ME 21st century: Recent trends,challenges and future in Renevable Energy. Dr.J.P.Giri Dr. Vijay Khawale AICTE ATAL 3.6 25-04-2022 Rejected

Grants and Funding 2020-21

SN Dept. Title of Proposal Name of Coordinator/s Funding Agency Funding Scheme Amount (Lakhs) Date of Submission Status: Submitted/ Sanctioned
1 ME Design And Development Of Automatic Dhara Device For Various Musculo-Skeletal Disorders D. Y. Shahare& Dr.ViashaliKuchewar BIRAC   Biotechnology IGNITION Grant   3906000   Sep-15   Submitted
2 ME “Performance Investigation Of Adhesive Bonded Tools For Turning Operation” Dr. Shrikant R. Jachak & Dr. Jayant P. Giri AICTE RPS 2200000 27/11/2020 Submitted
3 ME Technology Based Entrepreneurship Development Programme (TEDP) Through Online Platform Dr.S.S.Chaudhari, Prof.A.P.Edlabadkar DST TEDP 280000 29-06-2020 Sanction
4 ME INDIA-JAPAN COOPERATIVE SCIENCE PROGRAMM For Joint Workshop Dr.S.S.Chaudhari, Prof.A.P.Edlabadkar DST IJCSP 1800000 01-09-2020 Compliance Submitted
5 ME Sonic Analysis System As An Effective Means Of NDT Analysis For Cast Iron Nodularity Measurement Instrumentation Dr.S.S.Chaudhari, Prof.A.P.Edlabadkar, Prof.R.V.Adkane, Prof.A.R.Narkhede DST TECHNOLOGY DEVELOPMENT PROGRAMME 17730000 27-10-2020 Under Consideration
6 ME Design, Development And Performance Analysis Of Optically Concentrated Mult Dr.S.S.Chaudhari, Prof.Y.Y.NandurkarProf.A.P.Edlabadkar DST TECHNOLOGY DEVELOPMENT PROGRAMME 4075000 10-11-2020 Under Consideration
7 ME Artificial Intelligence bsed Monitoring system of ventilator Dr J P Giri, Dr PunitFulzele, R B Chadge DDP DST 1820000 15-11-2020 Submitted
8 ME Advances in mechanical engineering Symposia A S BONDE SERB BRNS 100000 Nov 2020 Submitted
9 ME Recent Advances in l engineering materials M K MENDHE BRNS Symposia 100000 26 Nov Submitted
10 ME Design And Development Of Automatic Dhara Device For Various Musculo-Skeletal Disorders D. Y. Shahare& Dr.ViashaliKuchewar DST   DDP   36.96 LAKH   12 OCT   Submitted
11 ME E Learning commerce for rural people D. Y. Shahare DST   27 LAKH 30 Oct Submitted
12 ME Investigation of Effect of Heat input and Multipass Welding onDissimilar Joint of 316L ASS and 430 FSS Dr. S.P.Ambade SERB SUPRA   38.80 LAKH 24/06/2021 Submitted
13 ME Advances in Thermal Engineering   Prof. V.M.Korde SERB Seminar Grant: 2 Day seminar   1,00,000/- 26/06/2021 Submitted
14 ME Design, Analysis and Implementation of Optimized controller for Hybrid Electric Vehicle 1.Prof. Narendra Giradkar 2. Prof. Sanjeev Gokhale CPRI ,Banglore RESEARCH SCHEME ON POWER (RSOP)   35,15,040/ 14.06.2021 Submitted
15 ME Design and Analysis of Experiments: A Research Approach Dr. S. R. Jachak AICTE ATAL 1.5 Lakh 04.03.2021 Submitted

Grants and Funding 2019-20

  Sr. No. Name of Agency Agency Contact Details / Link Scheme Name of Faculty (s) Project Title Submitted on Requested Funding Amount
1.       DST https://dst.gov.in/call-for-proposals DST RPS DR. S. S. CHAUDHARI   Foundry Automation Submitted July 2019 19 Lacs
2.       MNRE https://mnre.gov.in/solar/schemes MNRE  (DR. R. L. SHRIVASTAVA)   Optimization of Solar System Design Submitted August 2019 25 Lacs
3.       MODROB https://www.aicte-india.org/content/inviting-proposals-under-modrob-scheme-institutions-approved-aicte-rural-areas MODROB  (DR. J. P. GIRI) 2019 3D Printing for Medical Application Submitted August 20 Lacs
4.       AICTE RPS https://www.aicte-india.org/content/%E2%80%8Binvitation-applications-under-aqis-rps-ner-scheme AICTE RPS (DR. R. B. CHADGE)   Performance improvement using Fuel cells Submitted July 2019 12.5 Lacs
5.       DST SG https://dst.gov.in/call-for-proposals DST SG In process Recent Trends and development in Automobile engineering.   1.5 Lacs
6.       AICTE https://www.aicte-india.org/bureaus/rifd/AQIS AICTE STTP DR. S. S. CHAUDHARI , Prof. A. P. Edlabadkar   STTP on “Bridging the gap between Mechanical Industry practices and Mechanical engineering curricula” Submitted Jan   2020 2.0  Lakh
7.       AICTE https://www.aicte-india.org/atal AICTE ATAL (DR. A.  V. KALE)   AICTE Training and Learning  FDP (ATAL) Submitted 14thMarch  2020 2.1  Lakh
8.       Ministry of Science and Technology www.nstedb.com › New_Programmes › NIDHI-TBI   1. 2.   NIDHI -TBI (DR. S. S. Khedkar)   NIDHI -TBI Submitted Sep 2019 17.5  Core
Location
Yeshwantrao Chavan College of Engineering
Hingna Road, Wanadongri, Nagpur- 441110
State : Maharashtra
Country : India
Campus Map
We are a professional tile processing factory. Recently, it has reached cooperation with some Louis Vuitton replicas manufacturers to provide them with high-quality porcelain bag materials.
Call us on
Phone - +91-7104-295083, 295085
Phone (Principal office) +91-7104-295083, 09764996477

Designed & Developed by : Innovinc Services

replica watches replique montre imitation watches replica Rolex fake watches
ssl-certificates
Home Disclaimer & Privacy Policy Contact us